TY - JOUR
L1 - http://rhis.czasopisma.pan.pl/Content/118227/PDF/33_ACE-00113%20poprawiony-ok_B5.pdf
L2 - http://rhis.czasopisma.pan.pl/Content/118227
IS - No 4
EP - 579-591
KW - Track Geometry
KW - Horizontal Curvature
KW - Use of Moving Chord
KW - Verification of a New Method
A1 - Koc, Władysław
PB - WARSAW UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING and COMMITTEE FOR CIVIL ENGINEERING POLISH ACADEMY OF SCIENCES
VL - Vol. 66
CY - In the paper, the issue of determining the horizontal curvature of the railway track axis was discussed to define unknown geometric characteristics of the measured route (location of straight and arched sections, circular arc radii, transition curve lengths, etc.). This problem has not been solved yet, and so far geometrical characteristics have been identified by approximate methods (e.g. horizontal arrow chart). Operating the angles of tangent to the geometrical layout (resulting from the very definition of curvature) seems very difficult in a real railway track reproduced on the basis of measurements. Therefore, a new concept has emerged to determine the curvature of the track not with the use of tangent but corresponding chords. In this way, the idea of curvature determination using the method of changing the slope angles of the moving chord was developed. Verification of the proposed method, carried out on a clearly defined basic geometric system of tracks, showed a sufficient compliance of the obtained curvature charts with the charts of the corresponding geometric solution. In order to use this method, one must know the coordinates of the points of a given section of the route in the Cartesian system.
T1 - The Method of Determining Horizontal Curvature in Geometrical Layouts of Railway Track with the Use of Moving Chord
SP - 579-591
DA - 2020.12.11
UR - http://rhis.czasopisma.pan.pl/dlibra/publication/edition/118227
T2 - Archives of Civil Engineering
DOI - 10.24425/ace.2020.135238
ER -