@ARTICLE{Hrytsay_Ihor_Features_2024, author={Hrytsay, Ihor and Slipchuk, Andrii}, volume={vol. 71}, number={No 2}, journal={Archive of Mechanical Engineering}, pages={213-226}, howpublished={online}, year={2024}, publisher={Polish Academy of Sciences, Committee on Machine Building}, abstract={The paper presents the results of a simulation on a 3D model of undeformed chips and cutting forces during three-pass gear cutting using the power skiving method. At the level of individual blades and teeth in successive angular cutting positions, the main component of the cutting force and the tangential force on the cutter axis are shown. The analysis of the forces acting on a single gear tooth and the continuous cutting forces allowed the development of a methodology for the selection of rational cutting modes – the value of the axial feed, the number of passes with different cutting depths in order to ensure the minimum time consumption and to achieve the required accuracy of the gears in terms of the parameter of the permissible angular deviation of the profile of the cut gear. It is shown that, provided the required machining accuracy is ensured, higher productivity is achieved by increasing the axial feed at a lower depth of cut and increasing the number of passes, rather than by reducing the feed and increasing the depth of cut.}, type={Article}, title={Features of using the power skiving method for multi-pass cutting of internal gears}, URL={http://rhis.czasopisma.pan.pl/Content/130874/PDF/AME_2024_8.pdf}, doi={10.24425/ame.2024.149636}, keywords={internal gear, power skiving, passes, chips, forces}, }