@ARTICLE{Ryniewicz_Anna_Maria_Strength_2018, author={Ryniewicz, Anna Maria and Machniewicz, Tomasz and Ryniewicz, Wojciech and Bojko, Łukasz}, volume={vol. 65}, number={No 4}, journal={Archive of Mechanical Engineering}, pages={515-525}, howpublished={online}, year={2018}, publisher={Polish Academy of Sciences, Committee on Machine Building}, abstract={The functionality of a prosthesis is determined by clinical procedures, the manufacturing technology applied, the material used and its strength parameters. The aim of the paper is to evaluate the static strength and fatigue strength of acrylic construction materials directly after the process of polymerisation and for aged materials. It has been confirmed that the deformation speed of the tested materials has an evident impact on their mechanical characteristics. With greater deformation speed, a consistent increase in the material elasticity was observed in static compression tests, which was accompanied by a reduction in engineering stresses at the final stage of deformation. The greatest fatigue strength was observed for Vertex. It was by about 33% greater than the strength of Villacryl – the material that has the lowest fatigue properties. The resistance of acrylic polymers to cyclic loading applied with the frequency of 1 Hz may become an indication for the selection of the material to be used in the clinical procedures in which a patient is provided with full dentures.}, type={Artykuły / Articles}, title={Strength tests of the polymers used in dental prosthetics}, URL={http://rhis.czasopisma.pan.pl/Content/109464/PDF/AME_125440.pdf}, doi={10.24425/ame.2018.125440}, keywords={acrylic materials, aging of a material, static strength, fatigue strength}, }