Applied sciences

Geodesy and Cartography

Content

Geodesy and Cartography | 2018 | vol. 67 | No 1 |

Abstract

Polish spatial data infrastructure dates back 2010, the year when the Spatial Information Infrastructure Act transposing INSPIRE Directive entered into force. The present study provides valuable insight into the current status of Polish spatial data infrastructure (PSDI) as well as lessons learnt from so far efforts in implementing the principles and provisions of the INSPIRE Directive. Particular respect is given to policy, interoperability of data as well as cooperation between actors involved in PSDI establishment and maintenance. Data managed by the Surveyor General (SG), perceived as a backbone of a spatial data infrastructure, are of special importance. Finally, some conclusions and recommendations for further developments are given to foster SDI implementation in Poland. Results of the analysis clearly show that Polish spatial data infrastructure is in line with INSPIRE, and in a half of way being fully operational.
Go to article

Abstract

Population density varies sharply from place to place on the whole territory of Poland. The largest number of people per 1 km2 is 21,531, while uninhabited areas account for about 48% of the country. Such uneven, non-Gaussian distribution of the data causes some difficulty in choosing the classification method in geometric choropleth maps. A thorough evaluation of a geometric choropleth map of population data is not possible using only traditional indicators such as the Tabular Accuracy Index (TAI). That is why the aim of the article is to develop an innovative index based on distance analysis and neighbour analysis of grid cells. Two indexes have been suggested in this paper: the Spatial Distance Index (SDI) and the Spatial Contiguity Index (SCI). The paper discusses the use of five classification methods to evaluate choropleth maps of population data, like head-tail breaks, natural breaks, equal intervals, quantile, and geometrical intervals. A comprehensive assessment of such geometric choropleth maps is also done. The research was conducted for the whole territory of Poland, using data from the 2011 National Census of Population and Housing. Population data are presented in the 1km grid. The results of the analysis are shown on thematic maps. A compatibility of the choropleth maps with urban-rural typology of the OECD (Organisation for Economic Co-operation and Development) was also checked.
Go to article

Abstract

The aim of the research was to analyze the possibility of using mobile laser scanning systems to acquire information for production and/or updating of a basic map and to propose a no-reference index of this accuracy assessment. Point clouds have been analyzed in terms of content of interpretation and geometric potential. For this purpose, the accuracy of point clouds with a georeference assigned to the base map objects was examined. In order to conduct reference measurements, a geodetic network was designed and also additional static laser scanning data has been used. The analysis of mobile laser scanning (MLS) data accuracy was conducted with the use of 395 check points. In the paper, application of the total Error of Position of the base-map Objects acquired with the use of MLS was proposed. Research results were related to reference total station measurements. The resulting error values indicate the possibility to use an MLS point cloud in order to accurately determine coordinates for individual objects for the purposes of standard surveying studies, e.g. for updating some elements of the base map content. Nevertheless, acquiring MLS point clouds with satisfying accuracy not always is possible, unless specific resolution condition is fulfilled. The paper presents results of accuracy evaluation in different classes of base-map elements and objects.
Go to article

Abstract

Generally, gross errors exist in observations, and they affect the accuracy of results. We review methods to detect the gross errors by Robust estimation method based on L1-estimation theory and their validity in adjustment of geodetic networks with different condition. In order to detect the gross errors, we transform the weight of accidental model into equivalent one using not standardized residual but residual of observation, and apply this method to adjustment computation of triangulation network, traverse network, satellite geodetic network and so on. In triangulation network, we use a method of transforming into equivalent weight by residual and detect gross error in parameter adjustment without and with condition. The result from proposed method is compared with the one from using standardized residual as equivalent weight. In traverse network, we decide the weight by Helmert variance component estimation, and then detect gross errors and compare by the same way with triangulation network In satellite geodetic network in which observations are correlated, we detect gross errors transforming into equivalent correlation matrix by residual and variance inflation factor and the result is also compared with the result from using standardized residual. The results of detection are shown that it is more convenient and effective to detect gross errors by residual in geodetic network adjustment of various forms than detection by standardized residual.
Go to article

Abstract

In this article, the classification of underground space types is analyzed. It is established that there are objects that are taxed in the tax code of Ukraine and there are those that are not taxed. The results of the research are justified by the lack of mechanisms and technical solutions of three-dimensional objects of commercial space taxation, which have been intensively developing in Ukraine. The ways of solving legal conflicts regarding registration and taxation of real estate objects are suggested. Based on the study of the legislative base and normative legal documents in the sphere of land relations, a classifier of three-dimensional space objects, which today are fully or partially used for commercial purposes in various types of economic activity has been proposed. The analysis of the regulatory and legal framework regarding the taxation of underground space facilities has been carried out. Objects for which the taxation of land is charged and those objects for which there is no charge for the use of underground space have been identified. A methodology for the justified calculation of a decreasing percentage ratio for calculating a normative monetary evaluation (NME) is developed for the cases where the object of an underground commercial space is located at a distance from the center in one of the proposed zones.
Go to article

Abstract

Activities related to parking of transport, today have become widespread. While parking taxes for vehicles are one of the most important sources of local budgets in countries with established traditions of local government. The tax for parking spaces for vehicles is a relatively new collection in the tax system of Ukraine, which is due to the recent reform in tax legislation. Therefore, the scientific coverage of this subject is currently insufficiently investigated. In the article typical permissive documents are considered when decorating parking lots, and dependence that contradicts the current land legislation affects local revenues to the budget is established. The discrepancy between the general approaches of payment for land is established. For comparison, the approach of parking taxation, for which there is no land management documentation, and the main reason is the permission from the public enterprise for the maintenance of green spaces is considered. The analysis of the current state of the transport scheme of the city shows that in conditions of growth of elaborate road schemes and with insufficient rates of increase in its capacity to contain traffic growth it is advisable to increase the carrying capacity of transport lines and the development of mass passenger transport in cities with a planned increase in average capacity of rolling stock. Also, using traffic management is necessary to ensure that special conditions for the passage of the public transport network.
Go to article

Abstract

Land use/land cover (LULC) maps are important datasets in various environmental projects. Our aim was to demonstrate how GEOBIA framework can be used for integrating different data sources and classification methods in context of LULC mapping.We presented multi-stage semi-automated GEOBIA classification workflow created for LULC mapping of Tuszyma Forestry Management area based on multi-source, multi-temporal and multi-resolution input data, such as 4 bands- aerial orthophoto, LiDAR-derived nDSM, Sentinel-2 multispectral satellite images and ancillary vector data. Various classification methods were applied, i.e. rule-based and Random Forest supervised classification. This approach allowed us to focus on classification of each class ‘individually’ by taking advantage from all useful information from various input data, expert knowledge, and advanced machine-learning tools. In the first step, twelve classes were assigned in two-steps rule-based classification approach either vector-based, ortho- and vector-based or orthoand Lidar-based. Then, supervised classification was performed with use of Random Forest algorithm. Three agriculture-related LULC classes with vegetation alternating conditions were assigned based on aerial orthophoto and Sentinel-2 information. For classification of 15 LULC classes we obtained 81.3% overall accuracy and kappa coefficient of 0.78. The visual evaluation and class coverage comparison showed that the generated LULC layer differs from the existing land cover maps especially in relative cover of agriculture-related classes. Generally, the created map can be considered as superior to the existing data in terms of the level of details and correspondence to actual environmental and vegetation conditions that can be observed in RS images.
Go to article

Abstract

Technical development, new applications and requests for increased accuracy in georeferencing are setting new demands for accuracy and reliability of reference frames. Due to crustal deformations and local movements of benchmarks, a static reference network deteriorates with time, thus eventually requiring update of the whole system. Technically, renewal of a reference frame is straightforward and should be done whenever enough new data or updated information exist to get an improvement in accuracy. An example is the International Terrestrial Reference Frame, ITRF, which is renewed regularly. The situation is more complicated with national reference frames which may have been given a legal status, and parameters defined by the national legislation. Even without that, renewal and implementation of such a frame is a multi-million euro project taking years to complete. Crustal deformations and movements deteriorate static reference frames (defined by fixed/static coordinates of benchmarks) with time. Eventually, distortions in a static reference frame will become bigger than the uncertainties of GNSS measurements, thus deteriorating the obtainable accuracy of the measurement technique. Instead of a static reference frame, one can use semi-kinematic or kinematic approach where either the transformation from global to the national reference frame or the coordinates of reference frame benchmarks are time-dependent. In this paper we give a short overview of the topic, and discuss on technical issues and future aspects of the reference frames in the viewpoint of National Mapping and Cadastre Authorities (NMA) with an example on the national strategy in Finland.
Go to article

Abstract

The construction of transmission infrastructure and its functioning imposes the obligation on transmission companies to have a legal title to land. Both in Poland and in Canada, the title particularly results from the established easements subject to registration in public information systems. Due to different historical, social, and economic conditions, the specificity of legal regulations and technical solutions related to the registration of rights to land property is different in both countries. This results from the functioning and the substantive scope of particular systems of information on land property. Such systems are regulated by independent, internal rules of each of the countries. In Poland, easement is subject to registration in the land and mortgage register. In Canada, a federation country, it depends on legal regulations of particular provinces. The research objective of the article is the analysis of the way of registration of easements established for transmission companies in Poland and in Canada in the Ontario and Quebec provinces. The analysis covers the scope of registration of the said right in systems of information on land property. The evaluation of the applied solutions particularly involves pointing out those which to the greatest extent guarantee the safety of land property turnover. The best result is obtained in Canada in the Ontario province.
Go to article

Abstract

This article analyzes the technology of creating and updating a digital topographic map using the method of mapping (generalization) on an updated map with a scale of 1 : 25;000 based on the source cartographic material. The main issue in the creation of digital maps is the study of map production accuracy and error analysis arising from the process of map production. When determining the quality of a digital map, the completeness and accuracy of object and terrain mapping are evaluated. The correctness of object identification, the logical consistency of the structure, the and representation of objects are assessed. The main and the most effective method, allowing to take into account displacement errors for the relief during image processing, is orthotransformation, but the fragment used to update the digital topographic map needs additional verification of its compliance with the scale requirements of the map. Instrumental survey will help to clearly identify areas of space image closer to nadir points and to reject poor quality material. The software used for building geodetic control network should provide stable results of accuracy regardless on the scale of mapping, the physical and geographical conditions of the work area or the conditions of aerial photography.
Go to article

Editorial office

EDITOR-IN-CHIEF:

ELŻBIETA BIELECKA

Military University of Technology, Warsaw, Poland

e-mail: elzbieta.bielecka@wat.edu.pl

DEPUTY EDITOR-IN CHIEF:

ANNA KŁOS

Military University of Technology, Warsaw, Poland

e-mail: anna.klos@wat.edu.pl

THEMATIC EDITORS

Geodesy

KRZYSZTOF SOŚNICA

Wrocław University of Environmental and Life Sciences, Poland

Geodynamics

JANUSZ BOGUSZ

Military University of Technology, Warsaw, Poland

Photogrametry and Remote Sensing

PIOTR SAWICKI

University of Warmia and Mazury in Olsztyn, Poland

Cartography and GIS

DARIUSZ DUKACZEWSKI

Institute of Geodesy and Cartography, Warsaw, Poland

Cadastre

RYSZARD ŹRÓBEK

University of Warmia and Mazury in Olsztyn, Poland

Statistical Editor

PAWEŁ KAMIŃSKI

Military University of Technology, Warsaw, Poland

Technical Editor

BEATA CAŁKA

Military University of Technology, Warsaw, Poland

Language Editor

PETER HALLS

York University, UK

SCIENTIFIC EDITORIAL BOARD

JOSEF ADAM, University of Technology and Economics, Hungary

TEMENOUJKA BANDROVA, University of Architecture, Civil Engineering and Geodesy, Bulgaria

MYRIAM SOUSANA BARRERA LOBATON, National University of Colombia, Colombia

ALEKSANDRA BUJAKIEWICZ, Koszalin University of Technology, Poland

ADAM CHRZANOWSKI, University of New Brunswick, Canada

ALGIMANTAS ČESNULEVIČIUS, Vilnius State University, Lithuania

DEMETRIOU DEMETRIS, District Land Consolidation Officer of Larnaca and Famagusta, Cyprus

DOROTA GREJNER-BRZEZIŃSKA, Ohio State University, USA

MANUEL HERNANDEZ-PAJARES, Universitat Politècnica de Catalunya, Spain

SHUANGGEN JIN, Chinese Academy of Sciences, China

AMIR KHODABANDEH, Curtin University of Technology, Australia

JAN KRYNSKI, Institute of Geodesy and Cartography, Poland

BOFENG LI, Tongji University, China

XINGXING LI, Wuhan University, China

JAAKKO MAKINEN, Finnish Geodetic Institute, Finland

BEATA MEDYNSKA-GULIJ, Adam Mickiewicz University, Poland

HELMUT MORITZ, Graz University of Technology, Austria

PAVEL NOVAK, University of Western Bohemia, Czech Republic

EDWARD OSADA, University of Lower Silesia, Poland

VOJTECH PALINKAS, Geodetic Observatory Pecný, Czech Republic

JERZY ROGOWSKI, Gdynia Maritime University, Poland

HEINZ RUTHER, University of Cape Town, RSA

MARCELO SANTOS, University of New Brunswick, Canada

JÜRGEN SCHWEIKART, Beuth University of Applied Sciences Berlin, Germany

MONIKA SESTER, Universität Hannover, Germany

MICHAEL SIDERIS, University of Calgary, Canada

GABRIEL STRYKOWSKI, Technical University of Denmark, Denmark

ZBIGNIEW WISNIEWSKI, University of Warmia and Mazury in Olsztyn, Poland

KEFEI ZHANG, RMIT University, Australia

JAROSLAW S. YATSKIV, Main Astronomical Observatory, Ukraine

Contact

EDITOR-IN-CHIEF

Elzbieta Bielecka

Military University of Technology

Faculty of Civil Engineering and Geodesy

2 Witolda Urbanowicza St (building 53)

00-908 Warsaw, Poland

tel.: +48 261-83-70-96

e-mail: elzbieta.bielecka@wat.edu.pl

DEPUTY EDITOR-IN CHIEF

Anna Kłos

Military University of Technology

Faculty of Civil Engineering and Geodesy

2 Witolda Urbanowicza St (building 53)

00-908 Warsaw, Poland

e-mail: anna.klos@wat.edu.pl

Instructions for authors

The Geodesy and Cartography accepts a wide range of papers including original research papers, original short communication papers, review articles, symposium pieces and book reviews. Details of submission are provided below. Please, note, that at the submission stage, the author(s) ensure(s) that the submitted work will not be published elsewhere in any language without the consent of the copyright owners. All co-authors also agree on the publication ethics statement.

For all parties involved in the act of publishing (the author, the journal editor(s), the peer reviewer and the publisher) it is necessary to agree upon standards of expected ethical behaviour. The ethics statements for GEODESY AND CARTOGRAPHY are based on the Committee on Publication Ethics (COPE) Best Practice Guidelines for Journal Editors (https://publicationethics.org/resources/guidelines ).

TYPES OF MANUSCRIPTS

Original Research papers:

Research papers can have 6000 words in length, although longer articles will be accepted on an occasional basis if the topic demands this length of treatment.

Original Short communication papers:

Short communication papers can have 2500 words as a maximum and contain at most 1 table and 3 figures. Such a note is technical and well-focused, for example illustrating a new technique, describing a well worked-out case study or a specific new algorithm.

Original research and short communications papers should contain the following sections: Abstract (max. of 250 words), Introduction, Data used and methods applied, Results, Discussion, Conclusions, Acknowledgments, References

Review article:

The journal also considers short reviews (not exceeding 12 pages in print) intended to debate recent advances in rapidly developing fields that are within its scope. Such articles may have ample references. Reviews should contain the following sections: Abstract (max. of 250 words), Introduction, Topics (with headings and subheadings), Conclusions and Outlook, Acknowledgments, References

Symposium pieces:

Symposium pieces describe a research symposium or seminar and present the topic covered in the form of a news brief, opinion piece, or mini-review. A news brief summarizes a few talks on the same general topic or issues at a given symposium. This can include a summary of the discussion that followed the symposium or the significance of the talks at a large symposia to a particular field. It is important to indicate the main point of the symposium.

An opinion piece discusses the personal perspectives after a given symposium, including an analysis of the symposium and how this affected the author.

A mini-review can be based on a theme from a given symposium. This may require the author(s) to review articles written by a speaker at that symposium.

These articles should be no more than 3,000 words. All symposium pieces should include the following sections:Abstract (max. of 250 words), Introduction, Topics (with headings and subheadings) [specifically required for a mini-review], Conclusions and Outlook, References

Book reviews:

The journal publishes reviews for books falling within its aims and scope. A book review consists of maximum 250 words. It should clearly identify the book's contents, the addition to current books and literature and a recommendation by the reviewer. All book reviews should be clearly identified as such and will be handled by the journal's book review editor.

LEGAL REQUIREMENTS

The author(s) guarantee(s) that the manuscript will not be published elsewhere in any language without the consent of the copyright owners, that the rights of the third parties will not be violated, and that the publisher will not held legally responsible should there be any claims for compensation.

Authors wishing to include figures or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.

ETHICAL RESPONSIBILITIES OF AUTHORS

Submission of the manuscript implies: that the work has not been published before (except in form of an abstract or as a part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities at the institution where the work was carried out.

In case the manuscript has more than one author its submission should include the list specifying contribution of each author to the manuscript with indicating who is the author of the concept, assumptions, research methodology, data processing. Major responsibility is on the corresponding author.

The Editor will counteract in GEODESY AND CARTOGRAPHY against Ghostwriting, i.e. when someone substantially contributed to the preparation of the manuscript but has neither been included to the list of authors nor his role is mentioned in the acknowledgements as well as Ghost authorship, i.e. when the author/co-author did not contribute to the manuscript or his contribution is negligible. Any detected case of Ghostwriting and Ghost authorship will be exposed and the appropriate subjects, i.e. employers, scientific organisations, associations of editors etc, will be informed.

MANUSCRIPT SUBMISSION

The manuscripts are submitted online https://www.editorialsystem.com/geocart/and should be submitted in Word. Please, do not exceed the number of words intended to a specific submission. Please, count the number of words before submitting, with abstract, acknowledgements and references excluded.

Names of authors and their affiliation should be removed from the manuscripts for the review process in order to have a fair evaluation of their manuscript. All authors of the manuscript are responsible for its content; they must have agreed to its publication and have given the corresponding author the authority to act on their behalf in all matters pertaining to publication. The Corresponding Author is responsible for informing the coauthors of the manuscript status throughout the submission, review, and production process. The editorial system requires: the name(s) of the author(s), the name(s) and address(es) of the affiliation(s) of the author(s), the e-mail address of the corresponding author, the 16-digit ORCID number of the author(s). The corresponding author is required to provide his/her ORCID number. ORCID numbers of co-authors are not necessary, but advised.

Manuscript preparation

Manuscripts should be typed in single-line spacing throughout on the A4 sheet with 2.5 cm margins. Use plain 11-point Times Roman font for text, italics for textual emphasis, bold for mathematical vectors.

1. Abstract: The paper must be preceded by a sufficiently informative abstract presenting the most important results and conclusions. It should not be longer than 250 words and should not contain any unexplained abbreviations and unspecified references.

2. Keywords: Three to five keywords should be supplied. These are used for indexing purposes.

3. Introduction: It should explicitly state the purpose of the investigation and give a short review of the pertinent literature.

4. Main text: It should include all methods and input data (working details must be given concisely; well-known operations should not be described in details); results presented in tabular or graph form, with appropriate statistical evaluation, discussion of results - statement of conclusions drawn from the work and conclusions.

5. Acknowledgements: Please, include all institutions, names or numbers of grants that require acknowledgement. The names of funding organizations or institutions providing data should be given in full. This information is mandatory for all submitted. papers

6. References: The list of references should be prepared in alphabetical order and should only include works that are cited in the text and that have been published or accepted for publication. Personal communications could only be mentioned in the text. References in the text, should be cited by author(s) last name and year: e.g. (Beutler, 2003a), (Featherstone and Kirby, 2000), (Schwarz et al., 1990), (Sjöberg et al., 2000; Strykowski, 2001b; 2002). The details on the reference list preparation is provided below.

7. Formulae and symbols: They must be written legibly and will be typeset in italics. One-layer indexing is preferable. Numbering of formulae, if necessary should be given in brackets fitted to the right margin. use the equation editor or MathType for equations

8. Illustrations and tables: All figures (photographs, graphs or diagrams) and tables should be cited in the text and numbered consecutively throughout. Lowercase roman letters should identify figure parts. Figure legends must be brief and must contain self-sufficient explanations of the illustrations. Each table should have a title and a legend explaining any abbreviation used in that table. Tables and illustrations have to be placed in the text and send as separate files.

9. Units: SI units must be used.

10. Short title: Please, include a running head consisting of at most 60 characters. This concise banner represents the title of the article and must be submitted by the author(s).

Proofreading

Proofreading is the responsibility of the author. Corrections should be clear; standard correction marks should be used. Corrections that lead to a change in the page layout should be avoided. The author is entitled to formal corrections only. Substantial changes in content, e.g. new results, corrected values, title and authorship are not allowed without the approval of the editor. In such case please contact the Editor-in-chief before returning the proofs.

Reference list

a. Journal Article (one author)

Nikora, V. (2006). Hydrodynamics of aquatic ecosystems: spatial-averaging perspective. Acta Geophysica, 55(1), 3-10. DOI: 10.2478/s11600-006-0043-6.

b. Journal Article (two or more authors)

Cudak, M. and Karcz J. (2006). Momentum transfer in an agitated vessel with off-centred impellers. Chem. Pap. 60(5), 375-380. DOI: 10.2478/s11696-006-0068-y.

c. Journal article from an online database

Czajgucki Z., Zimecki M. & Andruszkiewicz R. (2006, December). The immunoregulatory effects of edeine analogues in mice [Abstract]. Cell. Mol. Biol. Lett. 12(3), 149-161. Retrieved December 6.

d. Book (one author)

Baxter, R. (1982). Exactly Solvable Models in Statistical Mechanics. New York: Academic Press.

e. Book (two or more authors)

Kleiner, F.S., Mamiya C.J. and Tansey R.G. (2001). Gardner’s art through the ages (11th ed.). Fort Worth, USA: Harcourt College Publishers.

f. Book chapter or article in an edited book

Roll, W.P. (1976). ESP and memory. In J.M.O. Wheatley and H.L. Edge (Eds.), . (pp. 154-184). Springfield, IL: American Psychiatric Press.

g. Proceedings from a conference

Field, G. (2001). Rethinking reference rethought. In Revelling in Reference: Reference and Information Services Section Symposium, 12-14 October 2001 (pp. 59-64). Melbourne, Victoria, Australia: Australian Library and Information Association.

h. Online document

Johnson, A. (2000). Abstract Computing Machines. Springer Berlin Heidelberg. Retrieved March 30, 2006, from SpringerLink http://springerlink.com/content/w25154. DOI: 10.1007/b138965.

i. Report

Osgood, D. W., and Wilson, J. K. (1990). Covariation of adolescent health problems. Lincoln: University of Nebraska. (NTIS No. PB 91-154 377/AS).

j. Government publication

Ministerial Council on Drug Strategy. (1997). The national drug strategy: Mapping the future. Canberra: Australian Government Publishing Service.

MANUSCRIPT REVIEW PROCEDURE

The editor of a peer-reviewed journal is responsible for deciding which articles submitted to the journal should be published, and, moreover, is accountable for everything published in the journal. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement and plagiarism. The editor may confer with other editors or reviewers when making publication decisions. The editor maintain the integrity of the academic record, preclude business needs from compromising intellectual and ethical standards, and always be willing to publish corrections, clarifications, retractions and apologies when needed. The editor evaluate manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s). The editor do not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

The editor is guided by COPE’s Guidelines (https://publicationethics.org/resources/guidelines) for Retracting Articles when considering retracting, issuing expressions of concern about, and issuing corrections pertaining to articles that have been published in GEODESY and CARTOGRAPHY.

Peer review assists the editor in making editorial decisions and, through the editorial communication with the author, may also assist the author in improving the manuscript.

Any manuscripts received for review is treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor.

Manuscript evaluations are assigned one of four outcomes: Accept without changes, accept after changes suggested by reviewer, rate manuscript once again after major changes and another review, reject, withdraw

Manuscripts requiring minor revision (accept after changes suggested by reviewer) not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. Normally, manuscripts that receive a "Rate manuscript once again after major changes and another review " decision have only one additional chance for revision and the revised version should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected. On acceptance, manuscripts are subject to editorial amendment to suit house style. The article should be withdraw due to technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate r structure of the text) or plagiarism (more than 30% of plagiarism).

Reviewers are requested to provide theirs comments in two forms; confidential information for Editors (it will not appear in the review sent to the authors) and information for Authors are included. Reviewers are also requested to answer YES/NO to the questions included in a review form. These will be useful for the Editorial Board to assess the quality of the manuscript. If NO answer is provided, please justify.

Transfer of Copyright Agreement

Once the paper is initially accepted, the authors are assumed to have transferred the copyright of the paper to the publisher.

Charges

GEODESY AND CARTOGRAPHY is published in Open Access, which means that all articles are available on the internet to all users immediately upon publication free of charge for the readers. Authors are invited so a declaration that they are ready to cover the costs of printing their article. In addition, each color page will be charged an additional fee according to the current cost of printing. Otherwise, the paper will be printed in black-white. More details see in Information for Authors https://www.editorialsystem.com/geocart/

Open Access policy

OPEN ACCESS

GEODESY AND CARTOGRAPHY is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY-NC-SA 4.

All articles published in GEODESY AND CARTOGRAPHY are available on the internet to all users immediately upon publication free of charge for the readers. Authors are invited so a declaration that they are ready to cover the costs of printing their article. In addition, each color page will be charged an additional fee according to the current cost of printing. Otherwise, the paper will be printed in black-white. More details see in Information for Authors www.editorialsystem.com/geocart

ETHIC POLICY

Editor Responsibilities

The editor of GEODESY AND CARTOGRAPHY is guided by COPE’s Guidelines (https://publicationethics.org/resources/guidelines ) for Retracting Articles when considering retracting, issuing expressions of concern about, and issuing corrections pertaining to articles that have been published in the journal. The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s). The editor do not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

The editor seeks so ensure a fair and appropriate peer review process. Editors recuse themselves (i.e. ask a co-editor, associate editor or other member of the editorial board instead to review and consider) from considering manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or (possibly) institutions connected to the papers. Editors require all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.

Reviewer Responsibilities

Peer review assists the editor in making editorial decisions and, through the editorial communication with the author, may also assist the author in improving the manuscript. Any invited referee who feels unqualified to review the research reported in a manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted.

Any manuscripts received for review is treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Reviews should be conducted objectively. Personal criticism of the author is inacceptable. Referees should express their views clearly with appropriate supporting arguments.

Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge.

Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.

Author Responsibilities

Authors reporting results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.

The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.

An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.

Proper acknowledgment of the work of others must always be given. Authors should also cite publications that have been influential in determining the nature of the reported work.

Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.

The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.

If the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, the authors must clearly identify these in the manuscript.

All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.

When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.

Publisher’s Confirmation

In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.

Additional information

The Geodesy and Cartography is a semi-annually scientific journal publishing peer-reviewed articles with original solutions of theoretical, experimental or applicable problems in the field of geodesy, surveying engineering, cartography and GIS, cadastre and land management, photogrammetry, remote sensing and related disciplines. Besides original research papers, the journal includes commissioned review papers on topical subjects and special issues arising from chosen scientific symposia or workshops.

The Geodesy and Cartography is published under the umbrella of the Committee on Geodesy of the Polish Academy of Sciences (PAS).

Indexed in:

Geodesy and Cartography is covered by the following services:

Arianta, Astrophysics Data System (ADS), Baidu Scholar, BazTech, Clarivate Analytics - Emerging Sources Citation Index, Clarivate Analytics - Web of Science, CNKI Scholar (China National Knowledge Infrastructure), CNPIEC, Current Geographical Publications, Dimensions, DOAJ (Directory of Open Access Journals), EBSCO (relevant databases), EBSCO Discovery Service, Elsevier - Engineering Village, Genamics JournalSeek, GeoArchive, GeoRef, Google Scholar, Index Copernicus, Japan Science and Technology Agency (JST), J-Gate, JournalTOCs, KESLI-NDSL (Korean National Discovery for Science Leaders), Microsoft Academic, Naviga (Softweco), POL-index, Primo Central (ExLibris), Publons, ReadCube, Sherpa/RoMEO, Summon (Serials Solutions/ProQuest), TDNet, Ulrich's Periodicals Directory/ulrichsweb, WanFang Data, WorldCat (OCLC)

Disclosures:

Please, note that the journal uses plagiarism detection software for all the submissions. If plagiarism is identified, the submission will be returned to the corresponding author.

Content published in this journal is blind peer-reviewed.

This page uses 'cookies'. Learn more