The presented article contains an analysis resulting from 10 years’ experience in the implementation of the POLVAL Code to mineral assets valuations carried out by Competent Valuators. It had been based on data of more than 100 performed valuations. First and foremost, challenges resulting from preferences given by various relevant regulations to the application of a market-based approach were identified. It was underlined that they prompt Valuators to compromise the quality of the database containing reference transactions. In the case of an income based approach, issues resulting from the adoption of estimates and subjective assumptions were discussed. It was indicated that this fact alone cannot create a valid argument to reject the results of such a valuation providing that they have been implemented in a coherent manner and uncertainty was reflected in the value of the applied discount rate. Separately recommended changes to the present version of the POLVAL Code were presented. In conclusion, a significant, positive role of the introduction of the POLVAL Code for the structuring processes of mineral asset valuation was indicated.
The introduction of the sustainable development elements in the construction industry leads to finding new ways of using waste minerals that are difficult in storage and recycling. Coal combustion products have been already introduced into building materials as a part of cement or concrete but they have been thought insufficiently compatible with the polymer-cement binders . The paper presents results of the mechanical properties of polymer-cement composites containing two types of mineral additives: waste perlite powder that is generated during the perlite expanding process, and calcium fly ash which is the byproduct of burning coal in conventional furnaces. Mechanical tests of polymer-cement composites modified with wastes were carried out after 28 and 90 days of curing. As a part of preliminary study specific surface area and particle size distribution of mineral wastes were determined.
Mine drainage and discharge of salt waters into water bodies belong to main environmental issues, which must be appropriately addressed by the underground coal mining industry. The large area of exploited and abandoned mine fields in the Upper Silesia Coal Basin, as well as the geological structure of the rock mass and its hydrogeological conditions require the draining and discharge of about 119 million m3/yr of mine waters. Increasing the depth of mining and the necessity of protection of mines against water hazard result in increased amounts of chlorides and sulphates in the mine waters, even by decreasing the total coal output and the number of mines. The majority of the salts are being discharged directly into rivers, partly under control of salt concentration, however from the point of the view of environment protection, the most favorable way of their utilization would be technologies allowing the bulk use of saline waters. Filling of underground voids represents a group of such methods, from which the filling of goaves (cavings) is the most effective. Due to large volume of voids resulting from the extraction of coal and taking the numerous limitations of this method into account, the potential capacity for filling reaches about 17.7 million m3/yr of cavings and unnecessary workings. Considering the limited availability of fly ash, which is the main component of slurries being in use for the filling of voids, the total volume of saline water and brines, which could be utilized, has been assessed as 3,5–6,5 million m3/yr