Analytical relations, describing the electrical fields of cylindrical piezoceramic radiators with circular polarization as a member of the cylindrical systems with the baffle in the inner cavity, using the related fields method in multiply connected regions were obtained. Comparative analysis of the results of numerical experiments performed on the frequency characteristics of the electric field of the radiating systems for different modes of radiation allow to establish a number of subtle effects of the formation of the electric field of radiators.
This paper presents the results of studies on functional possibilities of the optimization of geometric sizes and the design development of specialized resonance concentrating link (concentrator-sonotrode) with enlarged radiating surface. Developed theoretical model allows to determine the value of longitudinal and transverse sizes of each part of concentrating link providing the achievement of required features of the ultrasonic vibrating systems (gain factor of the unit and its resonance frequency). To verify the efficiency of designed model, the geometric sizes of resonance concentrating link were determined using the finite-element complex, which showed that the disagreement did not exceed 10%. The efficiency of proposed model at the determining of size and resonance characteristics of concentrating link was proved by the experiments. Theoretical and experimental studies helped to optimize the size of concentrating link while the vi- brating system developed on its base enabled the enlargement of radiating surface without decreasing the radiation intensity for the realization of technologies of cavitation treatment of liquid media
It is shown that decrease and damping of the traction force at the end of the plunger move is possible not only due to application of a special keeper design, but also due to change of the plunger shank geometric form. The computer modeling with the use of finite element method is used to analyze the influence of system geometry on force distribution along plunger movement. The damping effect is confirmed when special shape plunger shanks are used.