In a dynamic machining process, distortion in surface irregularity is a very complex phenomenon. Surface irregularities form a periodic representation of the tool profile with various kinds of disturbance in a broad range of changes in the height and length of the profile. To discern these irregularity disturbances, interactions of the tool in the form of changes perpendicular and parallel relative to the workpiece were analyzed and simulated. The individual kinds of displacement of the tool relative to the workpiece introduce distortions in the changes of height and length. These changes are weakly represented in standard height and length irregularity parameters and their discernment has been found through amplitude-frequency functions.
This article reflects on the results the use and eff ectiveness of design coding as urban design / development tool, focusing on the roles of and the relationships between the different actors playing parts in the in the design coding process: the administration, the investors, the designers, the politics and the community. It reveals the gap in professional circles that impacts the development process, which, deepened by the continuous battle between the creative, the market-driven and the regulatory modes praxis. The article is polemical in that it points to the three main parties of this collective process, referring to is as the creative, market and regulatory tyranny. The author proposes that design coding, if used correctly, could be an effective tool regulating the essentials of urbanism, leaving room for creativity and enhanced market value. Design coding as such results in improvement of the quality of both urbans space and housing architecture.
The purpose of the paper is to present the author’s reflections on the origin and popularity of various approaches to maintenance and improvement of production processes, their terminological consistency, understanding, and practical application of their principles. The author’s reflections are based on his observations made over his many years of activity as a lecturer and consultant in the area of production engineering and management. It was shown that there is a need to make scientists and practitioners aware of the relatively large degree of freedom in defining the scope and way of application of strategies of continuous improvement. The author’s proposal is to refer to all approaches to maintenance and improvement of production processes with the title “Strategies of Efficient Action” and all supporting methods as “Practices of Efficient Action”. Considerations presented in the paper can be useful in more and more efficiently applying the power of TQM, Six Sigma, Lean Manufacturing and other strategies of processes maintenance and improvement in the daily activities of companies.
This paper deals with the experimental validation of the suitability of the method for measuring radial variations of components on the process tool. The tests were conducted using a computerized PSA6, which was compared to a Talyrond 73. The results of measurement of roundness deviations as well as roundness profiles were analyzed for a sample of 70 shafts. The roundness deviations were assessed by determining the experimental errors, while the profiles obtained with the tested device were compared to those registered by the reference device using three correlation coefficients.
In recent times, the concept of hard turning has gained awareness in metal cutting as it can apparently replace the traditional process cycle of turning, heat treating, and finish grinding for assembly of hard, wear-resistant steel parts. The major apprehension in hard turning is the tool vibration, which affects the surface finish of the work piece, has to be controlled and monitored. In order to control tool vibration in metal cutting, a magnetorheological fluid damper which has received great attention in suppressing tool vibration was developed and used. Also an attempt has been made in this study to monitor tool vibration using the skewness and kurtosis parameters of acoustic emission (AE) signal for the tool holder with and without magnetorheological damper. Cutting experiments were conducted to arrive at a set of operating parameters that can offer better damping characteristics to minimize tool vibration during turning of AISI4340 steel of 46 HRC using hard metal insert with sculptured rake face. From the results, it was observed that the presence of magnetorheological damper during hard turning reduces tool vibration and there exist a strong relationship between tool vibration and acoustic emission (AERMS) signals to monitor tool condition. This work provides momentous understanding on the usage of magnetorheological damper and AE sensor to control and monitor the tool condition during turning of hardened AISI4340 steel.
After the banking crisis, the European Union (EU) introduced a framework for the restructuring and orderly liquidation of credit institutions. The overarching goal of the new rules is to manage severe banking crisis more efficiently. One of the main pillars of the European bank resolution regime are the powers of the resolution authorities to use resolution tools (sale of business, bridge bank, bad bank and bail-in). However, the question arises whether the implemented toolkit will be sufficient to effectively contain systemic banking crisis. The literature regarding empirical research on the effectiveness of the BRRD tools provides ambiguous conclusions. Therefore, the newly established resolution authorities in the EU were asked to express their opinion about their readiness to combat systemic crisis and the usefulness of the accessible toolkit. The evaluation of the effectiveness of the resolution tools in a systemic crises by the resolution authorities showed that the most effective resolution tool seems to be the bad bank, while bank liquidation was rated as the least appropriate. Nevertheless, the resolution authorities also identified many barriers for all resolution tools that may limit the ability of their implementation and possibly translate into the lower effectiveness of the resolution framework.
A short literature survey which justifies coating of ceramic cutting inserts is presented. The results reported are on selected nitride coatings, in particular nanoscale multilayer, with layers of type Ti-Zr-N, TiN, ZrN and (TiAl)N, deposited by the arc PVD method on oxidecarbide ceramic cutting inserts of type TACN and TW2 produced at the Institute of Advanced Manufacturing Technology. Measurements and quality assessments were made, including of thickness of the coatings and of their constituent micro and nanolayers, microhardness of the coating and of the substrate, surface roughness of the inserts and of the cylindrical workpieces turned with these tools. Lifetimes of the coated and uncoated inserts were compared in turning an alloy tool steel. A significant increase in lifetime of the coated TW2 cutting tools was shown.
The touch trigger probe plays an important role in modern metrology because of its robust and compact design with crash protection, long life and excellent repeatability. Aside from coordinate measuring machines (CMM), touch trigger probes are used for workpiece location on a machine tool and for the accuracy assessment of the machine tools. As a result, the accuracy of the measurement is a matter of interest to the users. The touch trigger probe itself as well as the measuring surface, the machine tool, measuring environment etc. contribute to measurement inaccuracies. The paper presents the effect of surface irregularities, surface wetness due to cutting fluid and probing direction on probing accuracy on a machine tool.
Aluminum 6082-T6 panels were joined by friction stir welding utilizing a bobbin tool. A thermal simulation of the process was developed based upon machine torque and the temperature dependent yield stress utilizing a slip factor and an assumed coefficient of friction. The torque-based approach was compared to another simulation established on the shear layer methodology (SLM), which does not require the slip factor or coefficient of friction as model inputs. The SLM simulation, however, only models heat generation from the leading edges of the tool. Ultimately, the two approaches yielded matching temperature predictions as both methodologies predicted the same overall total heat generation from the tool. A modified shear layer approach is proposed that adopts the flexibility and convenience of the shear layer method, yet models heat generation from all tool/workpiece interfaces.
The paper presents results of studies on linear synchronous motors controlled in CNC feed axes through an intelligent digital servodrive. The research includes a conceptual design of an open servodrive control system and identification of dynamic models of a test stand with an open CNC system. Advantages of robust control over the classic one are discussed. A hybrid predictive approach to robust control of milling machine X-Y table velocity is proposed and results of simulation tests are presented. Was prepared during the work for the Ministry of Science and Higher Education grant number N N502 336936, (acronym for this project is M.A.R.I.N.E. multivariable hybryd ModulAR motIon coNtrollEr), while its main purpose is the development of new rob ust position/velocity model-based control system, as well as to introduce the measurement of the actual state into the switching algorithm between the locally synthesized controllers. Such switching increases the overall robustness of the machine tool feed-drive module. The paper is the extended version of material proposed in .
In the present work, the performance of multilayer coated carbide tool was investigated considering the effect of cutting parameters during turning of 34CrMo4 Low alloy steel. It has high strength and creep strength, and good impact tenacity at low temperature. It can work at –110°C to 500°C. And EN 10083-1 34CrMo4 owns high static strength, impact tenacity, fatigue resistance, and hardenability; without overheating tendencies. The objective functions were selected in relation to the parameters of the cutting process: surface roughness criteria. The correlations between the cutting parameters and performance measures, like surface roughness, were established by multiple linear regression models. Highly significant parameters were determined by performing an Analysis of variance (ANOVA). During the experiments flank wear, cutting force and surface roughness value were measured throughout the tool life. The results have been compared with dry and wet-cooled turning. Analysis of variance factors of design and their interactions were studied for their significance. Finally, a model using multiple regression analysis between cutting speed, fee rate and depth of cut with the tool life was established.
The field of mechanical manufacturing is becoming more and more demanding on machining accuracy. It is essential to monitor and compensate the deformation of structural parts of a heavy-duty machine tool. The deformation of the base of a heavy-duty machine tool is an important factor that affects machining accuracy. The base is statically indeterminate and complex in load. It is difficult to reconstruct deformation by traditional methods. A reconstruction algorithm for determining bending deformation of the base of a heavy-duty machine tool using inverse Finite Element Method (iFEM) is presented. The base is equivalent to a multi-span beam which is divided into beam elements with support points as nodes. The deflection polynomial order of each element is analysed. According to the boundary conditions, the deformation compatibility conditions and the strain data measured by Fiber Bragg Grating (FBG), the deflection polynomial coefficients of a beam element are determined. Using the coordinate transformation, the deflection equation of the base is obtained. Both numerical verification and experiment were carried out. The deflection obtained by the reconstruction algorithm using iFEM and the actual deflection measured by laser displacement sensors were compared. The accuracy of the reconstruction algorithm is verified.
The paper describes the influence of the machining operation on a surface, which disturbs the projection of the tool profile in the form of its relative movements with respect to the object. The elements of the machine tool undergo constant wear during the machining process, it is therefore important to recognize the effects of their influence on the surface's irregularities. Amplitude-frequency analysis of lateral profiles has been used to evaluate and changes of turned lateral profiles. The results of simulation of radial and axial effects of the machine tool on surface and their spectral components were analyzed. Surfaces obtained in similar machining conditions on lathes operated in various time periods were analyzed spectrally. From the analysis of surface irregularity changes caused by disturbances in movements of the tool against the object, testifying the wear of main machine elements during its operation, the modulated, amplitude-frequency character of changes in surface irregularities of workpiece can be noticed.
The densification behavior of H13 tool steel powder by dual speed laser scanning strategy have been characterized for selective laser melting process, one of powder bed fusion based metal 3d printing. Under limited given laser power, the laser re-melting increases the relative density and hardness of H13 tool steel with closing pores. The single melt-pool analysis shows that the pores are located on top area of melt pool when the scanning speed is over 400 mm/s while the low scanning speed of 200 mm/s generates pores beneath the melt pool in the form of keyhole mode with the high energy input from the laser. With the second laser scanning, the pores on top area of melt pools are efficiently closed with proper dual combination of scan speed. However pores located beneath the melt pools could not be removed by second laser scanning. When each layer of 3d printing are re-melted, the relative density and hardness are improved for most dual combination of scanning. Among the scan speed combination, the 600 mm/s by 400 mm/s leads to the highest relative density, 99.94 % with hardness of 53.5 HRC. This densification characterization with H13 tool steel laser re-melting can be efficiently applied for tool steel component manufacturing via metal 3d printing.
To achieve better precision of features generated using the micro-electrical discharge machining (micro-EDM), there is a necessity to minimize the wear of the tool electrode, because a change in the dimensions of the electrode is reflected directly or indirectly on the feature. This paper presents a novel modeling and analysis approach of the tool wear in micro-EDM using a systematic statistical method exemplifying the influences of capacitance, feed rate and voltage on the tool wear ratio. The association between tool wear ratio and the input factors is comprehended by using main effect plots, interaction effects and regression analysis. A maximum variation of four-fold in the tool wear ratio have been observed which indicated that the tool wear ratio varies significantly over the trials. As the capacitance increases from 1 to 10 nF, the increase in tool wear ratio is by 33%. An increase in voltage as well as capacitance would lead to an increase in the number of charged particles, the number of collisions among them, which further enhances the transfer of the proportion of heat energy to the tool surface. Furthermore, to model the tool wear phenomenon, a egression relationship between tool wear ratio and the process inputs has been developed.
The study presents a durability analysis of dies used in the first operation of producing a valve-type forging from high nickel steel assigned to be applied in motor truck engines. The analyzed process of producing exhaust valves is realized in the forward extrusion technology and next through forging in closed dies. It is difficult to master, mainly due to the increased adhesion of the charge material (high nickel steel) to the tool’s substrate. The mean durability of tools made of tool steel W360, subjected to thermal treatment and nitriding, equals about 1000 forgings. In order to perform a thorough analysis, complex investigations were carried out, which included: a macroscopic analysis combined with laser scanning, numerical modelling by FEM, microstructural tests on a scanning electron microscopy and light microscopy (metallographic), as well as hardness tests. The preliminary results showed the presence of traces of abrasive wear, fatigue cracks as well as traces of adhesive wear and plastic deformation on the surface of the dies. Also, the effect of the forging material being stuck to the tool surface was observed, caused by the excessive friction in the forging’s contact with the tool and the presence of intermetallic phases in the nickel-chromium steel. The obtained results demonstrated numerous tool cracks, excessive friction, especially in the area of sectional reduction, as well as sticking of the forging material, which, with insufficient control of the tribological conditions, may be the cause of premature wear of the dies.
Tool Like Receptors (TLR) are transmembrane proteins that play an important role in immune reactions associated with the recognition of pathogenic factors that cause infection. However, chronic infl ammatory conditions associated with the activation of these receptors create favorable conditions for the development of cancerous processes. Th e relationship between nuclear PPARγ receptors and TLR receptors is also important, whose role and importance in the process of carcinogenesis is the subject of various studies.