Search results

Filters

  • Journals
  • Authors
  • Contributor
  • Keywords
  • Date
  • Type

Search results

Number of results: 175
items per page: 25 50 75
Sort by:

Abstract

Hallmark professionalism in probabilistic analysis is to quantify the uncertainties involved in construction materials subject to intrinsic randomness in its physical and mechanical properties and is now gaining popularity in civil engineering arena. As well, knowledge of behaviour of materials is continuously evolving and its statistical descriptors are also changing when more and more data collected or even data updated and hence reliability analysis has to be carried out with the updated data as a continuous process. As per the committee report ACI 544.2R, it is found that there is no attempt made for probabilistic relation between cube compressive strength and cylinder compressive strength for fiber reinforced concrete. In consequence of this report, a robust relation between cube and cylinder of experimentally conducted compressive strength was established by Monte-Carlo simulation technique for different types of fibrous concrete like steel, alkali resistant glass and polyester fibrous concrete before and after thermoshock considering various uncertainties. Nevertheless simulated probabilistic modals, characteristic modals, optimized factor of safety and allowable designed cylinder compressive strength have been developed from the drawn probability of failure graph, which exhibits robust performance in realistic Civil Engineering materials and structures.
Go to article

Abstract

We discuss waste, fuels, and air quality with Prof. Czesława Rosik-Dulewska from the PAS Institute of Environmental Engineering and the Department of Land Protection at the University of Opole.
Go to article

Abstract

Air quality and climate change, as two crucial environmental emergencies confronting our societies, are still generally viewed as separate problems requiring different research and policy frameworks. However, they should rightfully be viewed as two sides of the same coin. What we truly need to seek, therefore, are “win-win” solutions.
Go to article

Abstract

The problem of poor quality of traffic accident data assembled in national databases has been addressed in European project InDeV. Vulnerable road users (pedestrians, cyclists, motorcyclists and moped riders) are especially affected by underreporting of accidents and misreporting of injury severity. Analyses of data from the European CARE database shows differences between countries in accident number trends as well as in fatality and injury rates which are difficult to explain. A survey of InDeV project partners from 7 EU countries helped to identify differences in their countries in accident and injury definitions as well as in reporting and data checking procedures. Measures to improve the quality of accident data are proposed such as including pedestrian falls in accident statistics, precisely defining minimum injury and combining police accident records with hospital data.
Go to article

Abstract

Identity in a housing environment is one of its resources as valuable as its water, air, flora and fauna. The readability of identity should be the basic factor of the quality of architecture and landscape architecture recognizable as a significant resource. It is an important factor which influences the living standard of people who inhabit a given space from a psychological, social and cultural point of view. In order to care for identity, we must be aware of it, of its role and significance in our lives and residence in a given environment. Man must understand the phenomenon of the meaning of life with respect to its space as his place in the world. When we understand the all-embracing rhythm and taste of the life of a place of residence, we will comprehend life itself.
Go to article

Abstract

O b j e c t i v e s: The aim of study was to investigate the association between anxiety, depression, stress and determinants of quality of life among Iranian students. M e t h o d s: The questionnaires were completed by 275 students. The random sampling was conducted in two phases, the stratified sampling which some classes were selected among different classes of faculty of health and at the second phase, in each class the number of students who had the requirements to enter in the study were selected randomly. the logistic regression to find out the association between demographic characteristics with the quality of life was run and according to the normality status of the distribution of data the parametric or non-parametric tests were used. R e s u l t s: In the univariable model, the students that were living in their own homes had the odds of 2.18 times more than the others to have a higher quality of life level (95% CI: 1.07–4.45). In the multi variable model the anxiety and stress were significantly related to the quality of life and for increasing each 1 unit in the amount of anxiety and stress the odds of a better quality of life decreases 0.19 and 0.03 respectively. Even after adjusting for other covariates – in the multivariable model – both anxiety and stress were associated with the quality of life. C o n c l u s i o n: It is useful for the universities to understand different aspects of the students’ lives which are under the influence of stress, anxiety and depression, and also determining the resources from which they are originated.
Go to article

Abstract

In individual dogs, despite good quality of raw sperm, some parameters are significantly changed after thawing, which cannot be predicted. We therefore investigated whether motility parameters objectively obtained by CASA, membrane integrity (MI), cell morphology or a combination are suitable to improve the prediction of bad post-thaw quality. For this purpose 250 sperm analysis protocols from 141 healthy stud dogs, all patients introduced for sperm cryopreservation, were evaluated and a Classification and Regression Tree (CART) -analysis performed. The sperm was routinely collected, analysed, and frozen by using a modified Uppsala system. After thawing, data were routinely examined by using CASA, fluorescent microscopy for membrane integrity (MI) and Hancock’s fixation for evaluation of cell morphology. Samples were sorted by post-thaw progressive motility (P) in good (P > / = 50%, n=135) and bad freezers (P<50%, n=115). Among bad freezers, 73.9% showed in addition post-thaw total morphological abberations of >40% and/or MI <50%. Bad freezers were significantly older than good freezers (p<0.05). Progressive motility (P), velocity curvilinear (VCL), mean coefficient (STR), and linear coefficient (LIN) were potential predictors for post-thaw sperm quality since specifity was best (85.8%) and sensitivity (75.4 %) and accuracy (80.4 %) good. For these objectively measured raw sperm parameters, cut-off values were calculated allowing prediction of bad post-thaw results with high accuracy: P = 83.1 % VCL = 161.3 µm/sec, STR = 0.83 %, and LIN = 0.48 %. Raw sperm samples with values below these cut off values will have below average post-thaw quality with a probability of 85.8%. We conclude that VCL, P, STR and LIN are potential predictors of the outcome of sperm cryopreservation, when combined.
Go to article

Abstract

In this paper, the applications of the multivariate data analysis and optimization on vibration signals from compressors have been tested on the assembly line to identify nonconforming products. The multivariate analysis has wide applicability in the optimization of weather forecasting, agricultural experiments, or, as in this case study, in quality control. The techniques of discriminant analysis and linear program were used to solve the problem. The acceleration and velocity signals used in this work were measured in twenty-five rotating compressors, of which eleven were classified as good baseline compressors and fourteen with manufacturing defects by the specialists in the final acoustic test of the production line. The results obtained with the discriminant analysis separated the conforming and nonconforming groups with a significance level of 0.01, which validated the proposed methodology.
Go to article

Abstract

The aim of the study was to investigate the effect of soybean lecithin as a substitute for egg yolk in milk and tris based extenders in ram semen cryopreservation. Twenty ejaculates were col- lected from four healthy, mature Wrzosówka rams (2-3 years of age). Each ejaculate was divided into four equal aliquots and diluted with four different extenders: 1) milk extender containing 5% egg yolk, 2) milk extender containing 1.5% soybean lecithin, 3) tris extender containing 20% egg yolk, 4) tris extender containing 1.5% soybean lecithin. Extended semen was loaded into 0.25 ml French straws, cooled and frozen in liquid nitrogen vapor. Total motility, curvilinear velocity, plasma membrane integrity and fertilizing ability of sperm were assessed after thawing. Total mo- tility was lower (p<0.05) in tris-soybean lecithin extender when compared to other extenders. Curvilinear velocity was higher (p<0.05) for spermatozoa cryopreserved in milk-soybean lecithin extender compared to other extenders tested. For the percentage of live sperm no significant difference was observed between extenders. The lambing rate were higher (not statistically signifi- cant) in ewes inseminated with semen doses frozen in milk-soybean lecithin extender (42.9%) than in the tris-egg yolk extender (16.7%). In conclusion, replacing the egg yolk with soybean lecithin was effective in milk but not in tris extender.
Go to article

Abstract

The paper investigates the interdependence between the perceptual identification of the vocalic quality of six isolated Polish vowels traditionally defined by the spectral envelope and the fundamental frequency F0. The stimuli used in the listening experiments were natural female and male voices, which were modified by changing the F0 values in the ±1 octave range. The results were then compared with the outcome of the experiments on fully synthetic voices. Despite the differences in the generation of the investigated stimuli and their technical quality, consistent results were obtained. They confirmed the findings that in the perceptual identification of vowels of key importance is not only the position of the formants on the F1 × F2 plane but also their relationship to F0, the connection between the formants and the harmonics and other factors. The paper presents, in quantitative terms, all possible kinds of perceptual shifts of Polish vowels from one phonetic category to another in the function of voice pitch. An additional perceptual experiment was also conducted to check a broader range of F0 changes and their impact on the identification of vowels in CVC (consonant, vowel, consonant) structures. A mismatch between the formants and the glottal tone value can lead to a change in phonetic category.
Go to article

Abstract

The increment in the number of automobiles and the densification of the city has increased noise pollution rates. In addition, the lack of regulation in Chile regarding the acoustic insulation of façades is a problem of a growing concern. The main objective of the present study was to obtain a model of the Sound Insulation of housing, façades, stratified in Santiago, Chile, based on constructive variables. It is expected to serve as a basis for one future regulation for acoustic façades of houses. In the present study, tests based on the international ISO 140-5 standard were carried out in situ. An estimation model of the Standardized Level Difference Dls,2m,nT,w + C, was obtained based on the opening/façade proportion, and the type of glass used for the windows.
Go to article

Abstract

When the distribution of water quality samples is roughly balanced, the Bayesian criterion model of water-inrush source generally can obtain relatively accurate results of water-inrush source identification. However, it is often difficult to achieve desired classification results when training samples are imbalanced. Sample imbalance is common in the source identification of mine water-inrush. Therefore, we propose a three-dimensional (3D) spatial resampling method based on rare water quality samples, which achieves the balance of water quality samples. Based on the virtual water sample points distributed by the 3D grid, the method uses the 3D Inverse Distance Weighting (IDW) method to interpolate the groundwater ion concentration of the virtual water samples to achieve oversampling of rare water samples. Case study in Gubei Coal Mine shows that the method improves overall discriminant accuracy of the Bayesian criterion model by 5.26%, from 85.26% to 90.69%. In particular, the discriminative precision of the rare class is improved from 0% to 83.33%, which indicates that the method can improve the discriminant accuracy of the rare class to large extent. In addition, this method increases the Kappa coefficient of the model by 19.92%, from 52.26% to 72.19%, increasing the degree of consistency from “general” to “significant”. Our research is of significance to enriching and improving the theory of prevention and treatment of mine water damage.
Go to article

Abstract

Low emission has a significant impact on air quality in Poland. Low sources are found which lead to high concentrations of pollutants in the area inhabited by humans. The effects of low emissions on health and life in the polluted areas (Małopolska, Silesia) are conducive to radical decisions regarding the quality of solid fuels and their combustion facilities. At present, local anti-smuggling laws have been introduced in the two provinces banning the burning of the most emitting fuels such as mules, flotoconcentrates and lignite. Regional EU-funded programs for the use of renewable energy sources (RES) and energy efficiency improvement will transition to the implementation phase of the approved projects as of 2017. This is expected to significantly reduce energy consumption for heating buildings and replacing old boilers and automatic furnaces with low-emission heating devices. In the case of households, proving that the residential building has adequate energy efficiency characteristics is necessary in order to receive co-financing for replacing an old solid fuel boiler with a new low-emission boiler,. The paper will present the current situation on the regulation of the fuel market in the household and small–scale consumer sector and the proposal for changes to the law on monitoring and control of solid fuel quality. Another important issue will be significant changes in heating up to 500 kW, proposed by the Ministry of Development in October 2016. The proposed regulation precedes the implementation of the Ecodesign Directive, which will come into effect as of 2022 for room heaters and heating furnaces up to 500 kW for solid fuels. All these actions will help reduce low emissions and improve energy efficiency.
Go to article

Abstract

Choral singers are among intensive voice users whose excessive vocal effort puts them at risk of developing voice disorders. The aim of the work was to assess voice quality for choral singers in the choir at the Polish-Japanese Academy of Information Technology. This evaluation was carried out using the acoustic parameters from the COVAREP (A Collaborative Voice Analysis Repository For Speech Technologies) repository. A prototype of a mobile application was also prepared to allow the calculation of these parameters. The study group comprised 6 male and 19 female choir singers. The control group consisted of healthy non-singing individuals, 50 men and 39 women. Auditory perceptual assessment (using the RBH scale) as well as acoustic analysis were used to test the voice quality of all the participants. The voice quality of the female choir singers proved to be normal in comparison with the control group. The male choir singers were found to have tense voice in comparison with the controls. The parameters which proved most effective for voice evaluation were Peak Slope and Normalized Amplitude Quotient.
Go to article

Abstract

In the era of transition to a low-carbon economy, optimal use of the developmental resources within urban regions expresses the need to limit suburbanization and increase the energy efficiency. Solutions are sought as an alternative for the suburban housing estates embodying the image high-quality life in the American Dream style. Aspects of the urban innovation, serving the public sector as a tool for improvement of the quality in residential environment, are considered in the article. Selected examples (mainly German) are described with reference to 1) the changes in the standards of housing development, 2) large-scale renewal programs for residential areas, 3) development and dissemination of urban design (the technique). The interaction between scientific research and the implementation sphere, remaining in the hands of local governments, is important here. Synergy, at a local level, is of key importance in at least four aspects in urban development: 1) solving complex, atypical problems, 2) the public sector being a strong (independent) partner, 3) adaptation of foreign concepts, from other planning systems/cultures and morphologically different urban structures, 4) strengthening the position in relations with the EU.
Go to article

Abstract

The main objective of the article is an attempt to indicate factors which determine the image of a city as a good place to live as well as to reveal the ways in which they affect the citizens’ quality of life. In order to do so, the author selected the city of Gdynia which is perceived as the best city to live in by its citizens. Among the most important factors determining the quality of life in general there are: the scale of a city, local identity, public spaces, symbolic places, housing environment, perception of a place, personal satisfaction of a place where a particular person lives, urban policies as well as presence and activeness of local leaders. The article presents the results of a social study carried out by the author herself during two periods of time – in 2004 and 2014 as well as the results of the Social Diagnosis 2015.
Go to article

Abstract

The article highlights the issues of the quality of the newly developed residential areas in Stockholm, in the times of one of the most development intense times in the history of the city. The city of Stockholm has a population of ca. one million residents today and is one of the fastest growing cities in Europe. The high increase in population numbers, high birth rate and strong economy have been the main factors contributing to the rapid city growth. The urgent need for new houses has been addressed by Stockholm’s politicians with an ambitious housing programme. The housing shortage together with the city´s booming economy and actively applied planning policies have created challenges for the decision makers and for the city planners. Most of Stockholm´s new residential areas are being planned outside the city centre which requires a revised approach to the character of the planned spaces and to their density. However, the issues of the quality of the currently planned and built areas are being raised more and more often. Not only the architectural quality has been discussed, but also the scale, structure typologies, the quality of the functional and spatial programmes and that of public spaces. A planning model that has been applied in Stockholm for several years is based on a close co-operation between the city´s planning administration bodies and private investors. A critical element of this kind of a planning model is a strong vision for the city´s future development. The city’s planning administration bodies assure an applicable guidance throughout the planning process. Analysis and conclusions presented in the article are based on practice at planning and administration bodies in Stockholm and in the region of Stockholm in the years 2005-2018.
Go to article

Abstract

The article concerns problems with shaping contemporary housing estates. By analyzing housing structures designed in recent years, the aim was to demonstrate the importance of creating the continuity of public spaces in order to achieve places seen as attractive and presenting features of high quality urban space. Essential for the research is the question about the conditions which should be fulfi lled when creating the ideal residential place which then leads to a series of answers. These included indicating a good location with functional and aesthetic urban/architectural solutions. Environmental issues are important as well. Regardless of whether it is a multi-family dwelling or a single family house, a good neighborhood and its location in a well-connected place with necessary basic services within walking range are important. It is also signifi cant how the public space was shaped and whether a natural network was created. Due to factors such as the specifi city of the structure’s location in the city and diff erent surfaces of designed estates, as well as the variety of residential buildings being constructed, it is often diffi cult to assess them unambiguously. Importantly, this assessment also includes social and economic aspects as well as technical issues. However, by using multi-directional research it can be noted that the forms of public spaces within housing complexes play an important role in the creation of high-quality structures, perceived as attractive not only by the residents.
Go to article

Abstract

Wood pellets, commonly referred to as biomass fuel, are increasingly used in heating and district heating in the European Union countries, including Poland. Their use in class 5 and/or Ecodesign boilers enables an individual consumer to use energy from renewable sources, reduce the environmental burden by reducing the emission of harmful compounds, and provides a sense of comfort by automating the boiler system. The article presents the current situation in the global wood pellet market, describes the basic quality standards applicable to this fuel during production, and indicates the difficulties in the implementation of programs co-financing the replacement of obsolete coal-fired boilers with automatic class 5 biomass-fired boilers. The research presented in this article is focused on the presence of contaminants in the DIN Plus, EN Plus, and A1 pellets, as well as in non-certified pellets. The analysis has shown that the use of wood pellets containing prohibited substances negatively affects boiler operation and contributes to the formation of slag and the emission of harmful compounds, making the discussed fuel non-ecological.
Go to article

Abstract

Varistors are commonly used elements which protect power supply networks against high-voltage surges or lightning. Therefore, quality and endurance of these elements is important to avoid losses when an expensive laboratory equipment would not be protected from random overvoltages. Additionally, excessive leakage currents generate serious costs due to high energy consumption. The paper presents shortly properties of varistors that comprized different ZnO grain types and can have various quality which changes continuously during exploitation (due to exposition to overheating and overvoltage pulses). Therefore, it is important to monitor varistors during their ageing (causing changes within their microstructures). A few methods of varistor property diagnosis were considered and compared with the methods currently applied in laboratory or industry applications. A new measurement (diagnostic) system that can monitor varistors during ageing and can be widely applied in power networks is presented. The proposed system fulfills requirements of the industrial customers which demand various methods for power line protection. The proposed system can be simply developed into a more advanced wireless diagnostic system of long power supply lines.
Go to article

Abstract

The analysis of available literature indicates that tests of products sound quality, which would not involve participation of groups of listeners supposed to evaluate the sounds emitted by these products, are neither carried out in Poland, nor in the world. That results in the fact that the products sound quality is determined on the basis of psychoacoustic information and comprises both objective and subjective factors of sound perception. With reference to those factors and to different life cycles of the machine, an original definition of the “sound quality of the machine” has been developed and presented in this article. The global index of the acoustic quality of the machine, accounting for the relations between the noise level at the workstation and the selected parameters characterising both the machine's sound activity and the working environment, was adopted as the measure of the sound quality of the machine. The experiments that followed confirmed the appropriateness of the assessment made with the use of the global index of acoustic quality.
Go to article

Abstract

The paper shows a study on the relationship between noise measures and sound quality (SQ) features that are related to annoyance caused by the traffic noise. First, a methodology to perform analyses related to the traffic noise annoyance is described including references to parameters of the assessment of road noise sources. Next, the measurement setup, location and results are presented along with the derived sound quality features. Then, statistical analyses are performed to compare the measurement results and sound quality features. The included conclusions are focused on showing that the obtained loudness values, regardless of the used system, are similar in a statistical sense. Contrarily, sharpness, roughness and fluctuation strength values differ for the tools employed.
Go to article

Abstract

The surfacing technologies are used for constitution of protection layer against wear and is destined for obtaining coating with high hardness. Among many weldings methods currently used to obtain the hard surface layer one of the most effective way of hardfacing is using flux cored arc welding. This additional material gives more possibilities to make expected hard surface layer. Chemical composition, property and economic factors obtained in flux cored wire are much richer in comparison to these obtained with other additional materials. This is the reason why flux cored wires give possibilities of application this kind of material for improving surface in different sectors of industry. In the present paper the imperfection in the layers was used for hardfacing process in different situations to show the possible application in the surface layer. The work presents studies of imperfection of the welds, contains the picture of microstructures, macrostructures and shows the results of checking by visual and penetrant testing methods.
Go to article

This page uses 'cookies'. Learn more