Great ablation of the Werenskiold Glacier created the need of recording the changes particularly superficial ones, after melting of its icingsGround stereophotogrammetric photos done during the Polar Expedition of the Polish Academy of Sciences in 1983 enabled to prepare a map in the scale of 1:10,000 covering by its two sheets the whole glacier, a system of open crevasses inclusive. The map presents the actual state of the glacier and enables a comparison with earlier photogrammetric measurements carried out several times since 1957.
Mapping and analysis of air photos enabled preparation of a photogeological map of the Hansbreen-Sofiekammen region in a scale of 1 : 10,000. Glacial, slope and marine landforms and sediments were distinguished. Supplied with thermoluminescence and radiocarbon data, a morphogenetic evolution of the area could be presented. Four Pleistocene and Holocene glacier advances were distinguished. Seven raised marine beaches result from the Pleistocene and the Holocene uplift of the land.
Bunger Oasis (66° 15'S 100° 45'E), which lies in the deep interior of the Antarctic Continent, was the destination of the Polish Polar Expedition in 1978/1979. The area of Oasis which is free of ice, with a surface area of 1000 km2, its own hydrographic network and diversified relief of the terrain, has over the recent years been populated by live organisms, birds (cheek-bone and snow fulmar) and Wedell seal. In valleys and depressions of the terrain, traces of soil, mosses and lichens appear. The relief of the terrain of Oasis is undergoing continuous intensive change as a result of the natural effects of the Antarctic climate.
Field mapping and analysis of air photos enabled to prepare a photogeological map of Treskelen-Hyrnefjellet-Kruseryggen area in scale of 1:10,000. Slope, glacial and nival landforms and sediments, and ten raised marine beaches were distinguished. Morphogenetic evolution of the area is also presented, with discussion of probable glacier advances and land uplift during the Late Pleistocene and the Holocene.
Landscape is an object of perception, while its image is the sum of ideas on this object. Both terms used in the title of the paper have fairly strong impact on each other. In order to manage the city’s image well, it is necessary to take care of the landscape in all its areas especially in the “forgotten” and degraded ones. The aim of the author was to identify elements of landscape exposure along railway lines – areas with low aesthetic value in many cities around the world. The research area includes railway lines, in Cracow and Wrocław. The method adopted for the implementation of the study is the analysis of mental maps made in 2018 during field workshops. The paper is ended by conclusions on the landscape impact on the image of the city.
Works connected with execution of geodesic and photogrammetric surveys and with setting up maps in the scale of 1:5000 of environs of the Polish Polar Station on the Isbjörnhamna Bay and in the scale of 1:500 of the area covered with buildings of the Station are discussed.
Bluetooth beacons are becoming increasingly popular for various applications such as marketing or indoor navigation. However, designing a proper beacon installation requires knowledge of the possible sources of interference in the target environment. While theoretically beacon signal strength should decay linearly with log distance, on-site measurements usually reveal that noise from objects such as Wi-Fi networks operating in the vicinity significantly alters the expected signal range. The paper presents a novel mobile Geographic Information System for measurement, mapping and local as well as online storage of Bluetooth beacon signal strength in semireal time. For the purpose of on-site geovisual analysis of the signal, the application integrates a dedicated interpolation algorithm optimized for low-power devices. The paper discusses the performance and quality of the mapping algorithms in several different test environments.
The grid method is the most widely used technique for measurement-based noise assessment, and indeed is part of the ISO 1996-2 standard. Nevertheless it has certain disadvantages. The present work is an analysis of the grid method for evaluating noise, firstly in the city of Cáceres and, secondly in two other smaller towns. Using as reference a 200 metre grid study, a study was made of the effect of varying the size and form of the grid on the city’s overall noise value, the percentage of data found to lie above some reference thresholds, and the noise value assigned to a certain zone of the city. The ISO 1996 recommendations of the necessity of new sampling points and the method’s predictive capacity for these new measurements were also analyzed.
The identification of macroalgal beds is a crucial component for the description of fjord ecosystems. Direct, biological sampling is still the most popular investigation technique but acoustic methods are becoming increasingly recognized as a very efficient tool for the assessment of benthic communities. In 2007 we carried out the first acoustic survey of the littoral areas in Kongsfjorden. A 2.68 km2 area comprised within a 12.40 km2 euphotic zone was mapped along the fjord's coast using single- and multi-beam echosounders. The singlebeam echosounder (SBES) proved to be a very efficient and reliable tool for macroalgae detection in Arctic conditions. The multibeam echosounder (MBES) was very useful in extending the SBES survey range, even though it's ability in discriminating benthic communities was limited. The final result of our investigation is a map of the macroalgae distribution around the fjord, showing 39% macroalgae coverage (1.09 km2) of investigated area between isobaths -0.70 m and -30 m. Zonation analysis showed that most of the studied macroalgae areas occur up to 15 m depth (93%). These results were confirmed by biological sampling and observation in key areas. The potential of acoustic imaging of macrophytes, and a proposed methodology for the processing of acoustic data, are presented in this paper along with preliminary studies on the acoustic reflectivity of macroalgae, also highlighting differences among species. These results can be applied to future monitoring of the evolution of kelp beds in different areas of the Arctic, and in the rest of the world.
Geological investigations of the 4th Polish Geodynamic Expedition to West Antarctica, summer 1990/91, covered the following topics: volcanological studies and mapping at Deception Island; stratigraphic, palaeonotological and sedimentological studies, and mapping of Tertiary glacial and glacio-marine strata on King George Island; sedimentological and mesostructural studies, and mapping at Hurd Peninsula, Livingston Island; and palaeontological sampling of Jurassic (Mount Flora Formation) and Trinity Peninsula Group deposits at Hope Bay, Trinity Peninsula.
The present paper contains a list of 104 taxa of lichens and lichenicolous fungi, found in the Cape Lions Rump, Site of Special Scientific Interest No. 34 (King George Island, Antarctica), with their distribution and ecological analysis. A provisional vegetation map of the area is also provided. During the field survey the data were collected using the cartogram method in a grid of squares 250 x 250 m. The current abundance and spatial distribution of lichen species provides baseline data for long-term monitoring biological changes.
The paper presents empirical methodology of reducing various kinds of observations in geodetic network. A special case of reducing the observation concerns cartographic mapping. For numerical illustration and comparison of methods an application of the conformal Gauss-Krüger mapping was used. Empirical methods are an alternative to the classic differential and multi- stages methods. Numerical benefits concern in particular very long geodesics, created for example by GNSS vectors. In conventional methods the numerical errors of reduction values are significantly dependent on the length of the geodesic. The proposed empirical methods do not have this unfavorable characteristics. Reduction value is determined as a difference (or especially scaled difference) of the corresponding measures of geometric elements (distances, angles), wherein these measures are approximated independently in two spaces based on the known and corresponding approximate coordinates of the network points. Since in the iterative process of the network adjustment, coordinates of the points are systematically improved, approximated reductions also converge to certain optimal values.
This article analyzes the technology of creating and updating a digital topographic map using the method of mapping (generalization) on an updated map with a scale of 1 : 25;000 based on the source cartographic material. The main issue in the creation of digital maps is the study of map production accuracy and error analysis arising from the process of map production. When determining the quality of a digital map, the completeness and accuracy of object and terrain mapping are evaluated. The correctness of object identification, the logical consistency of the structure, the and representation of objects are assessed. The main and the most effective method, allowing to take into account displacement errors for the relief during image processing, is orthotransformation, but the fragment used to update the digital topographic map needs additional verification of its compliance with the scale requirements of the map. Instrumental survey will help to clearly identify areas of space image closer to nadir points and to reject poor quality material. The software used for building geodetic control network should provide stable results of accuracy regardless on the scale of mapping, the physical and geographical conditions of the work area or the conditions of aerial photography.
This paper studies the assessment of sensitivity to land degradation of Deliblato sands (the northern part of Serbia), as a special nature reserve. Sandy soils of Deliblato sands are highly sensitive to degradation (given their fragility), while the system of land use is regulated according to the law, consisting of three zones under protection. Based on the MEDALUS approach and the characteristics of the study area, four main factors were considered for evaluation: soil, climate, vegetation and management. Several indicators affecting the quality of each factor were identified. Each indicator was quantified according to its quality and given a weighting of between 1.0 and 2.0. ArcGIS 9 was utilized to analyze and prepare the layers of quality maps, using the geometric mean to integrate the individual indicator map. In turn, the geometric mean of all four quality indices was used to generate sensitivity of land degradation status map. Results showed that 56.26% of the area is classified as critical; 43.18% as fragile; 0.55% as potentially affected and 0.01% as not affected by degradation. The values of vegetation quality index, expressed as coverage, diversity of vegetation functions and management policy during the protection regime are clearly represented through correlation coefficient (0.87 and 0.47).
Image processing techniques (band rationing, color composite, Principal Component Analyses) are widely used by many researchers to describe various mines and minerals. The primary aim of this study is to use remote sensing data to identify iron deposits and gossans located in Kaman, Kırşehir region in the central part of Anatolia, Turkey. Capability of image processing techniques is proved to be highly useful to detect iron and gossan zones. Landsat ETM+ was used to create remote sensing images with the purpose of enhancing iron and gossan detection by applying ArcMap image processing techniques. The methods used for mapping iron and gossan area are 3/1 band rationing, 3/5 : 1/3 : 5/7 color composite, third PC and PC4 : PC3 : PC2 as RG B which obtained result from Standard Principal Component Analysis and third PC which obtained result from Developed Selected Principal Component Analyses (Crosta Technique), respectively. Iron-rich or gossan zones were mapped through classification technique applied to obtained images. Iron and gossan content maps were designed as final products. These data were confirmed by field observations. It was observed that iron rich and gossan zones could be detected through remote sensing techniques to a great extent. This study shows that remote sensing techniques offer significant advantages to detect iron rich and gossan zones. It is necessary to confirm the iron deposites and gossan zones that have been detected for the time being through field observations.
Spare parts are one of the important pillars in the after-sales service of automotive business. Customers will satisfied and comfortable if the availability of spare parts is guaranteed. Spare Part Center is one of function to support unit sales and as well as profit-oriented, so the accuracy and speed of spare part acceptance by the customer is an important key to winning the competition. Order Picking is one of the supply chain processes that play a role in warehouse operations to meet customer needs. Order Picking is the most expensive activity in warehousing and can reach 55% of the total cost of warehousing operations, so it is considered a top priority in increasing productivity, even reaching 65% of total warehouse operating costs. The purpose of this research is to increase productivity in the process of picking order through reduction of processing time. Increased productivity is done by improving the working method of the picking process. From the result the comparing, the method by zone requires less total picking time (193.712 seconds) than by routing (249.559 seconds) decreased 55.85 second time, in other words, an increase of 22.38%. With the Visual Stream Mapping (VSM) in this research can reduce to travel time, it means that the total distance traveled is small than the current method. The impact from VSM approach will eliminate time for preparation of 1.960 seconds, and take empty trolley of 200 seconds. In this case some of traveling non-value
The situation when groundwater considerably rises above the “normal” level, water intake, lowering of groundwater levels and other relevant practical tasks require the drainage facilities. The most effective techniques of numerical studies of the corresponding boundary problems at present time are methods of dealing with inverse boundary value problems (conformal and quasi-conformal mappings). As basis of this research we used the case of combining the fictitious domain methods with quasi-conformal mappings of the solution of nonlinear boundary value problems for the calculation of filtra-tion regimes in environments with free boundary areas (depression curves) and zones of “mountainous” areas. This paper reviews the stationary issue of flat-vertical stationary non-pressure liquid filtration to horizontal symmetric drainage. In the paper a practical methodology for solving boundary value problems on conformal mappings is suggested for the calculation of the filtration process in the horizontal symmetrical drainage. The idea of block iterative methods was used during the creation of the corresponding algorithm which is based on the alternating “freeze” of the anticipated conformance parameter, the internal and boundary connections of the curvilinear area. The results of the conducted numerical calculations confirmed the effectiveness of the suggested problem formulations and algorithms of their numerical solution and the possibility of their use in the modelling of nonlinear filtration processesoccurring in horizontal drainage systems, as well as in the design of drainage facilities and optimizing other hydrosystems. Therefore these results are of great importance.
In the paper the author has described the visualization methods in acoustic flow fields and show how these methods may assist scientists to gain understanding of complex acoustic energy flow in real-life field. A graphical method will be presented to determine the real acoustic wave distribution in the flow field. Visualization of research results, which is unavailable by conventional acoustics metrology, may be shown in the form of intensity streamlines in space, as a shape of floating acoustic wave and intensity isosurface in three-dimensional space. In traditional acoustic metrology, the analysis of acoustic fields concerns only the distribution of pressure levels (scalar variable), however in a real acoustic field both the scalar (acoustic pressure) and vector (the acoustic particle velocity) effects are closely related. Only when the acoustic field is described by both the potential and kinetic energies, we may understand the mechanisms of propagation, diffraction and scattering of acoustic waves on obstacles, as a form of energy image. This attribute of intensity method can also validate the results of CFD/CAA numerical modeling which is very important in any industry acoustic investigations.
The relatively limited application of lean in the food process industries has been attributed to the unique characteristics of the food sector i.e. short shelf-life, heterogeneous raw materials, and seasonality. Moreover, barriers such as large and inflexible machinery, long setup time, and resource complexity, has limited the implementation and impact of lean practices in process industries in general. Contrary to the expectations in the literature, we bring in this paper a successful experience of lean implementation in a company of the food-processing sector. By focusing on two lean tools (VSM and SMED), the company reduced changeover time by 34%, and increased the production capacity of the main production line by 11%. This improvement enabled the company to avoid the use of temporary workers by extending the worktime of its workforce during peak months. Moreover, the reduction of setup time avoided the use of large lot size in production, which, in turn, reduced the total cycle time of production and the incidence of quality problems.
Vegetation was described in various spatial scales in the area of 37.8 km 2 including distinguishing vegetation units, vegetation mapping, recording phytosociological relevés (53), and completing species lists of vascular plants (86), mosses (124) and lichens (40). Phytosociological relevés were elaborated using ordination methods DCA and CCA. The relevés formed clusters corresponding well to a priori assigned vegetation units. Slope and stoniness significantly influenced the vegetation pattern. Despite the high latitude (nearly 80 ° N), the vegetation is rather rich in species. Non−native species do not expand. The moss Bryum dichotomum is reported for the first time from Svalbard archipelago.
The field of academic research on corporate sustainability management has gained significant sophistication since the economic growth has been associated with innovation. In this paper, we are to show our research project that aims to build an artificial intelligence-based neurofuzzy inference system to be able to approximate company’s innovation performance, thus the sustainability innovation potential. For this we used an empirical sample of Hungarian processing industry’s large companies and built an adaptive neuro fuzzy inference system.
The Gaussian mixture model (GMM) method is popular and efficient for voice conversion (VC), but it is often subject to overfitting. In this paper, the principal component regression (PCR) method is adopted for the spectral mapping between source speech and target speech, and the numbers of principal components are adjusted properly to prevent the overfitting. Then, in order to better model the nonlinear relationships between the source speech and target speech, the kernel principal component regression (KPCR) method is also proposed. Moreover, a KPCR combined with GMM method is further proposed to improve the accuracy of conversion. In addition, the discontinuity and oversmoothing problems of the traditional GMM method are also addressed. On the one hand, in order to solve the discontinuity problem, the adaptive median filter is adopted to smooth the posterior probabilities. On the other hand, the two mixture components with higher posterior probabilities for each frame are chosen for VC to reduce the oversmoothing problem. Finally, the objective and subjective experiments are carried out, and the results demonstrate that the proposed approach shows greatly better performance than the GMM method. In the objective tests, the proposed method shows lower cepstral distances and higher identification rates than the GMM method. While in the subjective tests, the proposed method obtains higher scores of preference and perceptual quality.
Scientific output analysis in Poland takes place in many ways: by use both central and local databases. The article discusses the contents and bibliometric functions of the most important bibliographic databases, i.e. “People of science”, Polish Scientific Bibliography and employeers local registration system Expertus. The authors evaluate these tools from the perspective of the ability to make comparisons of the effectivity of individual researchers as well as to stimulate the development of scientific careers. As alternative solution relative to the analytical spectrum of all external tools, the authors present own application that allows visualization of scientific achievements. According authors’ observation, the Scientific Visualiser can enrich the individual information space of the contemporary scientist. Dedicated application certainly facilitates the evaluation of the publication activity, increases an awareness of updating of the bibliographic data, helps in discovering the relationship between the research fields, inspires to broaden intelectual horizons and cooperation networks. From another side, it can also be a tool supporting administration activities, such as: employees evaluation, promotion proceedings, accreditation, experts selection, distribution of funds.
According to the Grant Map of the Ministry of Development (MoD) as of March-April 2017, there were 1716 urban regeneration (revitalization) projects implemented in Poland between 2007-2013. Data from 11 voivodeships (out of 16 regions NUTS 2 in Poland) and 977 projects was sufficient to provide a representative sample (56,9% of projects presented in the Grant Map). The main methods used in the article included observation and review of MoD statistical data and literature on the subject. As observed by the author, between 2007-2013 the definition of urban regeneration (revitalization) was only mentioned in one of the footnotes to the housing guidelines, which was a poor legal basis for the regional managing authorities. Similarly, there was no solid basis in the strategic documents (national) for that period: they did not provide any definition of revitalization. It was in the interest of the beneficiaries, as well as – partly – in the interest of those managing authorities to satisfy the local needs, especially those needs which were not considered the result of the shift to the post-industrial era, but rather as a result of numerous institutional and political events. Due to these features, the period 2007-2013 was dominated by infrastructure projects aimed at the quality of life but also efficient in terms of spending European money. It seems that there was an agreement between regional managing authorities and the benefi ciaries (potential voters) as to the way of spending the revitalization funding. This was understood differently at national level, but because institutions at this level were not involved directly in the urban regeneration (revitalization), their influence on regional units was minor. Even more so because the managing authorities were also interested in speeding up the process of spending European resources.