The aim of this paper is the methodology of measurements executed in a radio link for the realization of radiolocation services in radiocommunication networks, particularly in cellular networks. The main results of the measurements obtained in the physical layer of the universal mobile telecommunications system (UMTS) are introduced. A new method for the utilization of the multipath propagation phenomenon to improve the estimation of the distance between the mobile station (MS) and the base station (BS) is outlined. This method significantly increases the quality of location services in systems which use a radio interface with direct sequence code division multiple access (DS CDMA).
The Act of July 5, 2018 on Facilitating of Preparation and Implementation of Housing and Accompanying Investments allows such investments irrespective of the existence of a local development plan or determination of use of land in the local development plan. In other words, the abovementioned investments may be implemented on land with a completely different designation according to the local development plan, as for example the mining of minerals. The location of the investment is decided by a resolution of the municipal council. If the planned location is to be situated within the boundaries of documented mineral deposits and the so-called „mining areas”, it needs, among others, to be agreed with the appropriate geological administration authority. Not taking a position within 21 days is considered as a consent. With reference to the deposits not covered by mining licenses, the Act does not indicate the premises that should be taken into consideration while providing such consent. There is a concern that this may lead to the development of the land in a way that will cause the subsequent extraction of the mineral impossible.
Trade is one of the key factors determining sustainable city development and its surroundings. City development is a result of provision of goods and services to city inhabitants, and residents of its surrounding areas. Retail trade in Poland belongs to economy sectors in which the processes of market changes were started the earliest. Discount stores that apply the strategy of low prices in the in the process of market conquering are currently one of the most dynamically developing selling formats. These shopping facilities are located in many Polish cities, including small towns and rural areas. The aim of the article is to show the scale of investments in new discount shops in small towns and rural areas in Poland in 2012–2015. Research focused at devoted to this field is important from the point of view of choosing the location of new investments related to discount chains and of the small towns and rural areas development strategies. Identification of consequences of discount chains operations in chosen rural areas and small towns can impact the verification of the policy adopted by local authorities in relation to spatial planning and forming the functional structure of the space. It will result in more conscious (rational) decisions in terms of localizing new discounts, which will reduce the number of local conflicts related to location of such facilities.
This paper presents the comparison of filtering methods – median filtration, moving average Kalman filtration and filtration based on a distance difference to determine the most accurate arm length for circular motion, as a model of wind turbine propellers movement. The experiments have been performed with the UWB technology system containing four anchors and a tag attached to 90cm arm that was rotated with speed up to 15.5 rad/s (as a linear speed of 50km/h). The trilateration concept based on the signal latency has been described in order to determinate the position of an object on circular trajectory. The main objective is the circle plane rotation (parallel and perpendicular) with respect to the anchors plane reference system. All research tasks have been performed for various cases of motion schemes in order to get the filtration method for object in motion under best accuracy goal. Filtration methods have been applied on one of two stages of the positioning algorithm: (1) on raw data got from the single anchor-tag (before trilateration); (2) on the position obtained from four anchors and tag (after trilateration). It has been proven that the appropriate filtering allows for higher location accuracy. Moreover, location capabilities with the use of UWB technology – shows prospective use of positioning of objects without access to other positioning forms (ex. GPS) in many aspects of life such as currently developing renewable, green energy sources like wind turbines where the circular motion plays an important role, and precise positioning of propellers is a key element in monitoring the work of the whole wind turbine.
This paper concerns measurement procedures on an emotion monitoring stand designed for tracking human emotions in the Human-Computer Interaction with physiological characteristics. The paper addresses the key problem of physiological measurements being disturbed by a motion typical for human-computer interaction such as keyboard typing or mouse movements. An original experiment is described, that aimed at practical evaluation of measurement procedures performed at the emotion monitoring stand constructed at GUT. Different locations of sensors were considered and evaluated for suitability and measurement precision in the Human- Computer Interaction monitoring. Alternative locations (ear lobes and forearms) for skin conductance, blood volume pulse and temperature sensors were proposed and verified. Alternative locations proved correlation with traditional locations as well as lower sensitiveness to movements like typing or mouse moving, therefore they can make a better solution for monitoring the Human-Computer Interaction.
The noise of motor vehicles is one of the most important problems as regards to pollution on main roads. However, this unpleasant characteristic could be used to determine vehicle speed by external observers. Building on this idea, the present study investigates the capabilities of a microphone array system to identify the position and velocity of a vehicle travelling on a previously established route. Such linear microphone array has been formed by a reduced number of microphones working at medium frequencies as compared to industrial microphone arrays built for location purposes, and operates with a processing algorithm that ultimately identifies the noise source location and reduces the error in velocity estimation
Designed by the architect Louis I. Kahn, the Phillips Exeter Academy Library is renowned mostly for the quality of its inner spaces. Particularly, the image of the building's central void with its large circular openings giving an insight onto the bookshelves has almost become an archetype of the library. Following the building's design process, however, we will learn how many tangible factors participated in the actual shaping of its architecture. The uniqueness of this project relies not only on embodying the idea of the library as institution, but also on the compromises the architect took as well as on the building's adjustment to its environmental setting.
This article presents combined approach to analog electronic circuits testing by means of evolutionary methods (genetic algorithms) and using some aspects of information theory utilisation and wavelet transformation. Purpose is to find optimal excitation signal, which maximises probability of fault detection and location. This paper focuses on most difficult case where very few (usually only input and output) nodes of integrated circuit under test are available.
This paper presents an improved approach for locating and identifying faults for UHV overhead Transmission line by using GA-ANFIS. The proposed method uses one end data to identify the fault location. The ANFIS can be viewed either as a Fuzzy system, neural network or fuzzy neural network FNN. The integration with neural technology enhances fuzzy logic system on learning capabilities are proposed to analyze the UHV system under different fault conditions. The performance variation of two controllers in finding fault location is analyzed. This paper analyses various faults under different conditions in an UHV using Matlab/simulink. The proposed method is evaluated under different fault conditions such as fault inception angle, fault resistance and fault distance. Simulation results confirm that the proposed method can be used as an efficient for accurate fault location on the transmission line.
The main points of the UPoN-2018 talk and some valuable comments from the Audience are briefly summarized. The talk surveyed the major issues with the notion of zero-point thermal noise in resistors and its visibility; moreover it gave some new arguments. The new arguments support the old view of Kleen that the known measurement data “showing” zero-point Johnson noise are instrumental artifacts caused by the energy-time uncertainty principle. We pointed out that, during the spectral analysis of blackbody radiation, another uncertainty principle is relevant, that is, the location-momentum uncertainty principle that causes only the widening of spectral lines instead of the zero-point noise artifact. This is the reason why the Planck formula is correctly confirmed by the blackbody radiation experiments. Finally a conjecture about the zero-point noise spectrum of wide-band amplifiers is shown, but that is yet to be tested experimentally.