During implementation of construction projects, durations of activities are affected by various factors. Because of this, both during the planning phase of the project as well as the construction phase, managers try to estimate, or predict, the length of any delays that may occur. Such estimates allow for the ability to take appropriate action in terms of planning and management during the execution of construction works. This paper presents the use of the non-deterministic concept for describing the uncertainty of estimating works duration. The concept uses the theory of fuzzy sets. The author describes a method for fuzzy estimations of construction works duration based on the fact that uncertain data is an inherent factor in the conditions of construction projects. An example application of the method is presented. The author shows a fuzzy estimation for the duration of an activity, taking into consideration the distorting influence caused by malfunctioning construction equipment and delivery delays of construction materials.
The paper presents the results of assessment studies of the time course for technical wear in masonry buildings located in the area of mining-induced ground deformations. By using fuzzy inference system (FIS) and the “if-then” rule, corresponding language labels describing actual damage recorded in structure components were translated into scalar outputs describing the degree of damage to the building. Adopting this approach made it possible to separate damage resulting from additional effects coming from mining-induced ground deformations and the natural wear and tear of masonry structure. By using statistical analysis an exponential function for the condition of building damage and the function of natural wear and tear were developed. Both phenomena were subject to studies as a function of time regarding the technical age of building structure. The results obtained were used to develop a model for the course of technical wear of traditionally constructed buildings used within mining areas. In the course of natural wear and tear buildings located in mining areas are additionally exposed to forced ground deformations. The increase of internal forces in structure components induced by those effects results in creating an additional stress factor and damage. The hairline cracks and cracks of building structure components take place when the intensity value of mining effects becomes higher than the component stress resistance and repeated effects result in the decrease of structure rigidity. The observations of building behaviour in mining areas show that the intensity of mining activity and the multiplicity of its effect play a substantial role in the course of technical wear of buildings. The studies show that the level of damage resulting from mining effects adds up to natural wear and tear of the building and impairs the global technical condition as compared to similar buildings used outside mining areas.
The basis for a mineral deposit delimitation is a qualitative and quantitative assessment of deposit parameters, qualifying a deposit as an economically valuable object. A conventional approach to the mineral deposit recognition and a deposit detailed parameters qualification in the initial stages of development work in the KGHM were presented in the paper. The goals of such recognition were defined, which through a gradual detailed expansion, resulting from the information inflow, allows for the construction of a more complete decision-making model. The description of the deposit parameters proposed in the article in the context of fuzzy logic, enables a presentation of imprecise statements and data, which may be a complement to a traditional description. Selected non-adjustable and adjustable s-norm and t-norm operators were demonstrated. Operators effects were tested for selected ore quality parameters (copper content and deposit thickness) by constructing adequate membership functions. In a practical application, the use of chosen fuzzy logic operators is proposed for the assessment of the qualitative parameters of copper-silver ore in the exploitation blocks for one of the mines belonging to KGHM Polish Copper S.A. The considerations have been extended by including the possibility of using compensation operators.
The operational mineral deposit reconnaissance tends to evaluate its parameters to conduct safe and profitable production. Particular deposit parameters, important from the point of mineral deposit management, are estimated on the basis of observations carried out by mining geological surveys. These observations usually involve sampling, drilling, laboratory analyses and others. The use of fuzzy description to assess the parameters of the mineral deposit was proposed in the paper. In the fuzzy characteristics, an imprecise descriptive description appeared in place of a particular numerical quantity. This approach was used to description of the ore deposit features (metal content, volume, and metal yield) by assigning them specific characteristic functions, whose distributions were based on basic statistical quantities. Characteristic functions can be used to prepare operational strategies for any configuration of required deposit parameters resulting from the production management needs. For this purpose, selected logical operators of fuzzy sets were used. In the next approach to fuzzy modeling, an opportunity to characterize the deposit in a subjective approach was indicated, where the assessment of the deposit parameters is based on rough, in some way, discretionary observation and evaluation. Such model construction enabled the overall assessment of the deposit from the point of view of any parameters. Through the implementation of appropriate inference rules, adequate fuzzy control planes were obtained, which may also be useful in the context of operational mine strategy planning.
The article presents the use of the Mamdani fuzzy reasoning model to develop a proposal of a system controlling partnering relations in construction projects. The system input variables include: current assessments of particular partnering relation parameters, the weights of these parameters’ impact on time, cost, quality and safety of implementation of construction projects, as well as the importance of these project assessment criteria for its manager. For each of the partnering relation parameters, the project’s manager will receive controlrecommendations. Moreover, the parameter to be improved first will be indicated. The article contains a calculation example of the system’s operations.
Article deals with the problem of technology selection for construction project. Three criteria were proposed: cost, time and technological complexity. To solve the problem, fuzzy preference relations were used. Authors present an algorithm supporting multi-criteria decision-making process. The algorithm creates fuzzy preference relations on the basis of the fuzzy comparison: “xᵢ is better than xj”.Then, with the use of criteria weights it creates general fuzzy preference relation, finds all non-dominated (admissible) alternatives and the best one among them. The algorithm consists of 7 steps. Authors show application of the proposed algorithm – example calculations.
The basic element of a project organizing construction works is a schedule. The preparation of the data necessary to specify the timings of the construction completion as indicated in the schedule involves information that is uncertain and hard to quantify. The article presents the methods of building a schedule which includes a fuzzy amount of labour, time standards and number of workers. The proposed procedure allows determining the real deadline for project completion, taking into account variable factors affecting the duration of the individual works.
The paper presents an approach to evaluating a building throughout its whole life cycle in relation to its sustainable development. It describes basic tools and techniques of evaluating and analysing the costs in the whole life cycle of the building, such as Life Cycle Assessment, Life Cycle Management, Life Cycle Cost and Social Life Cycle Assessment. The aim of the paper is to propose a model of cost evaluation throughout the building life cycle. The model is based on the fuzzy sets theory which allows the calculations to include the risks associated with the sustainable development, with the management of the investment and with social costs. Costs incurred in the subsequent phases of the building life cycle are analysed and modelled separately by means of a membership function. However, the effect of the analysis is a global cost evaluation for the whole life cycle of the building.
The selection of a contractor is one of the most important among decisions made by the ownerof a construction. The application of the prequalification procedure enables the selection of themost competent tenderers. Various mathematical models are helpful in carrying out prequalificationprocedure. In the paper, some selected mathematical models are briefly characterized and modelbased on the theory of fuzzy sets is offered. The applied model takes into consideration theowner’s various objectives, as well as different evaluation criteria. The results of the sensitivityanalysis of the model are also presented. Part of a computer software applying an earlier presentedprequalification mathematical model is described.
The paper presents the method for multicriteria design of a synchronous generator voltage regulator. The results of the voltage regulator polyoptimisation are compromise sets for a classic controller of type PI and fuzzy logic controller of type Takagi-Sugeno-Kang. A genetic algorithm is used to solve the polyoptimisation problem.
The paper presents a retrospective study for selection of noise barrier for road traffic noise abatement. The work proposes the application of Fuzzy TOPSIS (Technique for order preference by similarity to an ideal solution) approach is selection of optimal road traffic noise barrier. The present work utilizes the fuzzy TOPSIS model proposed by Mahdavi et al. (2008) in determination of ranking order of various types of noise barriers with respect to the various criteria considered. It is suggested that application of this approach can be very helpful in selection and application of optimal noise barrier for road traffic noise abatement.
The paper presents the operation of two neuro-fuzzy systems of an adaptive type, intended for solving problems of the approximation of multi-variable functions in the domain of real numbers. Neuro-fuzzy systems being a combination of the methodology of artiﬁcial neural networks and fuzzy sets operate on the basis of a set of fuzzy rules “if-then”, generated by means of the self-organization of data grouping and the estimation of relations between fuzzy experiment results. The article includes a description of neuro-fuzzy systems by Takaga-Sugeno-Kang (TSK) and Wang-Mendel (WM), and in order to complement the problem in question, a hierarchical structural self-organizing method of teaching a fuzzy network. A multi-layer structure of the systems is a structure analogous to the structure of “classic” neural networks. In its ﬁnal part the article presents selected areas of application of neuro-fuzzy systems in the ﬁeld of geodesy and surveying engineering. Numerical examples showing how the systems work concerned: the approximation of functions of several variables to be used as algorithms in the Geographic Information Systems (the approximation of a terrain model), the transformation of coordinates, and the prediction of a time series. The accuracy characteristics of the results obtained have been taken into consideration.
Some data sets contain data clusters not in all dimension, but in subspaces. Known algorithms select attributes and identify clusters in subspaces. The paper presents a novel algorithm for subspace fuzzy clustering. Each data example has fuzzy membership to the cluster. Each cluster is defined in a certainsubspace, but the the membership of the descriptors of the cluster to the subspace (called descriptor weight) is fuzzy (from interval [0,1]) – the descriptors of the cluster can have partial membership to a subspace the cluster is defined in. Thus the clusters are fuzzy defined in their subspaces. The clusters are defined by their centre, fuzziness and weights of descriptors. The clustering algorithm is based on minimizing of criterionfunction. The paper is accompanied by the experimental results of clustering. This approach can be used for partition of input domain in extraction rule base for neuro-fuzzy systems.
The paper shows methods of analysis and assessment of partnering relations of construction enterprises with the use of questionnaires, statistics, and fuzzy logic. The results were obtained from Polish, Slovak and Ukrainian enterprises. The definition of partnering in the construction industry indicates that it is a qualitative concept. By applying a scale in the questionnaire, and due to mathematical analysis of the data, the final research result, showing the level of partnering relations of construction enterprises, is rendered quantitatively.
This work depicts the effects of deep cryogenically treated high-speed steel on machining. In recent research, cryogenic treatment has been acknowledged for improving the life or performance of tool materials. Hence, tool materials such as the molybdenum-based high-speed tool steel are frequently used in the industry at present. Therefore, it is necessary to observe the tool performance in machining; the present research used medium carbon steel (AISI 1045) under dry turning based on the L9 orthogonal array. The effect of untreated and deep cryogenically treated tools on the turning of medium carbon steel is analyzed using the multi-input-multi-output fuzzy inference system with the Taguchi approach. The cutting speed, feed rate and depth of cut were the selected process parameters with an effect on surface roughness and the cutting tool edge temperature was also observed. The results reveal that surface roughness decreases and cutting tool edge temperature increases on increasing the cutting speed. This is followed by the feed rate and depth of cut. The deep cryogenically treated tool caused a reduction in surface roughness of about 11% while the cutting tool edge temperature reduction was about 23.76% higher than for an untreated tool. It was thus proved that the deep cryogenically treated tool achieved better performance on selected levels of the turning parameters.
The protection of Polish architectural heritage in the former eastern borderlands, accomplished through the conservation and technical securing of historical structures, constitutes one of the main programmes that are implemented by the Ministry of Culture and National Heritage. Currently, many Polish historical buildings in the former eastern borderlands are in a very bad technical condition. The load-bearing systems of these elements, as well as elements of their finish, require immediate emergency securing work. The basic steps that precede conservation work are emergency structural works, which guarantee the durability and stability of the entire historical substance. The specifics and complexity of the problem of the failure of historical buildings often demands an in-depth analysis of a series of factors that are difficult to measure and which are responsible for the cause and effect relationship during the early stage of the technical evaluation of a structure. The analyses of failures of numerous historical structures, for instance that were carried out by the authors, have become the inspiration for the search for effective methods of analysis that would allow for an in-depth analysis of the causes and effects of the failures in question. The DEMATEL method (Decision Making Trial and Evaluation Laboratory) that has been presented in this work, and its fuzzy extension, has lately become one of the more popular methods used in the cause-and-effect analysis of various phenomena. The authors demonstrated how this method works on the example of the evaluation and securing of the load-bearing system of the XVII Collegiate church of the Holy Trinity in the town of Olykha in the Volhynskiy Oblast, Ukraine.
The quality of the squeeze castings is significantly affected by secondary dendrite arm spacing, which is influenced by squeeze cast input parameters. The relationships of secondary dendrite arm spacing with the input parameters, namely time delay, pressure duration, squeeze pressure, pouring and die temperatures are complex in nature. The present research work focuses on the development of input-output relationships using fuzzy logic approach. In fuzzy logic approach, squeeze cast process variables are expressed as a function of input parameters and secondary dendrite arm spacing is expressed as an output parameter. It is important to note that two fuzzy logic based approaches have been developed for the said problem. The first approach deals with the manually constructed mamdani based fuzzy system and the second approach deals with automatic evolution of the Takagi and Sugeno’s fuzzy system. It is important to note that the performance of the developed models is tested for both linear and non-linear type membership functions. In addition the developed models were compared with the ten test cases which are different from those of training data. The developed fuzzy systems eliminates the need of a number of trials in selection of most influential squeeze cast process parameters. This will reduce time and cost of trial experimentations. The results showed that, all the developed models can be effectively used for making prediction. Further, the present research work will help foundrymen to select parameters in squeeze casting to obtain the desired quality casting without much of time and resource consuming.
The difficulty of innovation risk assessment makes it necessary to use a multi-criteria analysis. Innovative projects are related to unstructured problems and the uncertainty, therefore, the use of fuzzy logic in the innovation risk assessment is analyzed. This paper proposes a method of determining the weights of criteria in order to innovation risk assessment. The weights are determined by 5 general criteria and 14 detailed criteria of innovation risk assessment. The proposed method is an extension of the fuzzy AHP method. The extension consists in taking into consideration the group decision-making approach with experts’ psychological conditions. The groups of experts have been chosen based on an elaborated form. The form makes it possible to characterize the persons within the scope of different psychological conditions. The proposed method provides objective and rational decision-making. The paper presents also a comparison of results with the fuzzy AHP method without the group decision making. The weights obtained by the proposed method are more diversified and bring out the most important criteria.
The paper presents Gupta's relational decomposition technique expanded on linguistic level. It allows to reduce the hardware cost of the fuzzy system or the computing time of the final result, especially when referring to First Aggregation Then Inference (FATI) relational systems or First Inference Then Aggregation (FITA) rule systems. The inference result of the hierarchical system using decomposition technique is more fuzzy than of the classical system. The paper describes a linguistic decomposition technique based on partitioning the knowledge base of the fuzzy inference system. It allows to decrease or even totally remove a redundant fuzziness of the inference result.
An original fuzzy team control model is presented in this article. The model is based on a non-traditional combination of classical and contemporary achievements of management and mathematical theories of fuzzy logic and fuzzy sets. In methodological terms, the article also offers a set of tools for measuring and evaluating both team performance and the effectiveness of the team control system in the organization. Fuzzy tools and techniques for decision-making, studying of hidden effects and joint influences, and quantification of evaluations are employed in this set of tools. The suggested fuzzy model contributes to overcoming theoretical deficits on the issues of team control, and the methodology of team control fills a gap in the toolkit of team management. The results from verification of the fuzzy team control model at a small-sized Bulgarian enterprise are also discussed in this article. They indicate that it is possible to develop a fuzzy model for team control, increasing the effectiveness of the team control system in the enterprise.
The paper presents a technique for measuring membrane displacements with one motionless camera. The method consists in measuring the distance to an object based on one image obtained from a motionless camera with a fixed-focus lens. The essence of the proposed measurement technique is to determine changes of the distance between a membrane and a video camera based on analysis of changes in the focus view of a marker placed on the membrane plane. It is proven that the used technique allows to monitor the frequency and amplitude of the membrane vibration. The tests were performed for the oscillation frequency in the range from 0.5 Hz to 6 Hz and deviations from the neutral position in the range of ±3 mm.
The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics. Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points. Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
A new soft-fault diagnosis approach for analog circuits with parameter tolerance is proposed in this paper. The approach uses the fuzzy nonlinear programming (FNLP) concept to diagnose an analog circuit under test quantitatively. Node-voltage incremental equations, as constraints of FNLP equation, are built based on the sensitivity analysis. Through evaluating the parameters deviations from the solution of the FNLP equation, it enables us to state whether the actual parameters are within tolerance ranges or some components are faulty. Examples illustrate the proposed approach and show its effectiveness.
In the paper an approach to decision making in situations with non-point-like characterisation and subjective evaluation of the actions is considered. The decision situation is represented mathematically as fuzzy multiobjective linear programming (fMOLP) model, where we apply the reduced fuzzy matrices instead of fuzzy classical numbers. The fMOLP model with reduced parameters is decomposable into the set of point-like models and the point-like models enable effective construction of an optimisation procedure – fBIP, see Wojewnik (2006ab), extending the bireference procedure by Michalowski and Szapiro (1992). The approach is applied to a fuzzy optimization problem in the area of telecommunication services.