This article explores caring through feeding as an important aspect of transnational family life, and analyzes the practices connected to sending food products home, supervising what the family eats, and changing consumption patterns. It focuses on Filipino migrants to the United States who maintain transnational ties with their families. With a history of colonial encounter, the United States has been a popular migration destination, and has also strongly inﬂuenced food consumption. The study shows the ways in which packages from abroad (balikbayan boxes) express love and care, and how they allow migrants to control food consumption of the family in the country of origin. By looking at the goods the immigrants put in the packages, and the way these are received, it is possible to uncover the dynamics of love, care, and intimacy in transnational families, which often translate into power, tensions, and control among family-members. The article analyses how food products sent in the packages work, bringing with them new ideas and practices, creating imaginaries of migration, and building the social prestige of the immigrant. Using the concept of “social remittances”, the article also shows the changing patterns of food consumption in the Philippines.
Describing the gas boiler fuel consumption as a time series gives the opportunity to use tools appropriate for the processing of such data to analyze this phenomenon. One of them are ARIMA models. The article proposes this type of model to be used for predicting monthly gas consumption in a boiler room working for heating and hot water preparation. The boiler supplies heat to a group of residential buildings. Based on the collected data, three specific models were selected for which the forecast accuracy was assessed. Calculations and analyses were carried out in the R environment using “forecast” and “ggplot2” packages. A good quality of the obtained forecasts has been demonstrated, confirming the usefulness of the proposed analytical tools. The article summary also indicates for what purposes the forecasts obtained in this way can be used. They can be useful for diagnosing the correct operation of a heat source. Registering fuel consumption at a level significantly deviating from the forecast should be a signal to immediately diagnose the boiler room and the heat supply system and to explain the reason for this difference. In this way, it is possible to detect irregularities in the operation of the heat supply system before they are detected by traditional methods. The gas consumption forecast is also useful for optimizing the financial management of the property manager responsible for the operation of the boiler room. On this basis, operating fees or financial operations with the use of periodic surplus capital may be planned.
The paper presents selected issues related to the development of international coal markets. World consumption of coal dropped for the second year in a row in 2016, primarily due to lower demand from China and the U S. The share of coal in global primary energy consumption decreased to 28%. World coal production accounted to 3.66 billion toe and it was lower by 6.2% when compared to the previous year. More than 60% of this decline took place in China. The decline in global production was more than four times higher than the decrease in consumption. The sufficiency of world resources of coal are estimated at 153 years – that is three times more than the sufficiency of oil and gas resources. After several years of decline, coal prices increased by 77% in 2016. The current spot prices are at the level of $80/t and are close to the 2014 prices. In the European market, after the first half of the year, coal prices reached the level of around 66% higher than in the same period of the last year. The average price in the first half amounted to PLN 12.6/GJ, which is close to the 2012 prices. The share of spot trade in the total purchase amount accounted to approx. 20%. Prices in futures contracts can be estimated on the basis of the Japan-Australia contracts prices and prices in supplies to power plants located in Germany. On average, the prices in supplies to these power plants were higher by approximately 9% in the years 2010–2016 and prices in Australia – Japan contracts were 12% higher than CIF ARA prices in 2017. Global energy coal trade reached about 1.012 billion tonnes in 2016. In 2019, a decline by 4.8% is expected primarily due to the expected reduction in the demand in major importing countries in Asia.
Coal production in 2018 increased by 3.3% and amounted to 7.81 million tons. Compared to 2010, it increased by 620 million tons. The structure of coal production in the world is very stable in the analyzed period of 2010–2018. Steam coal dominates in production with a share of 77%. Since 1990, the share of coal in the consumption of primary energy carriers has fallen by 3% in the global economy. In the EU, the share of coal in the consumption of primary energy carriers is more than twice lower than in the world, and in 2018 amounted to 13%. BP estimates the sufficiency of coal proven reserves based on 2018 data for the next 132 years. For oil and gas, they are estimated at 51 years. The decline in hard coal production in the European U nion can be dated almost continuously since 1990, which has decreased by 74%. In 2018, 74 million tons of coal were produced in the EU. In 2018, hard coal consumption in EU countries dropped to 226 million tons, i.e. by 20.6%. In 2018, global trade in steam coal amounted to 1.14 billion tons. The situation in China is crucial for the international coal market. The slight change in the import policy of this country significantly affects the situation in international trade in steam coal. In 2019, coal prices (at Newcastle, Richards Bay, ARA ports) dropped by an average of 23 U SD/ton. The average decreases for these three indices were 33%. The prices of steam coal in the forecasts presented in the paper are under pressure of the falling demand.
The main aim of this article is to present the results of research on energy poverty conducted in Katowice and Bytom, two cities situated in the Silesian voivodeship [region] in Poland. The study attempted to verify whether the energy divide concept elaborated by Bouzarovski and Tirado Herrero (2015) has different undiscovered dimensions which result not only from the differences in energy prices and incomes between various regions, but also from other factors such as consumer behaviours. In discussions about the energy divide, this aspect of energy poverty has so far been rather neglected. The question remains whether the distinction between energy poverty levels of countries, regions, and other territories like cities is determined by consumer behaviours or only by income and energy prices. Katowice and Bytom seem to be perfect places to conduct such. The most important conclusions emerging from the presented research are: (a) low income does not affect the behaviour of people suffering from energy poverty, even though it theoretically should; (b) despite their difficult financial situation, low-income households do little to improve their situation; and (c) public policy should take into account in the spatial distribution of households affected by energy poverty other aspects, including non-income and behavioural factors and patterns of persons affected by energy poverty, which only deepen existing social inequalities rather than reduce them.
The aim of this study was to analyze diesel fuel consumption in Poland and identification of the causes of changes in the needs of individual sectors of the economy for this type of fuel. Time range of the researches covered from 2004 to 2014. Data from the Central Statistical Office (CSO) were the source material. In the years 2004-2014 diesel consumption in Poland was 111 553 thousand tons. In 2014 domestic consumption of diesel fuel was 11 203 thousand tons and it was more than 2 times higher than the level of consumption of this fuel in 2004. The highest consumption of diesel in Poland in the period took place in 2012. The increase in the consumption of diesel fuel in Poland had benefited from increased demand for diesel in transport, which became a result of an increased amount of transport services. The share of transport in the consumption of diesel fuel in Poland for the period 2004- 2014 was about 75%. Another area, which consumes the largest quantity of DF in Poland is agriculture. Consumption of this fuel in agriculture in the years 2004- 2014 increased by 7%. DF consumption in industry and the manufacturing sector it was variable. DF biggest consumption in these sectors of the economy in the period was recorded in 2004. The analyzes did not allow to identify the specific causes of changes in the use of DF in the industry and manufacturing. In transport it showed a relationship between the consumption of diesel fuel and the amount of transport work and the transported cargo.
Balance, thermodynamic and mainly kinetic approaches using methods of process engineering enable to determine conditions under which iron technology can actually work in limiting technological states, at the lowest reachable fuel consumption (reducing factor) and the highest reachable productivity accordingly. Kinetic simulation can be also used for variant prognostic calculations. The paper deals with thermodynamics and kinetics of iron making process. It presents a kinetic model of iron oxide reduction in a low temperature area. In the experimental part it deals with testing of iron ore feedstock properties. The theoretical and practical limits determined by heat conditions, feedstock reducibility and kinetics of processes are calculated.
We introduce consumption habits into a real-business-cycle setup augmented with a detailed government sector. We calibrate the model to Bulgarian data for the period following the introduction of the currency board arrangement (1999-2018). We investigate the quantitative importance of the presence of internal consumption habits motive for the propagation cyclical fluctuations in Bulgaria. Allowing for internal habits in household’s consumption improves the model performance against data, and in addition this extended setup dominates the standard RBC model framework without habits. Therefore, the computational experiments performed in this paper suggest that habits are a quantitatively important model ingredient, which should be taken into consideration when analysing the effects of different policies in Bulgaria. This result can be viewed as an empirical validation of the habit model, and a rejection of the model without habits in the case of Bulgaria. In addition, we also demonstrate that internal habits are quantitatively more important than external habits for the Bulgarian business cycle.
The paper presents selected issues related to the development of international coal markets. World consumption of coal dropped for the second year in a row in 2016, primarily due to the lower demand from China and the US. The share of coal in global primary energy consumption decreased to 28%. World coal production accounted to 3.66 billion toe and it was lower by 6.2% when compared to the previous year. More than 60% of this decline took place in China. The decline in global production was more than four times higher than the decrease in consumption. The sufficiency of the world resources of coal are estimated at 153 years – that is three times more than the sufficiency of oil and gas resources. After several years of decline, coal prices increased by 77% in 2016. The current spot prices are at the level of $80/ton and are close to the 2014 prices. In the European market, after the first half of the year, coal prices reached the level of around 66% higher than in the same period of the last year. The average price in the first half amounted to PLN 12.6/GJ, which is close to the 2012 prices. The share of spot trade in the total purchase amount accounted to approx. 20%. Prices in futures contracts can be estimated on the basis of the Japan-Australia contracts prices and prices in supplies to power plants located in Germany. On average, the prices in supplies to these power plants were higher by approximately 9% in the years 2010 – 2016 and prices in Australia – Japan contracts were 12% higher than CIF ARA prices in 2017. Global energy coal trade reached about 1.012 billion tons in 2016. A decline by 4.8% is expected in 2019 primarily due to the expected reduction in demand in major importing countries in Asia.
Adaptive locomotion over difficult or irregular terrain is considered as a superiority feature of walking robots over wheeled or tracked machines. However, safe foot positioning, body posture and stability, correct leg trajectory, and efficient path planning are a necessity for legged robots to overcome a variety of possible terrains and obstacles.Without these properties, anywalking machine becomes useless. Energy consumption is one of the major problems for robots with a large number of Degrees of Freedom (DoF). When considering a path plan ormovement parameters such as speed, step length or step height, it is important to choose the most suitable variables to sustain long battery life and to reach the objective or complete the task successfully.We change the settings of a hexapod robot leg trajectory for overcoming small terrain irregularities by optimizing consumed energy and leg trajectory during each leg transfer. The trajectory settings are implemented as a part of hexapod robot simulation model and tested through series of experiments with various terrains of differing complexity and obstacles of various sizes. Our results show that the proposed energy-efficient trajectory transformation is an effective method for minimizing energy consumption and improving overall performance of a walking robot.
The predicted annual growth of energy consumption in ICT by 4% towards 2020, despite improvements and efficiency gains in technology, is challenging our ability to claim that ICT is providing overall gains in energy efficiency and Carbon Imprint as computers and networks are increasingly used in all sectors of activity. Thus we must find means to limit this increase and preserve quality of service (QoS) in computer systems and networks. Since the energy consumed in ICT is related to system load, ]this paper discusses the choice of system load that offers the best trade-off between energy consumption and QoS. We use both simple queueing models and measurements to develop and illustrate the results. A discussion is also provided regarding future research directions.
The paper presents a theoretical analysis of the effect of electric car performance characteristics on vehicle energy consumption and driving range. The test object was a Nissan Leaf electric vehicle. The characteristic curves of basic and additional resistance to motion (sum of rolling resistance and air resistance and inertia resistance or grade resistance, respectively) were applied to the model characteristic curve of electric motor torque of the tested vehicle. Based on that, the graphs describing the relationships between vehicle energy consumption and vehicle speed were made (for specific values of car acceleration / acclivity grade) as well as the relations between vehicle driving range and its traction properties. It was concluded that the use of performance characteristics significantly increased the vehicle’s energy consumption and decreased the available vehicle’s driving range.
The sustainable management of energy production and consumption is one of the main challenges of the 21st century. This results from the threats to the natural environment, including the negative impact of the energy sector on the climate, the limited resources of fossil fuels, as well as the unstability of renewable energy sources – despite the development of technologies for obtaining energy from the: sun, wind, water, etc. In this situation, the efficiency of energy management, both on the micro (dispersed energy) and macro (power system) scale, may be improved by innovative technological solutions enabling energy storage. Their effective implementation enables energy storage during periods of overproduction and its use in the case of energy shortages. These challenges cannot be overestimated. Modern science needs to solve various technological issues in the field of storage, organizational problems of enterprises producing electricity and heat, or issues related to the functioning of energy markets. The article presents the specificity of the operation of a combined heat and power plant with a heat accumulator in the electricity market while taking the parameters affected by uncertainty into account. It was pointed out that the analysis of the risk associated with energy prices and weather conditions is an important element of the decision-making process and management of a heat and power plant equipped with a cold water heat accumulator. The complexity of the issues and the number of variables to be analyzed at a given time are the reason for the use of advanced forecasting methods. The stochastic modeling methods are considered as interesting tools that allow forecasting the operation of an installation with a heat accumulator while taking the influence of numerous variables into account. The analysis has shown that the combined use of Monte Carlo simulations and forecasting using the geometric Brownian motion enables the quantification of the risk of the CHP plant’s operation and the impact of using the energy store on solving uncertainties. The applied methodology can be used at the design stage of systems with energy storage and enables carrying out the risk analysis in the already existing systems; this will allow their efficiency to be improved. The introduction of additional parameters of the planned investments to the analysis will allow the maximum use of energy storage systems in both industrial and dispersed power generation.
This paper presents a study on the effect of cleaning factors on the energy consumption of the cleaning process in a CIP system, and the correlation between single components of electricity necessary to perform this process and the cleanliness degree obtained. Studies were carried out in a laboratory cleaning station, wherein a plate heat exchanger contaminated with hot milk was included. The research program was developed according to a 5-level statistical plan. Based on the results, obtained with Experiment Planner 1.0, a regression function of energy requirement considering variables such as: cleaning time, temperature and flow rate of the cleaning liquid via the cleaned exchanger has been developed. Describing this relationship, linear and quadratic functions with double interactions were used. Significance level for the analysis was established at α = 0.05. Correlation analysis between components of the electricity necessary to perform the cleaning process (pump drive and heating of the cleaning agent) and the resulting degree of cleaning of heat exchanger plates was performed.
The paper presents the simulation analysis determining the effect of tyre energy efficiency class on fuel consumption of a passenger car. Calculations were made assuming the wheel movement on a dry and smooth asphalt road surface. The tests based on a simulation model were performed on 61 types of tyres, being characterised by different sizes and energy efficiency classes. Different values of rolling resistance coefficient were adopted (in accordance with energy efficiency classes), also, the values of basic and additional resistance to motion were determined. Based on them, engine speeds and load torque corresponding to respective specific fuel consumption were estimated. This parameter allowed the relationship between average mileage fuel consumption and tyre energy efficiency class to be determined on the basis of the NEDC test.
Mobile devices have become an integral part of our life and provide dozens of useful services to their users. However, usability of mobile devices is hindered by battery lifetime. Energy conservation can extend battery lifetime, however, any energy management policy requires accurate prediction of energy consumption, which is impossible without reliable energy measurement and estimation methods and tools. We present an analysis of the energy measurement methodologies and describe the implementations of the internal (profiling) software (proprietary, custom) and external software-based (Java API, Sensor API, GSM AT) energy measurement methodologies. The methods are applied to measure energy consumption on a variety of mobile devices (laptop PC, PDA, smart phone). A case study of measuring energy consumption on a mobile computer using 3DMark06 benchmarking software is presented
This paper studies the long-run relationship between consumption, labour income and asset wealth in Poland. Within cointegrated VAR model dynamic responses of the variables in the system to shocks are studied. In addition, series are decomposed into permanent and transitory components on the basis of the cointegrating relation found in the system. Main conclusion of this paper is that deviations of the three variables from their estimated long-run relationship are better explained with uctuations of labour income than assets. A tentative explanation of this nding is presented. Additionally, the magnitude of the asset wealth eect in Poland is calculated and compared with other studies for European countries and for the U.S.
In order to analyze the cumulative exergy consumption of an integrated oxy-fuel combustion power plant the method of balance equations was applied based on the principle that the cumulative exergy consumption charging the products of this process equals the sum of cumulative exergy consumption charging the substrates. The set of balance equations of the cumulative exergy consumption bases on the ‘input-output method’ of the direct energy consumption. In the structure of the balance we distinguished main products (e.g. electricity), by-products (e.g. nitrogen) and external supplies (fuels). In the balance model of cumulative exergy consumption it has been assumed that the cumulative exergy consumption charging the supplies from outside is a quantity known a priori resulting from the analysis of cumulative exergy consumption concerning the economy of the whole country. The byproducts are charged by the cumulative exergy consumption resulting from the principle of a replaced process. The cumulative exergy consumption of the main products is the final quantity.
In this article, an outline of the key questions connected with the essential problems of energy-consumption of air-stream moulding machines has been presented. Research results and calculations of requisite parameters appraisable of energy-consumption of air-stream moulding machines have been supplemented also by the data analysis of offer of the moulding machines manufacturers. The attention on constructional and technological factors which are favourable for the diminution of energy-consuming of the moulding process has been paid.
This research presents a 3D FE method for the simulation of the variable reluctance stepper motor dynamics. The proposed model is used to obtain the optimal minimum energy control law that minimizes the energy injected by the controller. The method is based on the strong coupling of field - circuit equations and extended to eddy current, motion and nonlinearity problem. The linearization technique for the coupled problem is presented. Also the lamination of the motor core is considered. In the paper the open - loop control problem is analyzed. The proposed model is validated by the comparison with measurements. Next, to demonstrate the effectiveness of the proposed optimal minimum energy control method is applied. In both cases, the examination of the variable reluctance stepper motor dynamics and the steel loss in the core is presented and compared.
This paper proposes an analysis of the effect of vertical position of the pivot point of the inverted pendulum during humanoid walking. We introduce a new feature of the inverted pendulum by taking a pivot point under the ground level allowing a natural trajectory for the center of pressure (CoP), like in human walking. The influence of the vertical position of the pivot point on energy consumption is analyzed here. The evaluation of a 3D Walking gait is based on the energy consumption. A sthenic criterion is used to depict this evaluation. A consequent reduction of joint torques is shown with a pivot point under the ground.
Analysis of power consumption presents a very important issue for power distribution system operators. Some power system processes such as planning, demand forecasting, development, etc.., require a complete understanding of behaviour of power consumption for observed area, which requires appropriate techniques for analysis of available data. In this paper, two different time-frequency techniques are applied for analysis of hourly values of active and reactive power consumption from one real power distribution transformer substation in urban part of Sarajevo city. Using the continuous wavelet transform (CWT) with wavelet power spectrum and global wavelet spectrum some properties of analysed time series are determined. Then, empirical mode decomposition (EMD) and Hilbert-Huang Transform (HHT) are applied for the analyses of the same time series and the results showed that both applied approaches can provide very useful information about the behaviour of power consumption for observed time interval and different period (frequency) bands. Also it can be noticed that the results obtained by global wavelet spectrum and marginal Hilbert spectrum are very similar, thus confirming that both approaches could be used for identification of main properties of active and reactive power consumption time series.