The aim of the article is to present the issue of risk and related management methods, with a particular emphasis on the conditions of investment in energy infrastructure. The work consists of two main parts; the first one is the theoretical analysis of the issue, while the second discusses the application of analysis methods on the example of the investment in an agricultural biogas plant. The article presents the definitions related to the investment risk and its management, with a particular emphasis on the distinction between the risk and uncertainty. In addition, the main risk groups of the energy sector were subjected to an analysis. Then, the basic systematics and the division into particular risk groups were presented and the impact of the diversification of investments in the portfolio on the general level of risk was determined. The sources of uncertainty were discussed with particular attention to the categories of energy investments. The next part of the article presents risk mitigation methods that are part of the integrated risk management process and describes the basic methods supporting the quantification of the risk level and its effects – including the Monte Carlo (MC), Value at risk (VaR), and other methods. Finally, the paper presents the possible application of the methods presented in the theoretical part. The investment in agricultural biogas plant, due to the predictable operation accompanied by an extremely complicated and long-term investment process, was the subject of the analysis. An example of “large drawing analysis” was presented, followed by a Monte Carlo simulation and a VaR value determination. The presented study allows for determining the risk in the case of deviation of financial flows from the assumed values in particular periods and helps in determining the effects of such deviations. The conducted analysis indicates a low investment risk and suggests the ease of similar calculations for other investments.
The aim of the paper is to point out that the Monte Carlo simulation is an easy and flexible approach when it comes to forecasting risk of an asset portfolio. The case study presented in the paper illustrates the problem of forecasting risk arising from a portfolio of receivables denominated in different foreign currencies. Such a problem seems to be close to the real issue for enterprises offering products or services on several foreign markets. The changes in exchange rates are usually not normally distributed and, moreover, they are always interdependent. As shown in the paper, the Monte Carlo simulation allows for forecasting market risk under such circumstances.
We propose the adaptation of Nested Monte-Carlo Search algorithm for finding differential trails in the class of ARX ciphers. The practical application of the algorithm is demonstrated on round-reduced variants of block ciphers from the SPECK family. More specifically, we report the best differential trails,up to 9 rounds, for SPECK32.
The purpose of this study is to identify relationships between the values of the fluidity obtained by computer simulation and by an experimental test in the horizontal three-channel mould designed in accordance with the Measurement Systems Analysis. Al-Si alloy was a model material. The factors affecting the fluidity varied in following ranges: Si content 5 wt.% – 12 wt.%, Fe content 0.15 wt.% – 0.3wt. %, the pouring temperature 605°C-830°C, and the pouring speed 100 g · s–1 – 400 g · s–1. The software NovaFlow&Solid was used for simulations. The statistically significant difference between the value of fluidity calculated by the equation and obtained by experiment was not found. This design simplifies the calculation of the capability of the measurement process of the fluidity with full replacement of experiments by calculation, using regression equation.
The sustainable management of energy production and consumption is one of the main challenges of the 21st century. This results from the threats to the natural environment, including the negative impact of the energy sector on the climate, the limited resources of fossil fuels, as well as the unstability of renewable energy sources – despite the development of technologies for obtaining energy from the: sun, wind, water, etc. In this situation, the efficiency of energy management, both on the micro (dispersed energy) and macro (power system) scale, may be improved by innovative technological solutions enabling energy storage. Their effective implementation enables energy storage during periods of overproduction and its use in the case of energy shortages. These challenges cannot be overestimated. Modern science needs to solve various technological issues in the field of storage, organizational problems of enterprises producing electricity and heat, or issues related to the functioning of energy markets. The article presents the specificity of the operation of a combined heat and power plant with a heat accumulator in the electricity market while taking the parameters affected by uncertainty into account. It was pointed out that the analysis of the risk associated with energy prices and weather conditions is an important element of the decision-making process and management of a heat and power plant equipped with a cold water heat accumulator. The complexity of the issues and the number of variables to be analyzed at a given time are the reason for the use of advanced forecasting methods. The stochastic modeling methods are considered as interesting tools that allow forecasting the operation of an installation with a heat accumulator while taking the influence of numerous variables into account. The analysis has shown that the combined use of Monte Carlo simulations and forecasting using the geometric Brownian motion enables the quantification of the risk of the CHP plant’s operation and the impact of using the energy store on solving uncertainties. The applied methodology can be used at the design stage of systems with energy storage and enables carrying out the risk analysis in the already existing systems; this will allow their efficiency to be improved. The introduction of additional parameters of the planned investments to the analysis will allow the maximum use of energy storage systems in both industrial and dispersed power generation.
The paper presents the core design, model development and results of the neutron transport simulations of the large Pressurized Water Reactor based on the AP1000 design. The SERPENT2.1.29 Monte Carlo reactor physics computer code with ENDF/BVII and JEFF 3.1.1 nuclear data libraries was applied. The full-core 3D models were developed according to the available Design Control Documentation and the literature. Criticality simulations were performed for the core at the Beginning of Life state for Cold Shutdown, Hot Zero Power and Full Power conditions. Selected core parameters were investigated and compared with the design data: effective multiplication factors, boron concentrations, control rod worth, reactivity coefficients and radial power distributions. Acceptable agreement between design data and simulations was obtained, confirming the validity of the model and applied methodology.
When an artificial neural network is used to determine the value of a physical quantity its result is usually presented without an uncertainty. This is due to the difficulty in determining the uncertainties related to the neural model. However, the result of a measurement can be considered valid only with its respective measurement uncertainty. Therefore, this article proposes a method of obtaining reliable results by measuring systems that use artificial neural networks. For this, it considers the Monte Carlo Method (MCM) for propagation of uncertainty distributions during the training and use of the artificial neural networks.
Basic gesture sensors can play a significant role as input units in mobile smart devices. However, they have to handle a wide variety of gestures while preserving the advantages of basic sensors. In this paper a user-determined approach to the design of a sparse optical gesture sensor is proposed. The statistical research on a study group of individuals includes the measurement of user-related parameters like the speed of a performed swipe (dynamic gesture) and the morphology of fingers. The obtained results, as well as other a priori requirements for an optical gesture sensor were further used in the design process. Several properties were examined using simulations or experimental verification. It was shown that the designed optical gesture sensor provides accurate localization of fingers, and recognizes a set of static and dynamic hand gestures using a relatively low level of power consumption.
Kolektory słoneczne są głównymi elementami solarnych systemów grzewczych. Praca tych urządzeń polega na konwersji energii promieniowania słonecznego na ciepło czynnika roboczego. Czynnikiem tym może być zarówno ciecz (glikol lub woda), jak i gaz (powietrze). Ze względu na konstrukcję wyróżnia się kolektory płaskie, próżniowe, próżniowo-rurowe i skupiające. Kolektory płaskie są stosowane przede wszystkim w budynkach, w których potrzeby cieplne są niskie lub średnie, czyli na przykład w gospodarstwach domowych. Rozwój kolektorów został ukierunkowany na zwiększenia wydajności oraz poprawy efektywności ekonomicznej inwestycji. W artykule oceniono wpływ zmiany powierzchni płaskich kolektorów słonecznych na opłacalność ekonomiczną inwestycji. Do analizy wytypowano dom jednorodzinny, zlokalizowany w województwie małopolskim, w którym instalacja przygotowania ciepłej wody użytkowej została rozbudowana o system solarny. System ten składa się z płaskich kolektorów, o łącznej powierzchni absorberów 5,61 m2. Jako czynnik roboczy w instalacji stosowany jest glikol. W celu poprawy efektu ekonomicznego zaproponowano zwiększenie powierzchni absorberów. Na podstawie trzyletnich pomiarów nasłonecznienia oraz efektów cieplnych instalacji, stworzono model ekonomiczny służący do oceny opłacalności zwiększenia powierzchni kolektorów słonecznych. Obliczenia z użyciem modelu promieniowania HDKR wykonano w środowisku Matlab dla lokalizacji Tarnów (najbliższej instalacji). Ponadto na podstawie rzeczywistych pomiarów z tej instalacji, odzwierciedlających wpływ wielu niemierzalnych czynników na efektywność przetwarzania energii słonecznej, wykonano symulacje efektu ekonomicznego dla różnych wielkości zapotrzebowania na ciepło. Otrzymane wyniki uogólniono, co daje możliwość ich wykorzystania w procesie doboru wielkości powierzchni kolektorów w przypadku podobnych instalacji.
This paper addresses the influence of land topography and cover on 3D radiative effects under cloudless skies in the Hornsund area, Spitsbergen, Svalbard. The authors used Monte Carlo simulations of solar radiation transfer over a heterogeneous surface to study the impact of a non-uniform surface on: (1) the spatial distribution of irradiance transmittance at the fjord surface under cloudless skies; (2) the spectral shortwave aerosol radiative forcing at the fjord surface; (3) normalized nadir radiance at the Top Of the Atmosphere (TOA) over the fjord. The modelled transmittances and radiances over the fjord are compared to the transmittances and radiances over the open ocean under the same conditions. The dependence of the 3D radiative effects on aerosol optical thickness, aerosol type, surface albedo distribution, solar azimuth and zenith angle and spectral channel is discussed. The analysis was done for channels 3 (459-479 nm) and 2 (841-876 nm) of the MODIS radiometer. In the simulations a flat water surface was assumed. The study shows that snow-covered land surrounding the fjord strongly modifies the radiation environment over the fjord surface. The enhancement of the mean irradiance transmittance over the fjord with respect to the open ocean is up to 0.06 for channel 3. The enhancement exceeds 0.11 in the vicinity of sunlit cliffs. The influence of the snow-covered land on the TOA radiance over the fjord in channel 3 is comparable to the impact of an increase in aerosol optical thickness of over 100%, and in lateral fjords of up to several hundred percent. The increase in TOA radiance is wavelength dependent. These effects may affect retrievals of aerosol optical thickness.
In this work, a fast 32-bit one-million-channel time interval spectrometer is proposed based on field programmable gate arrays (FPGAs). The time resolution is adjustable down to 3.33 ns (= T, the digitization/discretization period) based on a prototype system hardware. The system is capable to collect billions of time interval data arranged in one million timing channels. This huge number of channels makes it an ideal measuring tool for very short to very long time intervals of nuclear particle detection systems. The data are stored and updated in a built-in SRAM memory during the measuring process, and then transferred to the computer. Two time-to-digital converters (TDCs) working in parallel are implemented in the design to immune the system against loss of the first short time interval events (namely below 10 ns considering the tests performed on the prototype hardware platform of the system). Additionally, the theory of multiple count loss effect is investigated analytically. Using the Monte Carlo method, losses of counts up to 100 million events per second (Meps) are calculated and the effective system dead time is estimated by curve fitting of a non-extendable dead time model to the results (τNE = 2.26 ns). An important dead time effect on a measured random process is the distortion on the time spectrum; using the Monte Carlo method this effect is also studied. The uncertainty of the system is analysed experimentally. The standard deviation of the system is estimated as ± 36.6 × T (T = 3.33 ns) for a one-second time interval test signal (300 million T in the time interval).