Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 8
items per page: 25 50 75
Sort by:
Keywords ALS nDSM LULC changes

Abstract

The purpose of the study was an assessment of LiDAR point clouds for automating the mapping of land use and land cover changes, mainly land abandonment and the process of secondary forest succession. Detailed information about land cover was determined based on airborne laser scanning data. The presented study focuses on the analysis of the spatial range and structure of vegetation. The study area was located in Milicz district in the voivodeship of Lower Silesia – the central west part of Poland. The areas of interest were parcels where agricultural land had been abandoned and forest succession processes had progressed. Analysis of the spatial range of the secondary forest succession was carried out using a reclassified nDSM. Reclassification of the nDSM was done using > 1 m, > 2 m and > 3 m for the pixel values, representing the height of vegetation above the ground. Parameters such as height of vegetation, standard deviation of height and cover density were calculated, to show the process of the increase in forest succession on abandoned agricultural land. The results confirmed a discrepancy between the cadastral data and the actual use of the plots. In the study area, more than three times as much forested and wooded area was detected than had been recorded in official databases. Analyses based on airborne laser scanning point clouds indicated significant diversity in the vertical and horizontal structure of vegetation. The results demonstrated gradual succession of greenery in the research area.
Go to article

Abstract

The paper presents results of a study concerning an AlSi7Mg alloy and the effect of subjecting the liquid metal to four different processes: conventional refining with hexachloroethane; the same refining followed by modification with titanium, boron, and sodium; refining by purging with argon carried out in parallel with modification with titanium and boron salts and strontium; and parallel refining with argon and modification with titanium, boron, and sodium salts. The effect of these four processes on compactness of the material, parameters of microstructure, and fatigue strength of AlSi7Mg alloy after heat treatment. It has been found that the highest compactness (the lowest porosity ratio value) and the most favorable values of the examined parameters of microstructure were demonstrated by the alloy obtained with the use of the process including parallel purging with argon and modification with salts of titanium, boron, and sodium. It has been found that in the fatigue cracking process observed in all the four variants of the liquid metal treatment, the crucial role in initiation of fatigue cracks was played by porosity. Application of the process consisting in refining by purging with argon parallel to modification with Ti, B, and Na salts allowed to refine the microstructure and reduce significantly porosity of the alloy extending thus the time of initiation and propagation of fatigue cracks. The ultimate effect consisted in a distinct increase of the fatigue limit value.
Go to article

Abstract

The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc.) which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc.) and type of soil that is deposited. Airborne laser scanning (ALS) technology deliver point clouds (XYZ) and derivatives as raster height models (DTM, DSM, nDSM=CHM) which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc). The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc.) or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.
Go to article

Abstract

The purpose of this study was to determine the spatial structure of vegetation on the repository of the mine “Fryderyk” in Tarnowskie Góry. Tested area was located in the Upper Silesian Industrial Region (a large industrial region in Poland). It was a unique refuge habitat – Natura2000; PLH240008. The main aspect of this elaboration was to investigate the possible use of geotechniques and generally available geodata for mapping LULC changes and determining the spatial structure of vegetation. The presented study focuses on the analysis of a spatial structure of vegetation in the research area. This exploration was based on aerial images and orthophotomaps from 1947, 1998, 2003, 2009, 2011 and airborne laser scanning data (2011, ISOK project). Forest succession changes which occurred between 1947 and 2011 were analysed. The selected features of vegetation overgrowing spoil heap “Fryderyk” was determined. The results demonstrated a gradual succession of greenery on soil heap. In 1947, 84% of this area was covered by low vegetation. Tree expansion was proceeding in the westerly and northwest direction. In 2011 this canopy layer covered almost 50% of the research area. Parameters such as height of vegetation, crowns length and cover density were calculated by an airborne laser scanning data. These analyses indicated significant diversity in vertical and horizontal structures of vegetation. The study presents some capacities to use airborne laser scanning for an impartial evaluation of the structure of vegetation.
Go to article

Abstract

The aim of the present work was to evaluate the selectivity of nicosulfuron, alone and in combinations, applied in post-emergence (V4) of glyphosate and sulfonylurea tolerant (RR/STS) soybean. The experiments were conducted in 2015/16 and 2016/17, in Piracicaba – state of São Paulo (SP). In 2016/17, the experiment was also conducted in Palotina – state of Paraná (PR). The experiment was a randomized block design, with four repetitions and 16 treatments, with combinations of nicosulfuron, glyphosate, chlorimuron, sulfometuron and cloransulam, applied alone or in tank mixture. Crop injury and variables related to agronomic performance were evaluated. Data were subjected to analysis of variance and treatment means were compared by the Tukey test. The results obtained are significant in the positioning of herbicides in RR/STS soybean, since in the five experiments, all the treatments were selective, except for glyphosate + sulfometuron which reduced the yield of a cultivar (CD 2630 RR/STS) in the 2015/16 season.
Go to article

Abstract

Between 2004 and 2017, multiple studies on the herbicide resistance of weeds were conducted by the Institute of Plant Protection – National Research Institute in Poland. Weed seeds, collected from fields located in various regions of Poland where herbicide use was ineffective, were used in studies conducted under greenhouse conditions. A total of 261 loose silky bent (Apera spica-venti L.) samples were found to be herbicide resistant, which translates to 52.4% of the fields under study. Nearly 50% of the analyzed samples exhibited resistance to sulfonylurea herbicides. Resistance to acetyl CoA carboxylase (ACCase) inhibitors was found in 18 fields, whereas resistance to photosystem II (PSII) inhibitors (isoproturon) was found in 12 fields. Herbicide resistance of blackgrass (Alopecurus myosuroides Huds.) occurred in 26 of the fields under study. In addition, resistance of wild oat (Avena fatua L.) to acetyl CoA carboxylase inhibitors occurred in 10 spring cereal crops. In the case of winter wheat, resistance of cornflower (Centaurea cyanus L.) to tribenuron-methyl occurred in 23 fields. Scentless chamomile (Matricaria inodora L.) and field poppy (Papaver rhoeas L.) were resistant to tribenuron-methyl in four and three fields, respectively, of winter wheat. In the case of sugar beet, three biotypes of fat hen (Chenopodium album L.) and two biotypes of redroot amaranth (Amaranthus retroflexus L.) were resistant to metamitron. Horseweed (Conyza canadensis L.), which grows on railway tracks, exhibited resistance to glyphosate. This paper reviews all studies conducted in Poland on weed resistance. Based on the results, maps of weed resistance in Poland were created.
Go to article

Abstract

Archaeology of north-eastern Poland has been poorly recognized owing to vast forest areas and numerous lakes. This particularly refers to the Warmian–Masurian Voivodship, where forest covers over 30% of its area. Prospection of forested areas has become possible in Poland just over 10 years ago with the Airborne Laser Scanning (ALS) and Light Detection and Ranging (LiDAR). These techniques allow obtaining 3-D documentation of recognized and also unknown archaeological sites in the forested areas. Thanks to ALS/LiDAR prospection a significant number of archaeological structures have been identified also in the Warmia and Masuria regions. Among them oval-shaped hillforts, surrounded by perfectly spaced concentric moats and ramparts, located mainly on islands and in wetland areas, have raised particular attention. Based on field prospection and results of preliminary excavations, these objects have been considered as Iron Age hillforts. One of the best preserved objects of this type is on the Radomno Lake island, located several kilometres to the south of Iława town. Integrated geoarchaeological prospection of this hillfort emphasized benefits of using LiDAR in combination with results of geophysical prospection and shallow drillings. Applied methodology enabled to document the hillfort shape, and to study its geological structure and stratigraphy. The results clearly indicate that integration of LiDAR data with geophysical prospecting is indispensable in future archaeological surveys. It is a perfect tool for remote sensing of archaeological objects in forest areas, so far not available for traditional archaeology.
Go to article

Abstract

This article deals with Janusz Makarczyk’s bestselling historical romance Jafar of Baghdad, first published in 1950. Makarczyk had a varied career as a journalist, travel writer of the ‘globtrotter school’, military officer, diplomat and academic; his deep involvement with the Middle East and Arab history began in the 1926 when he was sent to the Polish consulate in Jerusalem. The life of Jafar ibn Yahya provided him not only with enough material for a gripping story of love and romance but also a pretext for painting a broad canvas of historical events and personages. Addressed to younger readers, the book is didactic in the sense that it offers them basic information about Islam (e.g. the division between the sunni and the shia) as well as lots of facts about the Arab world at the peak of the Abbasid Age (e.g. Harun al-Rashid and the struggle for his succession; rise and fall of the powerful Barmakid family, Harun al-Rashid’s half-sister Abassa; the great Islamic jurists Malik ibn Anas, Muhammad al-Shaybani and Al-Shafi ‘i; an assortment of poets and scholars, including the translator Ibn al-Muqaffa). In addition to countless allusions to the Book of the Thousand Nights and One Night, the narrative is encrusted with explicit and covert quotes from the Qur’an, Arabic adages and proverbs (32), the poems of Abu-l-’Atahiya and Abu Nuwas. The writer is aware that the allusions and learned references need to be contextualized in a way that is functional and that their incorporation into the main text must be handled with maximum flexibility. The great popularity of Jafar of Baghdad in its time can be taken as proof that Makarczyk did succeed in bringing the two functions of his novel, the cognitive and the aesthetic – to instruct and to please – into a harmonious whole.
Go to article

This page uses 'cookies'. Learn more