The paper deals with the application of the feed-forward and cascade-forward neural networks to mechanical state variable estimation of the drive system with elastic coupling. The learning procedure of neural estimators is described and the influence of the input vector size and neural network structure to the accuracy of state variable estimation is investigated. The quality of state estimation by neural estimators of different types is tested and compared. The simple optimisation procedure is proposed. Optimised neural estimators of the torsional torque and the load machine speed are tested in the open-loop and closed-loop control structure of the drive system with elastic joint, with additional feedbacks from the shaft torque and the difference between the motor and the load speeds. It is shown that torsional vibrations of the two-mass system are damped effectively using the closed-loop control structure with additional feedbacks obtained from the developed neural estimators. The simulation results are confirmed by laboratory experiments.
The paper deals with the application of the extended Kalman filters in the control structure of a two-mass drive system. In the first step only linear extended Kalman filter was used for the estimation of mechanical state variables of the drive including load torque value. The estimation algorithm showed good robustness to mechanical parameters variations. For the system with some parameters changing in the wide range, simultaneous estimation of the state variables and chosen system parameters is required. For this reason the non-linear extended Kalman filter, which estimates simultaneously state variables and mechanical parameters of the two-mass drive system, was developed. Parameters of covariance matrices of used Kalman filters were set using the genetic algorithm. Both proposed estimators were investigated in simulation and experimental tests, in the open-loop operation and in the state-feedback control system of the two-mass system.
In this paper, an analysis of the induction motor control scheme based on the Direct Rotor Flux Oriented Control (DRFOC) for a whole speed range, including fieldweakening (FW) regions is presented. Two field-weakening algorithms have been compared and verified through simulation with a 3.0 [kW] induction motor drive.