Studies on the quality of bituminous coal are mainly focused on physico-chemical analysis, examining the ash content, sulphur content, volatile matter content, moisture content, and the Net Calorific Value of coal. Until now, the above mentioned parameters form the basis of the Polish Standard PN-82/87002, on the basis of which individual types of bituminous coal are determined. In addition, an elemental analysis, providing information about the content of primary elements in the organic matter of solids, i.e. coal, hydrogen, nitrogen, oxygen, and sulphur, is carried out for the selected samples. This issue has been studied by many authors, which undoubtedly provide invaluable knowledge due to the huge amount of data, but, as the authors themselves indicate, the knowledge of the petrography of coal, coking properties (Probierz et al. 2012) and finally the coke obtained from individual coal types (based on tests carried out using the Karbotest installation or the so-called „box tests” performed in the coke oven battery) is still very limited. The article discusses the impact of petrographic composition on the quality of metallurgical coke. The analysis was performed using samples of coking coal from the following mines: Pniówek, Zofiówka, Borynia, and Krupiński. The mentioned coal types are used to produce coke mixtures used for the production of coke in the Przyjaźń and Radlin coking plants. Based on the rank of coal and physicochemical parameters, the mentioned coal types were classified according to the Polish classification and the UN/ECE International Classification of In-Seam Coals (UN/ECE 1995). The prediction of thermomechanical properties of coke (CSR and CRI) performed according to the original CCP method were compared with the results obtained using the classical method of Nippon Steel Corporation.
Go to article