Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 156
items per page: 25 50 75
Sort by:

Abstract

The distribution of planktonic Ostracoda (Halocyprididae) was studied based on vertically-stratified zooplankton samples collected by hauling 200 p.m - mesh net by day and by night during two austral seasons: summer 1985/1986 and winter 1989, from the 1200 m deep Croker Passage off the Antarctic Peninsula. Seven species of Ostracoda were recorded: Alacia belgicae, Alacia hettacra, Melaconchoecia isocheira, Metaconchoecia skogsbergi, Boroecia antipoda, Disconchoecia aff. elegans and Proceroecia brachyaskos. The first three species, endemic to Antarctic waters, were predominant (about 90%). Generally Ostracoda were most numerous in 600-200 m layer in summer and in 1000-400 m layer in winter. In the investigated area there was a clear contrast between the abundance of Ostracoda during austral summer and scarcity during austral winter.
Go to article

Abstract

In 1920 qualitative and quantitative benthos samples collected in Barents Sea sublittoral in the years 1951-1983 154 species, 77 genera and 30 families of Amphipoda Gammaridea were identified. Species diversity was highest among the Lysianassidae, Oedicerotidae, Ampcliscidae, Calliopiidae and Pleustidae. Ampelisca eschrichti clearly dominated the material. This same species, plus Haploops setosa and Anonyx nugax were both the most frequently occurring and most numerous species. The distribution of amphipods in the Barents Sea sublittoral varies both in diversity and numbers by region, depth, sediments and water temperature. Zoogeographical changes are discussed in the present paper. Altogether 331 species of amphipods have been hitherto collected in the Barents Sea, of which 317 species, 126 genera and 39 families belong to the suborder Gammaridea.
Go to article

Abstract

In the material of nearly 2000 individuals of Asteroidea collected in Admiralty Bay, the largest bay of the South Shetlands, 36 species were determined, enriching the list of hitherto known asteroid species of this basin by 17 taxa. One of them, Peribolaster macleani, is recorded for the first time in Western Antarctic. The most frequent and abundant asteroids of Admiralty Bay were Odonlaster validus, Psilaster charcoti, Bathybiaster loripes obesus and Diplasterias brucei. The bathymetric and geographic distribution of all species are discussed.
Go to article

Abstract

The avifaunistic observations carried out in the tundra valley of the Sob River's upper course (west slopes of the Polar Ural) in July 1995 revealed the occurrence of 39 breeding and 8 non-breeding bird species. The most numerous were Anthus pratensis, Calcarius lapponicus, Phylloscopus trochilus and Anthus cervinus. The great variety of wetland and aquatic habitats had a decisive influence on species-richness and abundance of birds (jointly 30 breeding and 4 non-breeding species). Areas of low humidity were inhabited by 14 whereas anthropogenic habitats by 4 species. Most of them (except for eurytopic A. pratensis and C. lapponicus) occupied one-two habitats irrespective of their numbers. The density of Buteo lagopus was estimated at 1.67-2.00 p/10 km2. Three species of distribution ranges laying to the south from the study area, namely Bucephala clangula, Dendrocopos major, Circus macrourus, were noted in the valley. The results obtained have been compared with available data on the avifauna of the region concerned.
Go to article

Abstract

226 papers by Polish authors and co-authors have been collected. They deal with Antarctic or sub-Antarctic fishes and also their parasites. The majority (35.7%) of the publications discuss fish biology including growth, age, maturity, feeding and occurrence of particular species in the area. Fewer papers are devoted to parasitology (26.0%). Papers dealing with fish biomass and exploitation make up 18.5%. Papers dealing with morphology and systematics make up 6.6%. The remaining papers are devoted to technology, physiology, palaeontology and others.
Go to article

Abstract

Starostinella nordica gen. et sp. n. is described from the uppermost Permian (Kapp Starostin Formation) of the Kapp Starostin (Isfjorden) in West Spitsbergen. The new genus is attributed to Trachypsammiidae Gerth - a family incertae sedis among Cnidaria. Members of the Trachypsammiidae have been previously associated with different higher rank taxa within the Cnidaria, or their skeletons were interpreted as a result of symbiosis of a cladochonoidal organism (Tabulata) with an indeterminate hydroid or stromatoporoid. S. nordica gen. et sp. n. seems to support the latter assumption. Hydrocoralla of S. nordica have a simpler structure than those of other Trachypsammiidae and are branching like those of Cladochonus. Their thick-walled, horn-shaped hydrocorallites are surrounded with a very thick cortical zone of sclerenchyme organized into trabecular microstructure. The proper corallite wall is fibro-radial in structure, sharply distinct from the outer cortical zone.
Go to article

Abstract

Properties of a snow cover in the vicinity of Arctowski Station, King George Island (West Antarctica) were studied in 1991. Variations of snow quality and physical transformations were analysed against changes of atmospheric parameters, basing on water equivalent index and repeatable examination of snow pits. Essential dependence of snow cover distribution and snow structure from local climatic features and terrain morphology was found. Thawing occurs in the whole mass of snow, with its contribution of both liquid and gas water phases.
Go to article

Abstract

Mid-winter rapid rise of temperature in the vicinity of Arctowski Station, King George Island (West Antarctica) was studied in 1991. Depending on circumantarctic migration of cyclones, sudden drop in air pressure and foehn-like phenomenon intensified by local topography occurred. Two such events are described on May 13 and June 28, against meteorological conditions during autumn and winter. Extreme intensification of morphogenetic processes caused degradation of a snow cover, immense meltwater discharge, radical transformation of slopes, effective aeolian activity and dynamic modifications in a sea-shore zone.
Go to article

Abstract

Peat soils (FAO — Gelic Histosols) in the southern Bellsund coast area occur on slopes and terraces. They are formed in places favourable for plant growth, i.e. adequately moistened and fertilized largely with bird excrements. These formations belong to moss peats which are generally decomposed weakly and moderately to about 0.5 m depth. Their content of organic matter is equal to about 30-90%, but it is higher in terrace peats. The latter are more acidified than slope peats. The reaction both of slope and terrace peat soils is as a rule, slightly acid or neutral, and CaC03 content does not exceed 10%. As regards the content of macroelements, that of Al is the highest followed by Ca, Fe, Mg and P. Little K and Ti, and only traces of Na are found. Microelements occur in the following sequence: Mn, Zn, Cu, Cr, Ni, Pb, Co, Cd. Particularly Mn, Zn as well as Cu and Cd were found in a higher concentration. Slope peat soils are richer in macro- and microelements than terrace ones, e.g. 4 times in the case of Mg. Peat soils poor in ash parts (up to 25% ash), contain the fewest elements. Some regularities concern also a vertical distribution of the particular profiles but only with regard to terrace peat soils.
Go to article

Abstract

The paper presents a spatial distribution of changes of air temperature (T) in the Arctic. Estimates of their spatial relations in the study region were based on a correlation analysis. T in the Arctic is most strongly correlated spatially in winter and spring, and least in summer. The radius of extent of statistically significant correlation coefficients of changes of T at the stations Svalbard Lufthavn, Ostrov Kotelny and Resolute A is equal to 2000-2500 km in winter and 1500-2000 km in summer. An attempt was done to delimit the regions of consistent occurrence of the anomalies T with respect to the signs and magnitudes, as well as of the regions with the most coherent T. The Wroclaw dendrite method was used to solve this problem. Relations of the mean areał T of the climatic regions and of the Arctic as a whole, with the northern hemisphere of temperature and selected climatic factors are presented.
Go to article

Abstract

Henryk Arctowski Station, the research station of the Polish Academy of Science in Admiralty Bay, King George Island, West Antarctica, is one of the most heavily visited bases in Antarctica. Between the seasons 1991/92 and 1996/97, 12884 tourists were recorded. A specially designed tourist trail was marked to divert visitors toward alternative attractions, not only the station buildings. Tourist management goals include: environmental protection, minimising waste and pollution, respecting the rules relating to protected areas, and prohibition of collections and souveniring.
Go to article

Abstract

Four Geodynamical Expeditions of the Polish Academy of Sciences carried through wide research seismic program in West Antarctica in 1979-1991. Three of these expeditions operated in the Bransfield Strait. The experiment of deep refraction and wide-angle reflection in West Antarctica focused on deep structure of the lithosphere, mainly of the Earth's crust. The network of deep seismic soundings (DSS) profiles covered all the Bransfield Strait. Five land stations on the South Shetland Islands, three stations on the Antarctic Peninsula and nine ocean bottom seismographs (OBS) recorded seismic waves, generated by explosions in a sea. The Bransfield Rift and the Bransfield Platform form a marginal basin against a volcanic arc of the South Shetland Islands. The paper presents new results of 2-D seismic modeling for network of five selected profiles. Four of them, ranging in lenght from 150 to 190 km, crossed main structures of the Bransfield Strait and the fifth, which connected the other ones and was 310 km long, ran along the Bransfield Rift. Two or three seismic models were presented for each profile. Finally, mutually corrected and controlled 2-D models of described profiles were constructed. They all presented spatial complex structure of the Earth's crust in a young rift of the Bransfield Strait, including extent of its main element i.e. anomalous high velocity body (HVB) (Vp > 7.4 km/s), detected in 10-30 km depth range except profile DSS-4 (southwest part of the Bransfield Strait). This inhomogeneity is interpreted as intrusion of the upper mantle (?asthenosphere) during stretching of the continental crust. The Moho discontinuity was found at depth 30-35 km, with velocities equal to about 8.1 km/s.
Go to article

Abstract

Metallic bearing alloys have different types, most of which are tin (Babbitt) or bronze based. Bronze bearings are used at heavy duty conditions. The goal of this research is an investigation on the effect of cooling rate and pouring temperature (two important factors in casting production) on the Brinell hardness and pin-on-disc wear resistance (two important properties in bearing applications) of bronze SAE660. The melt had prepared by induction furnace. Then, it had poured in sand mold in four different casting conditions, including pouring temperatures of 950 oC and 1200 oC, and cooling with water and air. Finally, the microstructure, hardness and wear resistance of the SAE660 had investigated. The results indicated that if the maximum hardness, along with the minimum weight loss due to wear (or maximum wear resistance) is required; the contents of intermetallic compounds, lead phase and the solid solution phase should be more. In this way, the samples which are cooled in air and poured at 950 oC have the high hardness and the lowest weight loss.
Go to article

Abstract

This work presents the project of the application of Case-based reasoning (CBR) methodology to an advisory system. This system should give an assistance by selection of proper alloying additives in order to obtain a material with predetermined mechanical properties. The considered material is silumin EN AC-46000 (hypoeutectic Al-Si alloy) that is modified by the addition of Cr, Mo, V and W elements in the range from 0% to 0.5% in the modified alloy. The projected system should indicate to the user the content of particular additives so that the obtained material is in the chosen range of parameters: tensile strength Rm, yield strength Rp0.2, elongation A and hardness HB. The CBR methodology solves new problems basing on the solutions of similar problems resolved in the past. The advantage of the CBR application is that the advisory system increases knowledge base as the subsequent use of the system. The presented design of the advisory system also considers issues related to the ergonomics of its operation.
Go to article

Abstract

It was found that the addition of carbon fibers (CFs) does not affect the crosslinking process in the microwave radiation (800 W, 2.45 GHz) of the BioCo2 binder, which is a water solution of poly(acrylic acid) and dextrin (PAA/D). It has influence on BioCo2 thermal properties. The CFs addition improves the thermostability of a binder and leads to the reduction of gas products quantity generated in the temperature range of 300-1100°C (TG-DTG, Py-GC/MS). Moreover, it causes the emission of harmful decomposition products such as benzene, toluene, xylene and styrene to be registered in a higher temperatures (above 700°C). BioCo2 binder without CFs addition is characterized by the emission of these substances in the lower temperature range. This indicates the positive effect of carbon fibers presence on the amount of released harmful products. The selected technological tests (permeability, friability, bending strength, tensile strength) have shown that the moulding sand with the 0.3 parts by weight carbon fibers addition displays the worst properties. The addition of 0.1 parts by weight of CFs is sufficient to obtain a beneficial effect on the analyzed moulding sands properties. The reduction of harmful substances at the higher temperatures can also be observed.
Go to article

Abstract

The necessity of obtaining high quality castings forces both researchers and producers to undertake research in the field of moulding sands. The key is to obtain moulding and core sands which will ensure relevant technological parameters along with high environmental standards. The most important group in this research constitutes of moulding sands with hydrated sodium silicate. The aim of the article is to propose optimized parameters of hardening process of moulding sands with hydrated sodium silicate prepared in warm-box technology. This work focuses on mechanical and thermal deformation of moulding sands with hydrated sodium silicate and inorganic additives prepared in warm-box technology. Tested moulding sands were hardened in the temperature of 140oC for different time periods. Bending strength, thermal deformation and thermal degradation was tested. Chosen parameters were tested immediately after hardening and after 1h of cooling. Conducted research proved that it is possible to eliminate inorganic additives from moulding sands compositions. Moulding sands without additives have good enough strength properties and their economic and ecological character is improved.
Go to article

This page uses 'cookies'. Learn more