The average grades of copper mines are dropped by extracting high grade copper ores. Based on the conducted studies in the mine field, the uncertainty of economic calculations and the insufficiency of initial information is observed. This matter has drawn considerations to processing methods which not only extracts low grade copper ores but also decreases adverse environmental impacts. In this research, an optimum cut-off grades modelis developed with the objective function of Net Present Value (NPV) maximization. The costs of the processing methods are also involved in the model. In consequence, an optimization algorithm was presented to calculate and evaluate both the maximum NPV and the optimum cut-off grades. Since the selling price of the final product has always been considered as one of the major risks in the economic calculations and designing of the mines, it was included in the modeling of the price prediction algorithm. The results of the algorithm performance demonstrated that the cost of the lost opportunity and the prediction of the selling price are regarded as two main factors directed into diminishing most of the cut-off grades in the last years of the mines’ production.
Polish brines are highly mineralized and can potentially be used for recovery of selected useful elements such as magnesium and potassium. They also contain a number of other elements, including iodine, bromine, boron, and strontium. The results of the examination of the chemical composition of groundwater from the Mesozoic formations (bromine, iodine, lithium, magnesium, and strontium content) of northern and central Poland were analyzed. The basic statistical parameters of the content of these elements (Br, I, Mg) in brines of the Triassic, Jurassic, and Cretaceous deposits and the content of lithium and strontium in waters of the entire Mesozoic formations were determined. In order to indicate aquifers that are the most suitable for the recovery of bromine, iodine, lithium, magnesium, and strontium, the relationship between concentrations and the depth of retention and dependencies between selected chemical components of these waters were analyzed. It has been found that the mineralization and concentrations of magnesium, bromine, and iodine increase with the age of aquifers, where these waters occur. Triassic waters are the most prospective for bromine and magnesium recovery among all analyzed aquifers. Furthermore, a relationship between the content of bromine, strontium, and magnesium has also been observed. The increase in the content of individual elements observed for lithium, strontium, and bromine with the increasing depth indicates a potential abundance of waters occurring at significant depths. The presented analysis is an approximation of the content of bromine, iodine, lithium, magnesium, and strontium; however, it may be the basis for further studies on the perspectives of using brines from the Mesozoic deposits of central and northern Poland as a source of chemical raw materials.
Due to the fact that the landfill deposition of municipal waste with the higher heating value (HHV) than 6 MJ/kg in Poland is prohibited, the application of waste derived fuels for energy production seems to be good option. There is a new combined-heat-and-power (CHP) plant in Zabrze, where varied solid fuels can be combusted. The formation of ashes originating from the combustion of alternative fuels causes a need to find ways for their practical application and demands the knowledge about their properties. Therefore, the present work is devoted to studying the co-combustion of solid recovered fuel (SRF) and coal, its impact on fly ash quality and the potential application of ashes to synthesis zeolites. The major objectives of this paper is to present the detail characteristics of ash generated during this process by using the advanced instrumental techniques (XRF, XRD, SEM, B ET, TGA). The co-combustion were carried out at 0.1 MWth fluidized bed combustor. The amount of SRF in fuel mixture was 1, 5, 10 and 20%, respectively. The focus is on the comparison the ashes depending on the fuel mixture composition. Generally, the ashes characterise high amounts of SiO2, Al2O3 and Fe2O3. It is well observed, that the chemical composition of ashes from co-combustion of blends reflects the amount of SRF addition. Considering the chemical composition of studied ashes, they can be utilize as a zeolites A. The main conclusions is that SRF can be successfully combusted with coal in CFB technology and the fly ashes obtained from coal + SRF fuel mixtures can be used to synthesis zeolites.
The optimization of cut-off grades is a fundamental issue for metallic ore deposits. The cut-off grade is used to classify the material as ore or waste. Due to the time value of money, in order to achieve the maximum net present value, an optimum schedules of cut-off grades must be used. The depletion rate is the rate of depletion of a mineral deposit. Variable mining costs are to be applied to the really excavated material, as some of the depletion can be left in-situ. Due to access constraints, some of the blocks that have an average grade less than the determined cut-off grade are left in-situ, some of them are excavated and dumped as waste material. Naturally, variable mining costs should be applied to the blocks of a mineral deposit that are actually excavated. The probability density function of an exponential distribution is used to find the portion of the depletion rate over the production rate that is to be left in-situ. As a result, inverse probability density function is to be applied as the portion of the depletion rate over the production rate that is to be excavated and dumped. The parts of a mineral deposit that are excavated but will be dumped as waste material incur some additional cost of rehabilitation that is to be included in the algorithm of the cut-off grades optimization. This paper describes the general problem of cut-off grades optimization and outlines the further extension of the method including various depletion rates and variable rehabilitation cost. The author introduces the general background of the use of grid search in cut-off grades optimization by using various depletion rates and variable rehabilitation cost. The software developed in this subject is checked by means of a case study.
Planning in a mining enterprise is a complex and multifaceted action. For this reason, it is necessary to provide its proper organisation and adjust it to the specific conditions of conducting underground mining extraction. The prepared plans must make up a cohesive internal system, unambiguously determining the manner, range and safety requirements of the conducted extraction. In the most general manner, the various types of plans developed by organisational units of mining enterprises can be divided based on the timeframe, type, scope and object of planning. These are strategic plans, tactical plans and subject-based plans. The aim of the article is to present the issue of production planning in a mining enterprise and for the preparation of such a plan, first and foremost, information about, among other things, applicable legal regulations, market conditions and the specificity of a mining enterprise are necessary. Underground extraction of black coal deposits must be conducted while respecting the rules of sustainable development which satisfies current needs, without compromising the ability to satisfy the needs of future generations. Due to the specific nature of mining production, manifested, among other things, by such features as the diversity of conditions for conducting the activity, resulting from the changing geological-mining conditions of the deposit, low flexibility of the production process, associated with the impossibility to conduct alternative production and a very long-lasting investment process, planning the course and magnitude of production in a mining enterprise must proceed with the highest possible diligence. One should take into account a wide range of presented environmental, organisational and technical conditions, deciding about the safety and correctness of the course of the assumed production activities. However, in order to make them economically feasible and produce satisfying results in that regard, it is also necessary to analyse them carefully with respect to financial outcomes