The quality of the supplied power by electricity utilities is regulated and of concern to the end user. Power quality disturbances include interruptions, sags, swells, transients and harmonic distortion. The instruments used to measure these disturbances have to satisfy minimum requirements set by international standards. In this paper, an analysis of multi-harmonic least-squares fitting algorithms applied to total harmonic distortion (THD) estimation is presented. The results from the different least-squares algorithms are compared with the results from the discrete Fourier transform (DFT) algorithm. The algorithms are assessed in the different testing states required by the standards.
Spectrometry, especially spectrophotometry, is getting more and more often the method of choice not only in laboratory analysis of (bio)chemical substances, but also in the off-laboratory identification and testing of physical properties of various products, in particular - of various organic mixtures including food products and ingredients. Specialised spectrophotometers, called spectrophotometric analysers, are designed for such applications. This paper is on the state of the art in the domain of data processing in spectrophotometric analysers of food (including beverages). The following issues are covered: methodological background of food analysis, physical and metrological principles of spectrophotometry, the role of measurement data processing in spectrophotometry. General considerations are illustrated with examples, predominantly related to wine and olive oil analysis.
Additional motor vibrations are the result of a faulty bearing. They are reflected in the harmonic content of stator currents. The object of the investigation presented in the paper are measurements related to diagnostics of induction motors, especially damages caused to bearings. Due to the fact that the amplitude of the network voltage basic harmonic in the current spectrum is high in comparison with components responsible for damages of bearings, preliminary elimination of this component from the analog current signal has been proposed. The problem with interpretation of diagnostic measurements in present systems is the difference between measurement results of characteristic frequencies and theoretical calculations. In the proposed measurement system this problem was solved in such a way that the value of the angular speed and of the supply frequency is calculated on the basis of appropriate components in the very same current spectrum that is further used in the search for diagnostic components. The paper presents also the measuring system and provides results of the investigations carried out on a motor encumbered with a specially prepared defect.
The paper presents a spectral formulation of surface profile irregularity in a wideband frequency range for roughness, waviness and shape components along the measured length. A unique distribution of roughness and waviness components is proposed, according to the nature of their origination in the course of machining with tools of defined cutting edge, as distinct from standard filtration in measurements of surface irregularities. Differences resulting from both formulations are outlined as well as the method of determining the frequency of component separation for surface roughness and waviness.
The paper describes the influence of the machining operation on a surface, which disturbs the projection of the tool profile in the form of its relative movements with respect to the object. The elements of the machine tool undergo constant wear during the machining process, it is therefore important to recognize the effects of their influence on the surface's irregularities. Amplitude-frequency analysis of lateral profiles has been used to evaluate and changes of turned lateral profiles. The results of simulation of radial and axial effects of the machine tool on surface and their spectral components were analyzed. Surfaces obtained in similar machining conditions on lathes operated in various time periods were analyzed spectrally. From the analysis of surface irregularity changes caused by disturbances in movements of the tool against the object, testifying the wear of main machine elements during its operation, the modulated, amplitude-frequency character of changes in surface irregularities of workpiece can be noticed.
The issue of auditory segregation of simultaneous sound sources has been addressed in speech research but was given less attention in musical acoustics. In perception of concurrent speech, or speech with noise, the operation of time-frequency masking was often used as a research tool. In this work, an ex- tension of time-frequency masking, leading to the removal of spectro-temporal overlap between sound sources, was applied to musical instruments playing together. The perception of the original mixture was compared with the perception of the same mixture with all spectral overlap electronically removed. Ex- periments differed in the method of listening (headphones or a loudspeaker), sets of instruments mixed, and populations of participants. The main findings were: (i) in one of the experimental conditions the removal of spectro-temporal overlap was imperceptible, (ii) perception of the effect increased when removal of spectro-temporal overlap was performed in larger time-frequency regions rather than in small ones, (iii) perception of the effect decreased in loudspeaker listening. The results support both the multiple looks hypothesis and the “glimpsing” hypothesis known from speech perception.
We discuss the notion of the financial cycle making a clear indication that the thorough study of its empirical properties in case of developing economies is still missing. We focus on the observed series of credit and equity and make formal statistical inference about the properties of the cycles in case of Polish economy. The non-standard subsampling procedure and discrete spectral characteristics of almost periodically correlated time series are applied to make formal statistical inference about the cycle. We compare the results with those obtained for UK and USA. We extract the cyclical component and confront empirical properties of the financial cycle for small open economy with those established so far in case of developed economies.
The aim of the article is to construct an asymptotically consistent test, based on a subsampling approach, to verify hypothesis about existence of the individual or common deterministic cycle in coordinates of multivariate macroeconomic time series. By the deterministic cycle we mean the periodic or almost periodic fluctuations in the mean function in cyclical fluctuations. To construct test we formulate a multivariate non-parametric model containing the business cycle component in the unconditional mean function. The construction relies on the Fourier representation of the unconditional expectation of the multivariate Almost Periodically Correlated time series and is related to fixed deterministic cycle presented in the literature. The analysis of the existence of common deterministic business cycles for selected European countries is presented based on monthly industrial production indexes. Our main findings from the empirical part is that the deterministic cycle can be strongly supported by the data and therefore should not be automatically neglected during analysis without justification.
The article is devoted to the problem of voice signals recognition means introduction in the system of distance learning. The results of the conducted research determine the prospects of neural network means of phoneme recognition. It is also shown that the main difficulties of creation of the neural network model, intended for recognition of phonemes in the system of distance learning, are connected with the uncertain duration of a phoneme-like element. Due to this reason for recognition of phonemes, it is impossible to use the most effective type of neural network model on the basis of a multilayered perceptron, at which the number of input parameters is a fixed value. To mitigate this shortcoming, the procedure, allowing to transform the non-stationary digitized voice signal to the fixed quantity of mel-cepstral coefficients, which are the basis for calculation of input parameters of the neural network model, is developed. In contrast to the known ones, the possibility of linear scaling of phoneme-like elements is available in the procedure. The number of computer experiments confirmed expediency of the fact that the use of the offered coding procedure of input parameters provides the acceptable accuracy of neural network recognition of phonemes under near-natural conditions of the distance learning system. Moreover, the prospects of further research in the field of development of neural network means of phoneme recognition of a voice signal in the system of distance learning is connected with an increase in admissible noise level. Besides, the adaptation of the offered procedure to various natural languages, as well as to other applied tasks, for instance, a problem of biometric authentication in the banking sector, is also of great interest.