Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 27
items per page: 25 50 75
Sort by:

Abstract

The paper shows a study on the relationship between noise measures and sound quality (SQ) features that are related to annoyance caused by the traffic noise. First, a methodology to perform analyses related to the traffic noise annoyance is described including references to parameters of the assessment of road noise sources. Next, the measurement setup, location and results are presented along with the derived sound quality features. Then, statistical analyses are performed to compare the measurement results and sound quality features. The included conclusions are focused on showing that the obtained loudness values, regardless of the used system, are similar in a statistical sense. Contrarily, sharpness, roughness and fluctuation strength values differ for the tools employed.
Go to article

Abstract

Urethane foam mattresses are commonly used as cushioning when placing panel flooring on the floor slab of a building. Urethane foam consists of elastic fibres with pores. Both elements can affect the performance of the insulation against impact sounds. However, these effects have not yet been detailed, and they may change if the material properties or constitution of the fibres and pores in the cushioning change. In this paper, we propose an analytical model for use in evaluating the performance of insulation against floor impact sound. This model was used to examine the contribution of the pores versus the elastic fibres to wave transmissions from the flooring surface to the slab. The results reveal that the constitution of the foam (either open or closed cells of pores) and the thickness and hardness of the cushion layer strongly affect the sound insulation performance of the floor.
Go to article

Abstract

Combine harvesters are the source a large amount of noise in agriculture. Depending on different working conditions, the noise of such machines can have a significant effect on the hearing condition of drivers. Therefore, it is highly important to study the noise signals caused by these machines and find solutions for reducing the produced noise. The present study was carried out is order to obtain the fractal dimension (FD) of the noise signals in Sampo and John Deere combine harvesters in different operational conditions. The noise signals of the combines were recorded with different engine speeds, operational conditions, gear states, and locations. Four methods of direct estimations of the FD of the waveform in the time domain with three sliding windows with lengths of 50, 100, and 200 ms were employed. The results showed that the Fractal Dimension/Sound Pressure Level [dB] in John Deere and Sampo combines varied in the ranges of 1.44/96.8 to 1.57/103.2 and 1.23/92.3 to 1.51/104.1, respectively. The cabins of Sampo and John Deere combines reduced and enhanced these amounts, respectively. With an increase in the length of the sliding windows and the engine speed of the combines, the amount of FD increased. In other words, the size of the suitable window depends on the extraction method of calculating the FD. The results also showed that the type of the gearbox used in the combines could have a tangible effect on the trend of changes in the FD.
Go to article

Abstract

The increment in the number of automobiles and the densification of the city has increased noise pollution rates. In addition, the lack of regulation in Chile regarding the acoustic insulation of façades is a problem of a growing concern. The main objective of the present study was to obtain a model of the Sound Insulation of housing, façades, stratified in Santiago, Chile, based on constructive variables. It is expected to serve as a basis for one future regulation for acoustic façades of houses. In the present study, tests based on the international ISO 140-5 standard were carried out in situ. An estimation model of the Standardized Level Difference Dls,2m,nT,w + C, was obtained based on the opening/façade proportion, and the type of glass used for the windows.
Go to article

Abstract

IIn this short communication, we revise a correlation for the saturated liquid isothermal compressibility based on the data available in DIPPR (Postnikov, 2016) which considers the molecular non-sphericity and addresses a problem of predicting speeds of sound in saturated long-chained alkanes. In addition, we correct a misprint appeared in the cited work and provide programming code used for the realisation of the proposed calculations.
Go to article

Abstract

The 16th International Symposium on Sound Engineering and Tonmeistering (ISSET) organized by the Institute of Radioelectronics and Multimedia Technology (Warsaw University of Technology), Department of Sound Engineering (Fryderyk Chopin University of Music) and the Polish Radio, under auspicious of the Polish Section of the Audio Engineering Society was held in Warsaw on October 8-10 in 2015. The main topics of the Symposium covered mostly all domains of audio engineering, i.e. musical acoustics, noise control, signal processing, room acoustics, radio and television, multimedia, sound engineering and tonmeistering, perception and quality assessment, and many others. The extra attention has been paid for the problems of loudness of audio programs in radio and TV broadcasting. Over 60 people from different branches of audio technology participated in this Symposium and shared their knowledge and experiences during the paper sessions, technical tours, workshops and special presentations. The selection of abstracts of the papers presented at the ISSET’2015 are inserted below.
Go to article

Abstract

The present paper is comparing the results of research studies carried out for three road acoustic screens of different design and different number of damping layers. For the tests, we selected timber or steel screens with a traditional multilayer structure and also one innovative type of simplified design. With respect to particular panels, their sound absorption properties were investigated in the reverberation chamber after they had been subjected to simulated weathering. In the process, two screens were subjected to the aging tests of 50–500 cycles in a special climatic chamber, and the innovative screens were subjected to 1000 cycles. The procedure was repeated every 50 or 100 cycles in order to obtain the changes of acoustic characteristics. The changes taking place in the absorbing material were also investigated with the use of scanning electron microscopy method (SEM). Basing on the obtained results and on the statistical analysis, the capability to maintain acoustic properties by the panels during their service life in natural conditions was estimated. For that purpose, linear statistical models were worked out, which were then applied to estimate the value of the single number sound absorption coefficient after successive aging cycles as well as the predicted time periods of acoustic class changes.
Go to article

Abstract

During the Polish Antarctic Geodynamic Expeditions, 1979-91, a wide geophysical and geological programme was performed in the transition zone between the Drake and South Shetland microplates and the Antarctic Plate, in West Antarctica. In the Bransfield Strait area, and along passive continental margin of the Antarctic Peninsula, 20 deep seismic sounding profiles were made. The interpretation yielded two - dimensional models of the crust and lithosphere down to 80 km depth. In the coastal area between the Palmer Archipelago and the Adelaide Island, the Earth's crust has a typical continental structure. Its thickness varies from 36 to 42 km in the coastal area, decreasing to about 25-28 km toward Pacific Ocean. In the surrounding of Bransfield Strait, the Moho boundary depth ranges from 10 km beneath the South Shetland Trench to 40 km beneath Antarctic Peninsula. The crustal structure beneath the Bransfield Strait trough is highly anomalous. Presence of a high-velocity body, with longitudinal seismic wave velocities Vp > 7,0 km/s, was detected there in the 6-32 km depth range. This inhomogeneity was interpreted as an intrusion, coinciding with the Deception-Bridgeman volcanic line. In the transition zone from the Drake Passage to the South Shetland Islands, a seismic boundary in the lower lithosphere occurs at a depth ranging from 35 to 80 km. The dip of both the Moho and this boundary is approximately 25° towards the southeast, indicating the direction of subduction of the Drake Plate lithosphere under the Antarctic Plate. Basing on the results of four Polish Geodynamic Expeditions, the map of crustal thickness in West Antarctica is presented.
Go to article

Abstract

The study makes an attempt to model a complete vibrating guitar including its non-linear features, specifically the tension-compression of truss rod and tension of strings. The purpose of such a model is to examine the influence of design parameters on tone. Most experimental studies are flawed by uncertainties introduced by materials and assembly of an instrument. Since numerical modelling of instruments allows for deterministic control over design parameters, a detailed numerical model of folk guitar was analysed and an experimental study was performed in order to simulate the excitation and measurement of guitar vibration. The virtual guitar was set up like a real guitar in a series of geometrically non-linear analyses. Balancing of strings and truss rod tension resulted in a realistic initial state of deformation, which affected the subsequent spectral analyses carried out after dynamic simulations. Design parameters of the guitar were freely manipulated without introducing unwanted uncertainties typical for experimental studies. The study highlights the importance of acoustic medium in numerical models.
Go to article

Abstract

The lithospheric transect South Shetland Islands (SSI) — Antarctic Peninsula (AP) includes: the Shetland Trench (subductional) and the adjacent portion of the SE Pacific oceanic crust; the South Shetland Microplate (younger magmatic arc superimposed on continental crust); the Bransfield Rift and Platform (younger back-arc basin); the Trinity Horst (older magmatic arc superimposed on continental crust); the Gustav Rift (Late Cenozoic) and James Ross Platform (older back-arc basin). Deep seismic sounding allowed to trace the Moho discontinuity at about 30 km under South Shetlands and at 38—42 km in the northern part of Antarctic Peninsula (Trinity Horst), under typical continental crust. Modified crust was recognized under Bransfield Strait. Geological interpretation based on deep seismic refraction and multichannel reflection soundings, and surface geological data, is presented.
Go to article

Abstract

During the Polish Antarctic Geodynamical Expeditions in 1979-91, deep seismic sounding measurements were performed in the transition zone between the Drake and South Shetland Microplates and the Antarctic Plate in West Antarctica. For the Bransfield Strait area, the seismic records of five land stations in South Shetland Islands and two stations at the Antarctic Peninsula were used. The interpretation yielded two—dimensional models of the crust and lithosphere down to 80 km depth. In the uppermost crust, the unconsolidated and poorly consolidated young sediments with velocities of 1.9 — 2.9 km/s cover the layers 4.0—4.2 and 5.6—5.9 km/s. The crustal structure beneath the trough of Bransfield Strait is highly anomalous. The presence of a high velocity body, with longitudinal seismic wave velocities vp > 7.0 km/s, was detected in the 6 — 30 km depth range. This inhomogeneity was interpreted as an intrusion, coinciding with the Deception—Bridgeman volcanic line. For the uppermost crust, a qualitative comparison was made between the results from the reflection profiles (GUN) and deep seismic sounding profiles (DSS). In the study area, the Moho boundary depth ranges from 10 km beneath the South Shetland Trench to 40 km under the Antarctic Peninsula. In the transition zone from the Drake Passage to the South Shetland Islands, a seismic boundary in the lower lithosphere occurs at a depth ranging from 35 to 80 km. The dip of both the Moho and this boundary is approximately 25°, and indicates the direction of subduction of the Drake Plate lithosphere under the Antarctic Plate. The results obtained were compared with earlier results of seismic, gravity and magnetic surveys in West Antarctica. A scheme of geotectonic division and a geodynamical model of the zone of subduction of the Drake Plate under the Antarctic Plate is compared with subduction zones in other areas of the circum-Pacific belt.
Go to article

Abstract

This paper proposes a comprehensive study on machine listening for localisation of snore sound excitation. Here we investigate the effects of varied frame sizes, and overlap of the analysed audio chunk for extracting low-level descriptors. In addition, we explore the performance of each kind of feature when it is fed into varied classifier models, including support vector machines, k-nearest neighbours, linear discriminant analysis, random forests, extreme learning machines, kernel-based extreme learning machines, multilayer perceptrons, and deep neural networks. Experimental results demonstrate that, wavelet packet transform energy can outperform most other features. A deep neural network trained with subband energy ratios reaches the highest performance achieving an unweighted average recall of 72.8% from four types for snoring.
Go to article

Abstract

Macroporous silica fibers having spherical cavities were fabricated by electrospinning using the spinning solution prepared from the mixed dispersion of tetraethylorthosilicate (TEOS) and polystyrene nanospheres as precursor and sacrificial templates, respectively, by injection through metallic nozzle. By applying electric field, the electro-spun fibers obtained by evaporation-driven self-assembly were collected on flat substrate or rotating drum, followed by the removal of the templates by calcination. The sound absorption coefficient of the porous fibers was measured by impedance tube, and the measured value was larger than 0.9 at high frequency region of incident waves. The surface of the resulting fibers was modified using fluorine-containing silane coupling agent to produce superhydrophobic fibrous materials to prevent the infiltration of humidity.
Go to article

Abstract

The distribution of perturbations of pressure and velocity in a rectangular resonator is considered. A resonator contains a gas where thermodynamic processes take place, such as exothermic chemical reaction or excitation of vibrational degrees of a molecule’s freedom. These processes make the gas acoustically active under some conditions. We conclude that the incident and reflected compounds of a sound beam do not interact in the leading order in the case of the periodic sound with zero mean pressure including waveforms with discontinuities. The acoustic field before and after forming of discontinuities is described. The acoustic heating or cooling in a resonator is discussed.
Go to article

Abstract

High−frequency acoustic measurements supplemented by a modern optical method, Laser Optical Plankton Counter (LOPC), allowed us to perform a comparative analysis through the application of a mathematical model. We have studied the correspondence between measured and modelled echoes from zooplankton aggregations consisted mainly of two Calanus species. Data were collected from the upper 50 m water layer within the hydrographical frontal zone on the West Spitsbergen Shelf. The application of a “high− −pass” model of sound scattering by fluid−like particles to the distribution of zooplankton sizes measured by LOPC resulted mostly in very good agreement between the measured (420 kHz BioSonics) and modelled values, except for cases with very low zooplankton abundance or with occurrence of stronger scatterers ( e.g. macrozooplankton, fish). An acoustic model validated for the elastic parameters of zooplankton confirmed that particles smaller than 1 mm in diameter, although highly abundant, did not contribute significantly to the sound scattering process at a frequency of 420 kHz. The implementation of diverse complementary methods has great potential to obtain high spatial and temporal resolution in zooplankton distribution studies; however, their compatibility has to be tested first.
Go to article

Abstract

For building applications, woven fabrics have been widely used as finishing elements of room interior but not in particular aimed for sound absorbers. Considering the micro perforation of the woven fabrics, they should have potential to be used as micro-perforated panel (MPP) absorbers; some measurement results indicated such absorption ability. Hence, it is of importance to have a sound absorption model of the woven fabrics to enable us predicting their sound absorption characteristic that is beneficial in engineering design phase. Treating the woven fabric as a rigid frame, a fluid equivalent model is employed based on the formulation of Johnson-Champoux-Allard (JCA). The model obtained is then validated by measurement results where three kinds of commercially available woven fabrics are evaluated by considering their perforation properties. It is found that the model can reasonably predict their sound absorption coefficients. However, the presence of perturbations in pores give rise to inaccuracy of resistive component of the predicted surface impedance. The use of measured static flow resistive and corrected viscous length in the calculations are useful to cope with such a situation. Otherwise, the use of an optimized simple model as a function of flow resistivity is also applicable for this case.
Go to article

Abstract

Passive noise reduction means are commonly used to reduce noise in the industry but, unfortunately, their effectiveness is poor in the low frequency range. By applying active structural acoustic control to the enclosure walls significant improvement of the insulating properties in this frequency range can be achieved. In this paper a model of double panel structure with ASAC is presented. The structure consists of two aluminium plates separated by an air gap. Two inertial magnetoelectric actuators and two piezoceramic MFC sensors were used for controlling the structure. A multichannel FxLMS algorithm with virtual error microphone technique is used as a control algorithm. The signal of a virtual error microphone is extrapolated basing on signals from MFC sensors. Performance of this actively controlled structure for tonal signals at selected frequencies is presented in the article. During the study, a double panel structure was mounted on one wall of sound insulating enclosure located in an acoustic chamber. During the measurements local and global reduction of noise test signal was investigated.
Go to article

Abstract

A rigorous analysis of sound radiation by a pulsating sphere forming a resonator together with a semi-spherical cavity is presented. Both hard/soft boundaries are considered, as well as mixed. The problem is solved by dividing the entire region into two subregions, one surrounding the sphere and containing the cavity and the other for the remaining half-space. Continuity conditions are applied to obtain the acoustic pressure. Then the acoustic radiation resistance is calculated both in the near- and far-field. The acoustic radiation reactance is calculated in the impedance approach. The resonance frequencies are determined, for which a significant growth of the sound pressure level is observed as well as the sound field directivity. These rigorous results are presented in the form of highly convergent, accurate and numerically efficient series.
Go to article

Abstract

The aim of this paper is to conduct a diachronic analysis of the Polish word rżysko ‘stubble’, whose root retains the primary designation of rye, namely reż ‘rye, obs.’. Although this noun was ousted by żyto ‘rye’, a derivative of the verb żyć ‘to live’, its cognates are still used in many Slavic and Germanic languages, e.g. Russian rožь (рожь) ‘rye’, and English rye. The paper presents other cognates with a view to contrasting the English word rye with its obsolete Polish cognate reż and understanding the evolution of both words. For this purpose, the study seeks to identify the sound changes responsible for the discrepancy between the Polish-English cognates which developed from *rughi-. The derivative rżysko ‘stubble’ has been analysed in the context of other nomina loci as well as the semantic change which affected the word. It is suggested that the phenomenon exemplifi ed by rżysko can be referred to as a root archaism.
Go to article

Abstract

Problems associated with designing silencers are presented. Results of direct tests of silencers for cooperation with systems of axial fans, as well as results of numerical tests of a two stage acoustic silencer, are given. The numerical tests enabled determining the distribution of acoustic field inside the silencer and in the surrounding area. In those tests A sound insertion losses for different variants of installation inside the silencer, as well as for two different types of absorbing material used to fill the silencer walls, were determined. Impact of design features of silencers on effectiveness of noise reduction is described. Also, a technical sketch of a universal silencer with significant noise reduction (DipS = 39:1 dB) which can be successfully used in many ventilation systems is presented
Go to article

Abstract

Considering the environmental pollution caused by waste rubber, some measures should be taken to improve the utilization rate of waste rubber. In this study, the effect of Ethylene Propylene Diene Monomer (EPDM) particles in the polyurethane (PU) foams on sound absorption behavior is investigated for improving sound environment within vehicles and reducing the environment pollution. EPDM of different contents and hardness are used as fillers for producing foams with different pore morphologies and sound absorption properties. The results show adds EPDM to foam would produce smaller pores, higher density and bigger air-flow resistivity. Simultaneously, there are better sound absorption properties of the PU foam composites in the medium frequency region and the better value can be obtained at the lower frequency with the content of EPDM increasing. The hardness of EPDM also shows better influence on sound absorption properties, especially in the medium frequency region. It means the foam pore morphologies have influence on sound absorption properties.
Go to article

This page uses 'cookies'. Learn more