Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 5
items per page: 25 50 75
Sort by:

Abstract

Height, frequency and spatial differentiation of atmospheric precipitation of the summer season for the period 1975-1982 are presented. Results of the respective investigations are compared with atmospheric precipitation in other areas of the western coast of Spitsbergen.
Go to article

Abstract

In this paper results of microstructural observations for series of CuZn39Pb2 alloys produced from qualified scraps are presented. The individual alloy melts were differentiated in terms of thermal parameters of continuous casting as well as refining methods and modifications. Structural observations performed by SEM and TEM revealed formation of different types of intermetallic phases including “hard particles”. EDS results show that “hard particles” are enrich in silicon, phosphorus, iron, chromium and nickel elements. Additionally, formation of Al-Fe-Si and Al-Cr in alloy melts was observed as well. It was found that quantity and morphology of intermetallic phases strongly depends upon the chemical composition of raw materials, process parameters, modifiers and refining procedure applied during casting. It was observed that refining process results in very effective refinement of intermetallic phases, whereas modifiers, particularly carbon-based, results in formation of large particles in the microstructure.
Go to article

Abstract

This paper deals with numerical and analytical modelling of a diamond or silicon particle embedded in a metallic matrix. The numerical model of an elastic particle in a metallic matrix was created using the Abaqus software. Truncated octahedron-shaped and spherical-shaped diamond particles were considered. The numerical analysis involved determining the effect of temperature on the elastic and plastic parameters of the matrix material. The analytical model was developed for a spherical particle in a metallic matrix. The comparison of the numerical results with the analytical data indicates that the mechanical parameters responsible for the retention of diamond particles in a metal matrix are: the elastic energy of the particle, the elastic energy of the matrix and the radius of the plastic zone around the particle. An Al-based alloy containing 5% of Si and 2% of Cu was selected to study the mechanical behaviour of silicon precipitates embedded in the aluminium matrix. The model proposed to describe an elastic particle in a metallic matrix can be used to analyze other materials with inclusions or precipitates.
Go to article

Abstract

Measurements of pollutants scavenged from air masses over southern Svalbard in summer precipitation are presented. Rainfall was sampled in July and August 2002 at Calypsobyen, Bellsund. Specific conductivity (SpC) and pH were measured and ion concentrations were determined by ion chromatography. Ions of marine origin were subtracted, assuming that all chlorides were of marine origin. The FLEXTRA trajectory model was applied to discover the sources of air masses arriving at Svalbard and track the paths of pollutant transport. Average (v/w) rainfall pH was 4.94, mean SpC amounted to 34.8 µS cm-1. Total dissolved solids concentration (TDS) ranged from 12.6 to 67 mg L-1, with ions of marine origin (Cl-, Na+, Mg2+) prevailing. Rains with the highest percentage of marine salts occurred with winds from the East at above average velocities. Non-sea salt (nss) sulphate concentrations ranged from 0.5 µeq L-1 to 23 µeq L-1, (v/w) average was 17 µeq L-1. Nitrate concentrations ranged from 0 to 24 µeq L-1. The highest concentrations of nss-SO42- and NO3- were measured on 25 August, when the highest rainfall occurred (27 mm) and pH was the lowest (4.65). Rainfall at Calypsobyen deposited 194 kg km-2 of acidifying anions and 263 kg km-2 of base cations over the recording period. The polluted air masses were mostly from northern and central Europe. Rainfalls scavenging air masses formed over Greenland and Norwegian Seas displayed similar concentrations, being probably polluted by SOx and NOx from ship emissions.
Go to article

Abstract

The combined effect of sulfur (S) and acid soluble aluminum (Als) content on precipitates and microstructures in grainoriented silicon steel were investigated. The results show that there are dominant AlN and a little amount of MnS-AlN composite in annealed hot-rolled band, and the amount of precipitates increases distinctly with increasing Als content, while S content plays a negligible role. The inhibitors that precipitate during hot band annealing can restrain the grain growth during hot band annealing and primary annealing, and the smaller grains of annealed hot-rolled band can contribute to the formation of {111} <112> texture during primary annealing. Lower S content is conducive to the formation of {111} <112> texture during primary annealing by promoting the formation of Goss texture during hot rolling.
Go to article

This page uses 'cookies'. Learn more