Search results

Filters

  • Journals
  • Authors
  • Contributor
  • Keywords
  • Date
  • Type

Search results

Number of results: 62
items per page: 25 50 75
Sort by:

Abstract

Studies were carried out from December 1978 till February 1979. Quantities of suspended matter in the waters of Admiralty Bay ranged from 2.8 to 182.6 mg/1. The maximum quantities of suspended matter were recorded in the inshore zone, in particular at the mouths of the streams running off from the pielting glaciers. In the open regions of Admiralty Bay the average quantities of suspended matter were: 12.4 mg/1 in the upper water-layers, from 14.9 to 16.7 at the depth of 10-50 m and less than 10 mg/1 in deeper water-layers. The quantity of suspended matter drifting from the land into Admiralty Bay during austrial summer was estimated as averaging about 2000 tons per day.
Go to article

Abstract

Seen from today’s perspective, the oceans seem to be a permanent and unchanging element of the Earth’s landscape. Yet various oceans have been formed and “consumed” in the planet’s ancient history.
Go to article

Abstract

We talk to Dr. Katarzyna Błachowiak-Samołyk, professor at the Department of Marine Ecology at the PAS Institute of Oceanology in Sopot, about the impact of human activity on life in the oceans.
Go to article

Abstract

Despite many years of research, we have yet to discover all the myriad ways various components of the climate interact. For instance, it looks likely that the circulation of oceanic waters has a much broader impact than previously thought.
Go to article

Abstract

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics. Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points. Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
Go to article

Abstract

Deep seismic sounding measurements were performed in the continent-ocean transition zone of north-western Spitsbergen , during the expedition ARKTIS XV/2 of the RV Polarstern and the Polish ship Eltanin in 1999. Profile AWI-99200 is 430 km long and runs from the Molloy Deep in the Northern Atlantic to Nordaustlandet in north-eastern Svalbard . Profile AWI-99400 is 360 km long and runs from the Hovgĺrd Ridge to Billefjorden. Seismic energy (airgun and TNT shots) was recorded by land (onshore) seismic stations (REF) and ocean bottom seismometers (OBS) and hydrophone systems (OBH). Good quality refracted and reflected P waves were recorded along the two profiles providing an excellent data base for a detailed seismic modelling along the profile tracks. Clear seismic records from airgun shots were obtained up to distances of 200 km at land stations and 50 km at OBSs. TNT explosions were recorded even up to distances of 300 km . A minimum depth of about 6 km of the Moho discontinuity was found east of the Molloy Deep. Here, the upper mantle exhibits P-wave velocity of about 7.9 km/s, and the crustal thickness does not exceed 4 km . The continent–ocean transition zone to the east is characterised by a complex seismic structure. The zone is covered by deep sedimentary basins. The Moho interface dips down to 28 km beneath the continental part of the 99200 profile, and down to 32 km beneath the 99400 profile. The P-wave velocity below the Moho increases up to 8.15 km/s. The continental crust consists of two or three crystalline layers. There is a lowermost crustal continental layer, in the 99400 profile’s model, with the P-wave velocity in order of 7 km/s, which does not exist in the continental crust along the 99200 profile. Additionally, along the 99200 profile, we have found two reflectors in the lower lithosphere at depths of 14–42 and 40–50 km dipping eastward, with P-wave velocity contrasts of about 0.2 km/s. The characteristics of the region bears a shear-rift tectonic setting. The continent–ocean transition zone along the 99200 profile is mostly dominated by extension, so the last stage of the development of the margin can be classified as rifting. The uplifted Moho boundary close to the Molloy Deep can be interpreted as a south-western end of the Molloy Ridge. The margin in the 99400 profile area is of transform character.
Go to article

Abstract

This paper attempts to allocate a segment of the Paleozoic Ocean situated in what is now Southeastern Europe (SEE) into a regional geological and paleotectonic synthesis connecting the sedimentary, metamorphic and igneous records associated with the ocean’s cycle. The Supragetic basement (external section of the Carpatho-Balkan arch) represents a tectonically reworked basement vestige of the Neoproterozoic–Lower Paleozoic oceanic floor system recrystallized under regional low temperature greenschist-facies conditions. The regional geological constraints associated with this low-grade basement are integrated with information from the overlying Silurian, Devonian and Lower Carboniferous cap-rocks of the “Kučaj Unit” to demonstrate the presence of a major Paleozoic ocean crossing this segment of SEE. In connection with the Lower Paleozoic north Gondwanan Pan- African processes, the low-grade Supragetic basement (including its Devonian cover) is in a complex relationship with the occasionally anchimetamorphic Silurian, Devonian, and Lower Carboniferous deep-water record of the polymetamorphic “Kučaj Unit”. The Upper Devonian–Lower Carboniferous flysch and molasse of the “Kučaj Unit” are interposed with the Neoproterozic–Lower Paleozoic oceanic vestige or with the Supragetic basement with the corresponding Devonian Balkan-Carpathian back-arc ophiolite-bearing lithosphere and its carrier (Danubian Unit). This regional-scale synthesis demonstrates that a segment of the Rheic Ocean referred to as the Saxo-Thuringian seaway and its suture lay to the east, underneath the Permian red-bed overstepping sequence and to the west of the Danubian aggregation. Unlike many of the high-pressure rocks characterizing the segment of the Rheic suture in the Central European Variscides, the SEE zone described here has only a mild overprint.
Go to article

Abstract

The Bulletin of the Polish Academy of Sciences: Technical Sciences (Bull.Pol. Ac.: Tech.) is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred: Artificial and Computational Intelligence, Biomedical Engineering and Biotechnology, Civil Engineering, Control, Informatics and Robotics, Electronics, Telecommunication and Optoelectronics, Mechanical and Aeronautical Engineering, Thermodynamics, Material Science and Nanotechnology, Power Systems and Power Electronics. Journal Metrics: JCR Impact Factor 2018: 1.361, 5 Year Impact Factor: 1.323, SCImago Journal Rank (SJR) 2017: 0.319, Source Normalized Impact per Paper (SNIP) 2017: 1.005, CiteScore 2017: 1.27, The Polish Ministry of Science and Higher Education 2017: 25 points. Abbreviations/Acronym: Journal citation: Bull. Pol. Ac.: Tech., ISO: Bull. Pol. Acad. Sci.-Tech. Sci., JCR Abbrev: B POL ACAD SCI-TECH Acronym in the Editorial System: BPASTS.
Go to article

Abstract

Biography and scientific achievements of Academician Leonid Maksimovich Brekhovskikh - Russian physicist, the founder of the scientific school of Ocean Acoustics, Doctor of Physics and Mathematics Sciences, Professor, Academician of the Russian Academy of Sciences.
Go to article

Abstract

Phytoplankton composition plays a major role in biogeochemical cycles of the ocean. The intensity of carbon fixation and export is strongly dependent on the phytoplankton community. Yet, the contribution of different types of phytoplankton to the total production on various communities is still poorly understood in the Indian Ocean sector of Southern Ocean (SO). Therefore the variability of chlorophyll- A (Chl-a) and diatoms in the frontal ecosystems of the Indian sector of SO have been investigated along with the sea surface temperature (SST), sea surface wind (SSW), photosynthetically active radiation (PAR), and nutrients datasets for the period of 1998-2012. Combined analysis of in-situ, model and satellite observations indicate that the variability of Chl- A and diatoms were primarily influenced by light and wind. The Chl- A was higher at the sub-Antarctic front (SAF) followed by the sub-tropical front (STF) and the polar front (PF). The diatom concentration was higher at the SAF followed by the PF and STF. Maximum concentration of Chl- A and diatoms commonly observed at the SAF region are probably due to the moderate PAR, SST and wind. Dominance of diatoms at the PF may be attributed to their adaptability for low light conditions. The results from this study in the frontal ecosystems would help to understand the biogeochemical cycle of the Indian sector of the SO.
Go to article

Abstract

Hybrid filter material was obtained via modification of polypropylene (PP) nonwoven with nanosize zinc oxide particles of a high aspect ratio. Modification was conducted as a three-step process, a variant of hydrothermal method used for synthesis of nano-ZnO, adopted for coating three dimensional polymeric nonwoven filters. The process consisted of plasma treatment of nonwoven to increase its wettability, deposition of ZnO nanoparticles and low temperature hydrothermal growth of ZnO rods. The modified nonwovens were investigated by a high resolution scanning electron microscopy (HR-SEM). It has been found that the obtained hybrid filters offer a higher filtration efficiency, in particular for so called most penetrating particle sizes.
Go to article

Abstract

Abstract An attempt has been made to determine the effect of an addition of colloidal suspensions of the nanoparticles of magnesium oxide on the structure of water glass, which is a binder for moulding and core sands. Nanoparticles of magnesium oxide MgO in propanol and ethanol were introduced in the same mass content (5wt.%) and structural changes were determined by measurement of the FT-IR absorption spectra.
Go to article

Abstract

One of the fundamental problems of modern geodesy is precise de fi nition of the gravitational fi eld and its changes in time. This is essential in positioning and navigation, geophysics, geodynamics, oceanography and other sciences related to the climate and Earth’s environment. One of the major sources of gravity data is satellite altimetry that provides gravity data with almost 75% surface of the Earth. Satellite altimetry also provides data to study local, regional and global geophysical processes, the geoid model in the areas of oceans and seas. This technique can be successfully used to study the ocean mean dynamic topography. The results of the investigations and possible products of altimetry will provide a good material for the GGOS (Global Geodetic Observing System) and institutions of IAS (International Altimetry Service). This paper presents the achievements in satellite altimetry in all the above disciplines obtained in the last years. First very shorly basic concept of satellite altimetry is given. In order to obtain the highest accuracy on range measurements over the ocean improved of altimetry waveforms performed on the ground is described. Next, signi fi cant improvements of sea and ocean gravity anomalies models developed presently is shown. Study of sea level and its extremes examined, around European and Australian coasts using tide gauges data and satellite altimetry measurements were described. Then investigations of the phenomenon of the ocean tides, calibration of altimeters, studies of rivers and ice-sheets in the last years are given.
Go to article

Abstract

In marine seismic wide−angle profiling the recorded wave field is dominated by waves propagating in the water. These strong direct and multiple water waves are generally treated as noise, and considerable processing efforts are employed in order minimize their influences. In this paper we demonstrate how the water arrivals can be used to determine the water velocity beneath the seismic wide−angle profile acquired in the Northern Atlantic. The pattern of water multiples generated by air−guns and recorded by Ocean Bottom Seismometers (OBS) changes with ocean depth and allows determination of 2D model of velocity. Along the profile, the water velocity is found to change from about 1450 to approximately 1490 m/s. In the uppermost 400 m the velocities are in the range of 1455–1475 m/s, corresponding to the oceanic thermocline. In the deep ocean there is a velocity decrease with depth, and a minimum velocity of about 1450 m/s is reached at about 1.5 km depth. Be − low that, the velocity increases to about 1495 m/s at approximately 2.5 km depth. Our model compares well with estimates from CTD (Conductivity, Temperature, Depth) data collected nearby, suggesting that the modelling of water multiples from OBS data might be − come an important oceanographic tool.
Go to article

Abstract

A series of nanocomposite graphene/CoFe2O4 and graphene/NiFe2O4 hybrid materials was synthesized via facile, one-pot solvothermal route. The materials were obtained using two pressure methods: synthesis in the autoclave and synthesis in the microwave solvothermal reactor. The use of a microwave reactor enabled to significantly shorten the synthesis time up to 15 min. All the syntheses were carried out in a solution of ethanol. The effect of processing conditions and composite composition on the physicochemical properties and electric conductivity was studied. The specific surface area, density, morphology, phase composition, thermal properties and electric conductivity of the obtained composites were investigated. The results of studies of composites obtained in an autoclave and in a microwave reactor were compared.
Go to article

Abstract

In this work, three ceramic composite coatings Al2O3-3TiO2 C, Al2O3-13TiO2 C, and Al2O3-13TiO2 N were plasma sprayed on steel substrates. They were deposited with two conventional powders differing the volume fraction of TiO2 and nanostructured powder. The mechanical and tribological properties of the coatings were investigated and compared. The increase in TiO2 content from 3 wt.% to 13 wt.% in the conventional feedstock improved the mechanical properties and abrasion resistance of coatings. However, the size of the used powder grains had a much stronger influence on the properties of deposited coatings than the content of the titania phase. The Al2O3-13TiO2 coating obtained from nanostructured powder revealed significantly better properties than that plasma sprayed using conventional powder, i.e. 22% higher microhardness, 19% lower friction coefficient, and over twice as good abrasive wear resistance. In turn, the Al2O3-13TiO2 conventional coating showed an increase in microhardness and abrasive wear resistance, 36% and 43%, respectively, and 6% higher coefficient of friction compared to the Al2O3-3TiO2 conventional coating.
Go to article

Abstract

The current study were performed in order to assess the fabrication possibility of the metal-ceramic composites based on nanocrystalline substrates. The influence of the variable time of the high energy ball-milling (10, 30 and 50 h) on the structure, pores morphology and microhardness of Ti/ZrO2 and Ti/Al2O3 compositions was studied. The X-ray diffraction analysis confirmed the composite formation for all milling times and sintering in the case of Ti/ZrO2 system. Decomposition of substrates during milling process of Ti/Al2O3 system was also observed. Additionally, the changes of lattice parameter as a function of milling time were studied. The morphology of powders and the microstructure of the sintered samples were observed by scanning electron microscopy (SEM). Also, analysis of microhardness and pores structure were performed.
Go to article

Abstract

Catalytic converters contain the catalytic substance in their structure, which is a mixture of Platinum Group Metals (PGMs). The prices of these metals and a growing demand for them in the market, make it necessary to recycle spent catalytic converters and recovery of PGMs. In the study, the effect of ozone and hydrogen peroxide application on the possibility of extracting PGM from used car catalysts was investigated. The catalytic carrier was milled, sieved and then the fractions with the desired grain size were treated with the appropriate HCl mixture and 3%, 5%, 10%, 15% and 30% H2O2, respectively, and the tests were also carried out at temperature 333 K. Ozone tests were conducted with the O3 flow in the range of 1,3,5 g/h. Samples for analysis were collected after 30 min, 1 h, 2 h, 3 h and after 4 h, respectively. The residue after the experiments and filtration process was also analysed. The obtained results confirmed the assumption that PGMs can be extracted using hydrochloric acid with the addition of H2O2 or ozone as oxidants. It allows to significantly intensify the carried out reactions and to improve the rate of PGMs transfer to the solution.
Go to article

Abstract

Hydrogen (H2) and liquid petroleum gas (LPG) sensing properties of SnO2 thin films obtained by direct oxidation of chemically deposited SnS films has been studied. The SnS film was prepared by a chemical technique called SILAR (Successive Ionic Layer Adsorption and Reaction). The sensor element comprises of a layer of chemically deposited SnO2 film with an overlayer of palladium (Pd) sensitiser. The Pd sensitiser layer was also formed following a chemical technique. The double layer element so formed shows significantly high sensitivity to H2 and LPG. The temperature variation of sensitivity was studied and the maximum sensitivity of 99.7% was observed at around 200°C for 1 vol% H2 in air. The response time to target gas was about 10 seconds and the sensor element was found to recover to its original resistance reasonably fast. The maximum sensitivity of 98% for 1.6 vol% LPG was observed at around 325°C. The sensor response and recovery was reasonably fast (less than one minute) at this temperature.
Go to article

Abstract

The paper presents the effect of ZrO2 layer deposition by the ALD process on the physicochemical properties of cobalt-based alloys (Realloy C and EOS CoCr SP2) intended for application in prosthetic dentistry. The paper shows the results of the surface roughness measurements made by the AFM method as well as the wettability and free surface energy measurements. Additionally,potentiodynamic tests of pitting corrosion resistance and electrochemical impedance spectroscopy in a solution of artificial saliva were carried out. Tests were carried out on the samples in the initial state and after surface modification with the ZrO2 layer. Based on these results, the usefulness (e.g. enhancement of corrosion resistance and biocompatibility) of the proposed ZrO2 layer on the cobalt alloys was assessed.
Go to article

Abstract

Methane (CH4) sensitivity of zinc oxide (ZnO) thin film has been studied in the present work. The sensor element comprises of a chemically fabricated ZnO semiconducting layer and a layer of palladium (Pd) as catalyst. The catalyst layer was formed on the surface of semiconducting ZnO following a wet chemical process from palladium chloride (PdCl2) solution. Fundamental features of a sensor element e.g. sensitivity, response time and recovery process has been studied. The effect of operating temperature on performance of the sensor material has been investigated and a choice of optimum temperature was made at around 200oC. The sensor element exhibited reasonable sensitivity of about 86% at this temperature in presence of 1 vol% methane (CH4) in air.
Go to article

Abstract

Al-CuO is a thermite material exhibiting the exothermic reaction only when aluminum melts. For wide spread of its application, the reaction temperature needs to be reduced in addition to the enhancement of total reaction energy. In the present study, a thermite nanocomposite with a large contact area between Al and CuO was fabricated in order to lower the exothermic reaction temperature and to improve the reactivity. A cryomilling process was performed to achieve the nanostructure, and the effect of composition on the microstructure and its reactivity was studied in detail. The microstructure was characterized using SEM and XRD, and the thermal property was analyzed using DSC. The results show that as the molar ratio between Al and CuO varies, the fraction of uniform nanocomposite structure was changed affecting the exothermic reaction characteristics.
Go to article

This page uses 'cookies'. Learn more