The largest glacier of the Petuniabukta area is the Hörbyebreen. It is among the tew on Spitsbergen whose marginal zones undergo areal decay. What has made in this type of glacier is a rich supra-glacial moraine cover that was formed as a result of a deformation of debris bands in the frontal part following a surge. In the marginal zone three subzones were distinguished differing in the degree of degradation of passive ice that covers almost all its area. They also differ in the stability of deposits and in the relief.
The aim of our study was to determine the influence of L-carnitine (L-CAR) on the cellular parameters of hen erythrocytes during a 48 hour exposure to L-CAR at concentrations of 25, 50 and 100 mg/mL in nutrient-deficient medium. Cell morphology, haemolysis, caspase 3/7 activity and glucose uptake (GU) were determined. The results showed a lower percentage of apoptotic cells and decreased haemolysis of erythrocytes treated for 48 hours at all the concentrations of L-CAR. The amino acid at 50 mg/mL inhibited the activity of proapoptotic caspase 3/7; however, it increased GU. In contrast, caspase 3/7 level was increased but GU was decreased in erythrocytes treated with 100 mg/mL of L-CAR when compared to the control. It may be hypothesized that reduction of apoptotic changes in hen erythrocytes may result from increased GU.
This is a short report about the first Cenozoic shark fossil from Svalbard. The specimen derives from the late Paleocene greenish sandstone of the Grumantbyen Formation, which is exposed in Fossildalen on the western side of Colesbukta on Spitsbergen. The single tooth is assigned to the Paleogene sand tiger shark genus Striatolamia that also is known from other polar regions. The Fossildalen specimen represents the northernmost Paleogene shark record, and is the second reported body fossil of a vertebrate from the Cenozoic of Spitsbergen.
Achene macro- and micromorphology and pericarp anatomy are described in four Polish species of Anemone (A. narcissiflora, A. nemorosa, A. ranunculoides, A. sylvestris). Biometric analysis showed that achene size varies greatly in all the studied species and is of limited diagnostic value. Three types of sculpture connected with the character of the indumentum were distinguished. The presence or absence of stomata on the achene style and the character of the hair base differentiated A. nemorosa and A. ranunculoides, which have the same type of pericarp ornamentation. The endocarp (number of layers and outline of its cells) was shown to be useful in the systematics of Anemone
The study assessed the effect of cumulative tropospheric ozone on the morphology of an ozone-sensitive (Bel W3) and an ozone-resistant (Bel B) tobacco cultivar, and two petunia cultivars (Mirage, White Cascade). The plants were exposed at two sites differing in tropospheric ozone level for two months during the 2008 growing season. Similar sets of plants were cultivated in control conditions. Morphological parameters of the plants were measured every week during the experiment. The correlation between the recorded results and the cumulative concentrations of tropospheric ozone measured at the two exposure sites was estimated. The ozone-sensitive tobacco cultivar showed increased visible damage after four weeks of the experiment, although ozone was relatively low during the preceding weeks, possibly confirming the cumulative effect of ozone on the plant response. The ozone-resistant tobacco cultivar showed higher mean plant growth and leaf growth than the ozone-sensitive one throughout the experimental period, but at the exposure sites the ozone-sensitive cultivar showed plant growth similar to or higher than the controls, especially at the forest site where ozone concentrations were higher. This suggests a plant defense against reduction of leaf assimilation area (i.e., against leaf necrosis). Petunia cv. Mirage showed lower growth at the control site and had fewer flowers than White Cascade at all sites. White Cascade had more flowers than Mirage in the last week of the experiment at the forest site where tropospheric ozone was higher. Its mean growth was higher at the forest site than at the other exposure site
The effect of combination grain refinement with AlTi5B1 master (55 ppm) and Sr-modification with AlSr5 master (20, 30, 40, 50 and 60 ppm) on the microstructure, tensile and hardness properties of AlSi7MgTi cast alloy were systematically investigated. Eutectic silicon was studied by optical and scanning electron microscopy after standard (0.5% HF) and deep etching (HCl). Morphology of eutectic Si changes from compact plate-like (as-cast state) to fibbers (after modification). Si-fibbers in samples with 50 and 60 ppm Sr coarsen probably as a result of over-modification. The optimum mechanical properties has the experimental material which was grain refined and modified with 40 ppm of Sr (UTS = 220.6 MPa; ductility = 6.1%, and 82.3 HBW 5/250/15).
Usnea aurantiaco-atra is the dominant flora around King George Island, Antarctica, whose specimens exhibited various phenotypes, even for those with the same ITS sequences in both mycobiont and photobiont. A comprehensive analysis of morphological traits of U. aurantiaco-atra including the reproductive structures, growth forms and ornamentation, cross section of the branches, and the substratum was carried out. Four arbitrary groups were identified based on their reproductive characters, but these groups cannot be distinguished from molecular phylogenetic trees based on fungal or algal ITS sequences. Further, the complicated morphological diversity of the thalli with the same ITS haplotypes in both mycobiont and photobiont suggest that some other factors in addition to the symbionts could influence the morphology of lichens. This implies that lichen is indeed a complex-mini-ecosystem rather than a dual symbiotic association of fungus and alga. Also, a lichenous fungi Phacopsis sp. was identified based on its anatomical characters and ITS sequence, which was also responsible for the black burls-like structures on U. aurantiaco-atra.
At thermal junctions of aluminium alloy castings and at points where risering proves to be difficult there appear internal or external shrinkages, which are both functionally and aesthetically inadmissible. Applying the Probat Fluss Mikro 100 agent, which is based on nano-oxides of aluminium, results in the appearance of a large amount of fine microscopic pores, which compensate for the shrinking of metal. Experimental tests with gravity die casting of AlSi8Cu3 and AlSi10Mg alloys have confirmed that the effect of the agent can be of advantage in foundry practice, leading to the production of castings without local concentrations of defects and without the appearance of shrinkages and macroscopic gas pores. Also, beneficial effect on the mechanical properties of the metal has been observed.
In this study, the effect of gas pressure on the shape and size of the AZ91 alloy powder produced by using the gas atomization method was investigated experimentally. Experiments were carried out at 820°C constant temperature in 2-mm nozzle diameter and by applying 4 different gas pressures (0.5, 1.5, 2.5 and 3.5 MPa). Argon gas was used to atomize the melt. Scanning electron microscope (SEM) to determine the shape of produced AZ91 powders, XRD, XRF and SEM-EDX analysis to determine the phases forming in the internal structures of the produced powders and the percentages of these phases and a laser measuring device for powder size analysis were used. Hardness tests were carried out to determine the mechanical properties of the produced powders. The general appearances of AZ91 alloy powders produced had general appearances of ligament, acicular, droplet, flake and spherical shape, but depending on the increase in gas pressure, the shape of the powders is seen to change mostly towards flake and spherical. It is determined that the finest powder was obtained at 820°C with 2 mm nozzle diameter at 3.5 MPa gas pressure and the powders had complex shapes in general.
The elemental composition and morphology of aerobic granules in sequencing batch reactors (GSBRs) treating high-nitrogen digester supernatant was investigated. The investigation particularly focused on the effect of the number of anoxic phases (one vs. two) in the cycle and the dose of external organics loading (450 mg COD/(L·cycle) vs. 540 mg COD/(L·cycle)) on granule characteristics. Granules in all reactors were formed of many single cells of rod and spherical bacteria. Addition of the second anoxic phase in the GSBR cycle resulted in enhanced settling properties of the granules of about 10.6% and at the same time decreased granule diameter of about 19.4%. The study showed that external organics loading was the deciding factor in the elemental composition of biomass. At 540 mg COD/(L·cycle) the granules contained more weight% of C, S and N, suggesting more volatile material in the granule structure. At lower organics loadings granules had the higher diameter of granules which limited the diffusion of oxygen and favored precipitation of mineral compounds in the granule interior. In this biomass higher content of Mg, P and Ca, was observed.
Monitoring of activated sludge flocs may provide important information for effective operation and control of wastewater treatment. The research objective is to demonstrate methodology for activated sludge image processing aimed to describe morphological characteristics of activated sludge flocs. The proposed software- -based method was presented and verified by analysis of several activated sludge samples. The results show high efficiency of image segmentation and floc recognition of more than 94% floc components. The analysis of a series of 50 pictures gives rapid and reliable results and can be performed in an automatic or semiautomatic mode. Given inherent heterogeneity of activated sludge flocs, multiple and repeated sample images capture (processing of 50 pictures at a time, repeated at least 4 times ) is recommended.
Berber languages outside Mauritania have a number of different morphological classes of vowel-final and semivowel-final verbs (“final weak verbs”). The situation in Zenaga of Mauritania looks very different. In this article, the Zenaga reflexes of the non- Mauritanian weak verbs are compared by studying all relevant cognates. As a result, it proves possible to establish to what extent the main weak verb classes of non- Mauritanian Berber are reflected in Zenaga, and to what extent certain irregularities can be understood from Zenaga-internal developments.
Despite great technological progress scientists still are not capable of ascertaining how many species are there on Earth. Systematic studies are not only time-consuming, but sometimes also significantly impeded by constraints of available equipment. One of the methods for morphology evaluation, which is gradually more often used for taxonomical research is microcomputed tomography. It’s great spatial resolution and ability to gather volumetric data during single acquisition without sectioning specimen are properties especially useful in evaluation of small invertebrates. Nondestructive nature of micro-CT gives possibility to combine it with other imaging techniques even for single specimen. Moreover, in case of rare organisms studies it allows to collect full structural data without fracturing their bodies. Application of proper staining, exposure parameters or specific sample preparation significantly improves quality of performed studies. The following article presents summary of current trends and possibilities of microtomography in morphology studies of small invertebrates.
Until recently, Festuca arietina was practically an unknown species in the flora of Eastern Europe. Such a situation can be treated as a consequence of insufficient studying of Festuca valesiaca group species in Eastern Europe and misinterpretation of the volume of some taxa. As a result of a complex study of F arietina populations from the territory of Ukraine (including the material from locus classicus), Belarus and Lithuania, original anatomy, morphology and molecular data were obtained. These data confirmed the taxonomical status of F arietina as a separate species. Eleven morphological and 12 anatomical characters, ITS1-5.8S-ITS2 cluster of nuclear ribosomal genes, as well as the models of secondary structure of ITS1 and ITS2 transcripts were studied in this approach. It was found for the first time that F arietina is hexaploid (6x = 42), which is distinguished from all the other narrow-leaved fescues by specific leaf anatomy as well as in ITS1-5.8S-ITS2 sequences. Molecular data indicating possible hybridogenous origin of F arietina, fall in line with the anatomical-morphological data and explain the tendency toward sclerenchyma strands fusion with formation of a continuous ring in F arietina, as well as E arietina ecological confinement to psammophyte biotopes.
Selected results of investigations concerning a shallow water part of the coastal zone, covering the surf zone and the swash zone, are presented. The above research has been carried out by means of field measurements, as well as data-driven and theoretical modelling. The investigations have led to development of a mathematical model of wave transformation and run-up on the shore in the Lagrangian system, as well as identification of infragravity waves (edge waves) in the multi-bar morphological beach system and their linkage with rhythmic shoreline forms (cusps). Some empirical relationships have been obtained for the description of number of bars in a bar system and dissipation of wave energy over such morphological structure. The experimental findings are based on field studies carried out at the IBW PAN Coastal Research Station (CRS) in Lubiatowo.
The paper presents the results of studies on quartzite milling in a ball mill. The milling was conducted in a batch system, for diversified compositions of balls. The milling product was subjected to granulometrical, morphological and strength analyses. On the basis of the developed Reid's theory and using the Austin-Gardner equation, a form of the function circumscribing the specific rate of comminution of selected size fractions was determined. The values of the breakage rate function bi, j for the mill's apparatus conditions were determined. The impact was investigated for a variable number of grinding media contact points on the values of specific rate S and the values of the breakage rate function bi, j. Furthermore, the values of coefficients occurring in the equations circumscribing the specific rate of milling S and breakage parameter bi, j were determined.
In this study, the modification mechanism and growth process of Al3(Sc, Zr) particles in as-cast Al-Si-Mg-Cu based alloy with addition of Sc and Zr were systematically investigated. It was found that 0.57 wt-%Sc addition caused a significant refinement in the average grain size of the investigated alloy, which brought about a remarkable transformation in as-cast microstructure, from thick dendritic shape to fine equiaxed structure. A large amount of primary Al3(Sc, Zr) particles with the dimension of around 5-6 μm were also observed within the equiaxed grain. Due to the identical orientation and similar crystal structure between primary Al3(Sc, Zr) particles and α-Al matrix, the primary particles always served as heterogeneous nucleus for the α-Al matrix. In addition, these cusped cubic primary Al3(Sc, Zr) particles showed triangle, star, rhomboid morphologies are generated from sectioning the particle in (111), (100) and (110) planes, respectively. Particularly, the typical eutectic structure which contained odd number-layer (Al3(Sc, Zr)+α-Al+ +Al3(Sc, Zr)) was observed within the investigated particles.
Under the name of ‘pivot derivation’, this article reconsiders a phenomenon known by Arab grammarians and lexicographers as well as by Arabists and Semitists: the derivation of a secondary lexical family from a primary one, via a morphologically ambiguous form. Through the examples of ma‘īn, masīḥ and ma/isāḥa, and a rereading of Mez (1906), it proposes several extensions of this type of derivation, made possible not only by homophony but also by homography or phonetic accidents, and compatible with the borrowing from other languages.
Iron is the most common and detrimental impurity in casting alloys and has been associated with many defects. The main consequence of the presence or adding of iron to AlSi alloys is the formation Fe-rich intermetallics with especially deleterious β-Al5FeSi. β-Al5FeSi phases are most often called needles on 2D micro sections, whilst platelets in 3D geometry. The x-ray tomography results have demonstrated Ferich phases with shapes different from simple forms such as needles or platelets and presented bent and branched phases. β grown as complicated structure of bent and branched intermetallics can decrease feeding ability, strengthen pores nucleation and eutectic colonies nucleation leading to lower permeability of mushy zone and porosity in the castings.
Experimental observations of the steel morphology as well as measurements of the solutes concentration in the macro-scale were made on the basis of the vertical cut at the mid-depth of the 15-tons steel forging ingot serially produced in one of the steel plant in Poland. Experimental observations of the morphology accompanied by the measurements of the Peclet Number were also made on the cross-section of the continuously cast brass ingots serially produced in the copper / brass industry in Poland. The performed measurements allowed to work out some maps of the alloying elements segregation for the longitudinal section of the steel static ingot and a Growth Law for the columnar grains formation in the brass ingots. The marginal stability criterion has been applied to the last mentioned development / description. Some suggestions for the micro-segregation measurement mode in the columnar structure are derived.
Iron is presented as an impurity in Al-Si alloys and occurs in the form of the β-Al5FeSi phase formations. The presence of iron and other elements in the alloy causes the formation of large intermetallic phases. Due to the high brittleness of this phase, it reduces the mechanical properties and increases the porosity. Manganese is used to inhibit the formation of this detrimental phase. It changes the morphology of the phase to polyhedral crystals, skeletal formations, or Chinese script. The present article deals with the influence of various amounts of manganese (0.1; 0.2; 0.4; 0.6 wt. %) on the formation of iron-based intermetallic phases in the AlSi7Mg0.3 alloy with different levels of iron content (0.4; 0.8, 1.2 wt. %). The increase of iron content in each alloy caused the creation of more intermetallic compounds and this effect has been more significant with higher concentrations of manganese. In alloys where the amount of 1.2 wt. % iron is present, the shape of eutectic silicon grain changes from angular to short needle type.
The paper presents research results of multilayer systems composed of alternate Cu/Ni layers. The layers thickness obtained by the galvanic treatment was determined by using the transmission electron microscopy and X-ray diffraction method in the grazing incidence diffraction geometry. The surface morphology was observed using scanning electron microscope with EDS microanalysis. Observation of the surface topography of systems using the atomic force microscope was also carried out.