Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 5
items per page: 25 50 75
Sort by:

Abstract

A vocal tract model based on a digital waveguide is presented in which the vocal tract has been decomposed into uniform cylindrical segments of variable lengths. We present a model for the real-time numerical solution of the digital waveguide equations in a uniform tube with the temporally varying cross section. In the current work, the uniform cylindrical segments of the vocal tract may have their different lengths, the time taken by the sound wave to propagate through a cylindrical segment in an axial direction may not be an integer multiple of each other. In such a case, the delay in an axial direction is necessarily a fractional delay. For the approximation of fractional-delay filters, Lagrange interpolation is used in the current model. Variable length of the individual segment of the vocal tract enables the model to produce realistic results. These results are validated with accurate benchmark model. The proposed model has been devised to elongate or shorten any arbitrary cylindrical segment by a suitable scaling factor. This model has a single algorithm and there is no need to make section of segments for elongation or shortening of the intermediate segments. The proposed model is about 23% more efficient than the previous model.
Go to article

Abstract

Large elongation in one de?nite direction of a crystal of cubic symmetry is considered. The equations of second order elasticity theory are applied. In this approximation three constants of the second order and six constants of the third order characterize the crystal. The stress is a function of the elongation direction. The elongation directions for which the stress reaches an extreme value have been analyzed.
Go to article

Abstract

Very well-known advantages of aluminum alloys, such as low mass, good mechanical properties, corrosion resistance, machining-ability, high recycling potential and low cost are considered as a driving force for their development, i.e. implementation in new applications as early as in stage of structural design, as well as in development of new technological solutions. Mechanical and technological properties of the castings made from the 3xx.x group of alloys depend mainly on correctly performed processes of melting and casting, design of a mould and cast element, and a possible heat treatment. The subject-matter of this paper is elaboration of a diagrams and dependencies between parameters of dispersion hardening (temperatures and times of solutioning and ageing treatments) and mechanical properties obtained after heat treatment of the 356.0 (EN AC AlSi7Mg) alloy, enabling full control of dispersion hardening process to programming and obtaining a certain technological quality of the alloy in terms of its mechanical properties after performed heat treatments. Obtained results of the investigations have enabled obtainment of a dependencies depicting effect of parameters of the solutioning and ageing treatments on the mechanical properties (Rm, A5 and KC impact strength) of the investigated alloy. Spatial diagrams elaborated on the basis of these dependencies enable us to determine tendencies of changes of the mechanical properties of the 356.0 alloy in complete analyzed range of temperature and duration of the solutioning and ageing operations.
Go to article

Abstract

Dispersion hardening, as the main heat treatment of silumins having additions of copper and magnesium, results in considerable increase of tensile strength and hardness, with simultaneous decrease of ductility of the alloy. In the paper is presented an attempt of introduction of heat treatment operation consisting in homogenizing treatment prior operation of the dispersion hardening, to minimize negative effects of the T6 heat treatment on plastic properties of hypereutectoidal AlSi17CuNiMg alloy. Tests of the mechanical properties were performed on a test pieces poured in standardized metal moulds. Parameters of different variants of the heat treatment, i.e. temperature and time of soaking for individual operations were selected basing on the ATD (Thermal Derivation Analysis) diagram and analysis of literature. The homogenizing treatment significantly improves ductility of the alloy, resulting in a threefold increase of the elongation and more than fourfold increase of the impact strength in comparison with initial state of the alloy. Moreover, the hardness and the tensile strength (Rm) of the alloy decrease considerably. On the other hand, combination of the homogenizing and dispersion hardening enables increase of elongation with about 40%, and increase of the impact strength with about 25%, comparing with these values after the T6 treatment, maintaining high hardness and slight increase of the tensile strength, comparing with the alloy after the dispersion hardening
Go to article

Abstract

Application of 1-naphthaleneacetic acid (NAA) or 1-aminocyclopropane-1-carboxilic acid (ACC) to maize roots growing in hydroponic solution inhibited root elongation, and increased radial growth, but the responses to those treatments differed in degree. Auxin was more effective than ACC as an elongation inhibitor and root swelling promoter. Whereas NAA fully inhibited elongation and maintained swelling over 48 h, ACC inhibited elongation partially (50%) and only promoted swelling for 24 h. It is well-known that auxin, like ACC, promotes ethylene production, but similar levels of ethylene production reached by means of NAA or ACC treatments did not elicit the same response, the response being always stronger to NAA than to ACC. These results suggest that the effect of auxin on root growth is not mediated by ethylene. Elongation and swelling of roots appear to be inversely related: usually a reduction in elongation was accompanied by corresponding swelling. However, these two processes showed different sensitivities to growth regulators. After 24 h treatment with 0.5 μM NAA or 5 μM ACC, root elongation was inhibited by 90% and 53% respectively, but the same treatments promoted swelling by 187% and 140% respectively. Furthermore, 1 μM ACC was shown to promote inhibition of root elongation without affecting swelling. The ethylene antagonist STS (silver thiosulfate) did not affect elongation in control or NAAtreated roots, but increased ethylene production and swelling. These results indicate that longitudinal and radial expansion could be independently controlled.
Go to article

This page uses 'cookies'. Learn more