An attempt was made to determine the vertical momentum and heat exchange in the near-ground atmosphere layer in the specific conditions of a sub-Antarctic island. For this purpose, some of the results of the measurements of temperature and wind speed carried out at the levels 10, 2, 0.5 and 0.05 m, during the IVth Antarctic Expedition of the Polish Academy of Sciences in March 1980, were used. The vertical gradients of the two elements and the wind stress and the heat flux in the layers under study, were calculated.
The text discusses the problems of sensory processing disorders (SPD) and their impact on difficulties children have at school. Individual categories of sensory processing disorders were characterized and examples of behavior of children who may have those problems were described. Certain strategies which teachers can use when working with a child with SI disorders were also offered. It should be noted that the early diagnosis of symptoms that may indicate the occurrence of sensory processing disorders, followed by apt diagnosis and therapy allow children to function properly in the school environment and positively influence their self-esteem. This in turn facilitates the process of learning and contributes future success.
Silicon – molybdenum cast iron commonly called SiMo due to its unique properties has becoming more and more interesting engineering material. The history and development of this alloy is relatively long but, due to the significant difficulties during the manufacturing process resulting in the lower final quality than expected, it has not been applied to often in practice. The biggest challenge is its brittleness as a result of the carbides precipitations. During last few years, thanks to the many important researches made and the general foundry technology development, the interest in SiMo iron has been rapidly growing, especially for the castings for heavy duty applications like corrosion, high temperature and wear abrasion resistant parts. In the article the heat treatment attempts to improve the microstructure of SiMo castings has been presented. The goal was to destroy or at least to refine and uniformly distribute the carbides precipitations to improve mechanical properties of the exhaust manifold castings for the cars. The experiments were carried out for the alloy contains approx. 4% Si, 1% Mo and 3.2%C. The range of the research included: hardness measuring, standard mechanical properties and microstructure for as-cast state and after that the subsequent heat treatment process with another properties check. The result of the heat treatment was the elimination of pearlite from the metal matrix. Moreover, the changes of the carbide molybdenum – rich phase morphology were observed. The dispersion of the carbides precipitations in the carbides area was observed. The experiments proved the possibility to control the microstructure and the mechanical properties of the SiMo castings by means of heat treatment but only to some extent.
The rheological properties of self-compacting concrete are closely influenced by temperature and the time. Previous studies which aim was to research the effect of temperature on self-compacting concrete workability, showed that the behaviour of fresh SCC at varying temperatures differs from that of normal vibrated concrete. The paper presents the study of rheological properties of fresh self-compacting concrete mixtures made with portland, blast furnace and component cement. Two types of superplasticizers were used. It was proven that temperature has a clear effect on workability; it can be reduced by selecting the appropriate superplasticizer and cement.
The effect of cobalt aluminate inoculant addition and melt-pouring temperature on the structure and mechanical properties of Ni-based superalloy was studied. The first major move to control the quality of investment cast blades and vanes was the control of grain size. Cobalt aluminate (CoAl2O4) is the most frequently utilized inoculant in the lost-wax casting process of Ni-based superalloys. The inoculant in the prime coat of moulds and pouring temperature play a significant role in grain size control. The finest surface grains were obtained when the internal surface of shell mould was coated with cobalt aluminate and subsequently pouring was at 1480°C. The influence of selected casting parameters and inoculant addition on mechanical properties was investigated on the basis of tensile, creep and hardness testing. The effect of grain refinement on mechanical properties were consistent with established theories. Tests conducted at ambient temperature indicated a beneficial effect of grain refinement both on tensile strength and hardness. In contrast at elevated temperature during creep, the reverse trend was observed.
Holoparasitic genera within the family Orobanchaceae are characterized by greatly reduced vegetative organs; therefore, molecular analysis has proved to be a useful tool in solving taxonomic problems in this family. For this purpose, we studied all species of the genera Orobanche and Phelipanche occurring in Central Europe, specifically in Poland, the Czech Republic, Slovakia, and Austria, supplemented by samples mainly from Spain, France, Germany, and Ukraine. They were investigated using nuclear sequences (ITS region) and a plastid trnLtrnF region. The aim of this study was to examine phylogenetic relationships within Orobanche and Phelipanche from Central Europe; we focused on problematic species and aggregates, recent taxonomic changes in these (rank and secondary ranks), and host ranges. The most interesting results concern the exlusion of O. mayeri from O. alsatica aggr. Additionally, following the rules of traditional taxonomy, the correct names and types of some secondary ranks are given and, as a result of this, a new combination below the Phelipanche genus is made (P. sect. Trionychon). The host ranges of the investigated species in Central Europe include 102 species from 12 families, most often from Asteraceae. For this purpose, ca. 400 localities were examined in the field. Moreover, data acquired from the literature and European and Asian herbaria were used.
Abstract The male-specific DNA markers are very useful in molecular sexing of non-flowering plants and seeds of dioecious species. In this paper we identified ten Y chromosome-specific RAPD primers suitable for identification of male plants in three Cannabaceae species with sex chromosomes (Humulus lupulus, XX/XY; H. japonicus, XX/XY1Y2; Cannabis sativa, XX/XY). Basing on the nucleotide sequence of the OPJ-09 RAPD product we developed the HJY09 SCAR marker, which is very efficient in sexing of Japanese hop.
HY2SEPS was an EU-funded project directed at the reduction of CO2 emissions. The principal objective of the project was to develop a hybrid membrane-adsorptive H2/CO2 separation technique that would form an integral element of the pre-combustion process. Specific tasks included the derivation of simplified mathematical models for the membrane separation of H2/CO2 mixtures. In the present study one of the developed models is discussed in detail, namely that with the countercurrent plug flow of the feed and the permeate. A number of simulations were carried out concerning the separation of binary mixtures that may appear following steam conversion of methane. The numerical results were then compared with the experimental data obtained by FORTH/ICEHT. The estimated fluxes of pure CO2, H2, CH4 and N2 are shown alongside those measured experimentally as a function of temperature and CO2 partial pressure in Figs 2 - 7. It is concluded that, in general, CO2 flux increases monotonically with both temperature and CO2 partial pressure. It is also found that the fluxes of hydrogen, methane and nitrogen reach a minimum at a temperature slightly above 323 K. Overall, a good agreement was obtained between the simulations and experiments.
Results are presented concerning the separation of the mixtures of carbon dioxide, nitrogen and oxygen in membrane modules with modified polysulphone or polyimide as active layers. The feed gas was a mixture with composition corresponding to that of a stream leaving stage 1 of a hybrid adsorptivemembrane process for the removal of CO2 from dry flue gas. In gas streams containing 70 vol.% of CO2, O2 content was varied between 0 and 5 vol.%. It is found that the presence of oxygen in the feed gas lowers the purity of the product CO2 in all the modules studied, while the recovery depends on the module. In the PRISM module (Air Products) an increase in O2 feed concentration, for the maximum permeate purity, led to a rise in CO2 recovery, whereas for the UBE modules the recovery did not change.