The effect of pressure on heat transfer during pool boiling of water-Al2O3 and water-Cu nanofluids on stainless steel smooth tube

Journal title

Chemical and Process Engineering




No 4 December



pool boiling ; nanofluids ; operating pressure

Divisions of PAS

Nauki Techniczne




Polish Academy of Sciences Committee of Chemical and Process Engineering




Artykuły / Articles


ISSN 0208-6425


Ahmed O. (2010), The effect of experimental techniques on the pool boiling of nanofluids, null. ; Bang I. (2005), Boiling heat transfer performance and phenomena of Al<sub>2</sub>O<sub>3</sub>- water nano-fluids from a plain surface in a pool, Int. J. Heat Mass Transf, 48, 2407, ; Benjamin R. (1997), Nucleation site density in pool boiling of saturated pure liquids: effect of surface microroughness and surface and liquid physical properties, Exp. Thermal Fluid Sci, 15, 32, ; Bergles A. (1985), Techniques to augment heat transfer. Handbook of heat transfer applications, 3. ; Bi S. (2011), Performance of a domestic refrigerator using TiO2-R600a nano-refrigerant as working fluid, Energy Conversion and Management, 52, 733, ; Choi S. (1995), Developments and Applications of Non-Newtonian Flows, 99. ; Cieśliński J. (2007), Simulation of temperature field in cylindrical boiling heating section, Turbulence: Int. J, 12, 59. ; Cieśliński J. (2011), Pool boiling of water-Al<sub>2</sub>O<sub>3</sub>and water-Cu nanofluids on horizontal smooth tubes, Nanoscale Research Letters, 6, 220, ; Cieśliński J. (2012), Effect of nanofluid concentration on two-phase thermosyphon heat exchanger performance, null. ; Coursey J. (2008), Nanofluid boiling: The effect of surface wettability, Int. J. Heat Fluid Flow, 29, 1577, ; Das S. (2003), Pool boiling characteristics of nano-fluids, Int. J. Heat Mass Transf, 46, 851, ; Das S. (2008), Survey on nucleate pool boiling of nanofluids: the effect of particle size relative to roughness, J. Nanopart. Res, 10, 1099, ; Hadad K. (2010), Neutronic study of nanofluids application to VVER-1000, Annals of Nuclear Energy, 37, 1447, ; Judd R. (1976), A comprehensive model for nucleate pool boiling heat transfer including microlayer evaporation, ASME J. Heat Transf, 98, 623, ; Kang S. (2006), Experimental investigation of silver nano-fluid on heat pipe thermal performance, Appl. Thermal Eng, 26, 2377, ; Kashinath M. R., 2006. <i>Parameters affecting critical heat flux of nanofluids: heater size, pressure, orientation and anti-freeze addition</i>, MSc Thesis, The University of Texas at Arlington. ; Kathiravan R. (2010), Preparation and pool boiling characteristics of copper nanofluids over a flat plate heater, Int. J. Heat Mass Transf, 53, 1673, ; Kim S. (2007), Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux, Int. J. Heat Mass Transfer, 50, 4105, ; Kim S. (2010), Subcooled flow boiling heat transfer of dilute alumina, zinc oxide, and diamond nanofluids at atmospheric pressure, Nuclear Eng. Des, 240, 1186, ; Kleinstreuer C. (2011), Experimental and theoretical studies of nanofluid thermal conductivity enhancement: A review, Nanoscale Res. Lett, 6, 229, ; Kwark S. (2010), Pool boiling characteristics of low concentration nanofluids, Int. J. Heat Mass Transfer, 53, 972, ; Leong K. (2010), Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator), Applied Thermal Engineering, 30, 2685, ; Li C. (2003), Experimental investigations on boiling of nano-particle suspensions, null. ; Liu Z.-H. (2010), Boiling characteristics of carbon nanotube suspensions under subatmospheric pressures, Int. J. Thermal Sci, 49, 1156, ; Liu Z. (2008), Sorption and agglutination phenomenon of nanofluids on a plain heating surface during pool boiling, Int. J. Heat Mass Transf, 51, 2593, ; Liu Z. (2007), Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface, Int. J. Multiphase Flow, 33, 1284, ; Lotfi H. (2009), Boiling heat transfer on a high temperature silver sphere in nanofluid, Int. J. Thermal Sci, 48, 2215, ; Marto P. (1992), Nucleate boiling characteristics of R-113 in small tube bundle, Transactions ASME J. Heat Transf, 114, 425, ; Narayan G. (2008), Effect of surface orientation on pool boiling heat transfer of nanoparticle suspensions, Int. J. Multiphase Flow, 34, 145, ; Shi M. (2006), Experimental study of pool boiling heat transfer for nanoparticle suspensions on a plate surface, null. ; Trisaksri V. (2009), Nucleate pool boiling heat transfer of TiO<sub>2</sub>-R141b nanofluids, Int. J. Heat Mass Transf, 52, 1582, ; Vassallo P. (2004), Pool boiling heat transfer experiments in silica-water nano-fluids, Int. J. Heat Mass Transf, 47, 407, ; Wang C. (1993), Effect of surface wettability on active nucleation site density during pool boiling of saturated water, ASME. J. Heat Transf, 115, 659, ; Wen D. (2005), Experimental investigation into the boiling heat transfer of aqueous based γ-alumina nanofluids, J. Nanopart. Res, 7, 265, ; Yang X. (2011), Application of functionalized nanofluid in thermosyphon, Nanoscale Res. Lett, 6, 494, ; You S. (2003), Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer, Appl. Physics Lett, 83, 3374,