TitleResearch on Vibration Properties of Copper-Titanium Alloys
Journal titleArchives of Metallurgy and Materials
NumerNo 1 March
Divisions of PASNauki Techniczne
PublisherCommitee on Metallurgy of Polish Academy of Sciences ; Institute of Metallurgy and Materials Science of Polish Academy of Sciences
ReferencesZawisza (2015), Energy loss and the choice of damper of torsional vibration combustion engines State, Solid Phenomena, 236. ; Kozłowski (2015), Parametric sensitivity analysis of ATN PRT vehicle ( automated transit network - personal rapid transit ) of, Journal Vibroengineering, 17, 1436. ; Golański (2014), Mechanical Properties of VM steel after hrs of ageing at temperature, Arch Metall Mater, 30, 12. ; Pankiewicz (2014), Modeling of powertrain system dynamic behavior with torsional vibration damper Materials, Advanced Research, 1036. ; Fornalczyk (2015), Investigation of the influence of supply parameters on the velocity of molten metal in a metallurgical reactor used for platinum recovery of Civil and Mechanical, Archives Engineering, 15, 171. ; Kłaczyński (2013), Artificial intelligence and learning systems methods in supporting long - term acoustic climate monitoring A, Acta Physica Polonica, 123. ; Węgrzyn (2010), Oxide inclusions in steel welds of car body, Mat Sci Forum, 6, 585, doi.org/10.4028/www.scientific.net/MSF.636-637.585 ; Oleksiak (2014), The obtained of concentrates containing precious metals for pyrometallurgical processing, Metalurgija, 53, 605. ; Oleksiak (2015), Effects of a reducer type on copper flash smelting slag decopperisation, Metalurgija, 54, 116. ; Konieczny (2013), Possibility to Control and Adjust the Suspensions of Vehicles Edited by : Activities of Transport Telematics Book Series : Communications in Computer and Information, Science, 395. ; Tuszyński (2015), Norbert Wieczorek The effect of WC / C coating on the wear of bevel gears used in coal mines - Medziagotyra, Mater Sci, 21, 358. ; Doleček (2011), Experimental Research of Harmonic Spectrum of Currents at Traction Drive with PMSM, Radioengineering, 20, 512. ; Klimpel (2006), The study of the technology of laser and plasma surfacing of engine valves face made of steel using cobalt - based powders, Mater Process Technol, 40, 175. ; Golanski (2012), Mechanical properties of GX cast steel after different heat treatments, Materials Science, 12, 384, doi.org/10.1007/s11003-012-9517-7 ; Batra (2005), Microstructure and properties of Cu - Ti - Co alloy and A, Materials Science Engineering, 402. ; Konieczny (2013), Application of the vibration test in the evaluation of the technical condition of shock absorbers built into the vehicle of, Journal vibroengineering, 15, 2042. ; Burdzik (2014), Analysis of impact of chosen parameters on the wear of camshaft, Arch Metall Mater, 59. ; Jedliński (2015), Application of vibration signal in the diagnosis of IC engine valve clearance of, Journal Vibroengineering, 17, 175. ; Szkliniarz (2014), Characteristics of plasticity of hot deformed Cu - Ti alloys of and, Archives Metallurgy Materials, 59, 1113, doi.org/10.2478/amm-2014-0223 ; Burdzik (2014), Identification of structure and directional distribution of vibration transferred to car - body from road roughness submitted to of, Journal Vibroengineering, 16, 324. ; Dąbrowski (2015), The choice of vibroacoustic signal measures in mechanical fault diagnosis of diesel engines State, Solid Phenomena, 236. ; Węgrzyn (2013), Oxygen in steel WMD after welding with micro - jet cooling, Arch Metall Mater, 58. ; Kłaczyński (2012), Detection and classification of selected noise sources in long - term acoustic climate monitoring A, Acta Physica Polonica, 121. ; Łabaj (2014), The role of a gas phase in the evaporation process of volatile components of the metal bath, Metalurgija, 53, 215. ; Węgrzyn (2015), Mechanical properties of shaft surfacing with micro - jet cooling Kauno Technologijos Universitetas, Mechanika, 21, 419, doi.org/10.5755/j01.mech.21.5.9545 ; Blacha (2013), Effects of pressure on the kinetics of manganese evaporation from the OT alloy And, Archives Of Metallurgy Materials, 58, 197, doi.org/10.2478/v10172-012-0173-6 ; Burdzik (2013), Research on the influence of engine rotational speed to the vibration penetration into the driver via feet - multidimensional analysis of, Journal Vibroengineering, 15, 2114. ; Wieczorek (2014), The role of operational factors in shaping of wear properties of alloyed Austempered Ductile Iron Part I Experimental studies abrasive wear of Austempered Ductile Iron in the presence of loose quartz abrasive of and, Archives Metallurgy Materials, 59, 1665, doi.org/10.2478/amm-2014-0281 ; Nagarjuna (2002), Effect of cobalt addition on the age hardening of Cu - Ti alloy of Materials, Journal Science, 4, 37.